All About Pocket Knives Premium Subscriptions
Shop AAPK Stores by:
Pattern
AAPK on Facebook

5th Generation Bulldog Brand Knives

Bulldog Brand Genuine Heart Abalone Stockman Knife1 Of 12 Genuine Heart Abalone Stockman
This is a 3 5/8 inch closed 3 Blade Stockman. This knife features the Double Dog Head Tang Stamp. The master blade has NO ETCH and is engraved with ?1 OF 12? on the reverse. The handles are Genuine Green Heart Abalone with Short Heraldic Shield. This is a RARE knife, only 12 knives were made in this configuration.

Bulldog Brand Tennessee Walking Horse Copperhead Knife3 3-4 Copperhead Tennessee Walking Horse
This is a 3 ? inch closed 2 Blade Copperhead. This knife has the Double Dog Head tang stamp. The master blade is etched with the Tennessee Walking Horse etch. The handles are Winterbottom Stag with a Crest shield.

Bulldog Brand Kentucky Thoroughbred Congress Knife3 3-4 Kentucky Thoroughbred Congress 1 OF 4
This is a 3 3/4 inch 4 Blade Congress Kentucky Thoroughbred knife. Features the Double Dog Head tang stamp. The master blade is etched with the Kentucky Thoroughbred etch. The reverse of the master blade is engraved with "1 of 4". The handles are Genuine Stag with a Heraldic Shield. This is a very low run knife with only 4 made!

Bulldog Brand Tennessee Walking Horse Trapper Knife4 1/8 Trapper Tennessee Walking Horse
This is a 4 1/8 inch closed 2 Blade Trapper. This knife has the Double Dog Head tang stamp. The master blade is etched with the Tennessee Walking Horse etch. The handles are Winterbottom Stag with a Crest Shield.

Bulldog Brand Excelsior Whittler KnifeGreat Olbertz Pattern
HAND MADE KNIFE in the Friedrich Olbertz factory where Bulldog Brand and Fightn? Rooster knives are made. This is the 3 blade 4 1/2 inch Whittler, The Excelsior model. The tang is stamped with Excelsior Knife Co. stamp with a reverse frost etch on the master blade of The Excelsior. The handles are Genuine Stag with a Bowtie shield.

Bulldog Brand Oystershell Canoe KnifeOystershell 1 Blade Canoe
This is a 3 1/2 inch SINGLE blade Canoe. The Single blade has the Standing Dog 2000 tang stamp. The SINGLE blade has the RARE Standing Dog Bulldog Brand etch. The reverse is engraved with 1 OF 7. The handles are Oystershell Celluloid with the Crest Shield. This is a RARE 1 Blade Canoe that was made at the start of the Fifth Generation. This is NOT a Lockback, made in 2000, only 7 were made.

Bulldog Brand Prototype Elephant Toe KnifeBulldog Knife 4 1/4 inch Elephant Toe PROTOTYPE
This is a 4 1/4 inch closed 2 blade Elephant Toe. The master blade is etched with the full color Elephant etch with Prototype engraved on the reverse. The tang is stamped with the Double Dog Head Stamp. The handles are Cranberry Swirl celluloid with a bowtie shield.

Bulldog Brand Prototype Genuine Heart Abalone Stockman KnifePrototype Genuine Heart Abalone Stockman
This is a 3 5/8 inch closed 3 Blade Stockman. This knife features the Double Dog Head Tang Stamp. The master blade has NO ETCH and is engraved with "Prototype" on the reverse. The handles are Genuine Green Heart Abalone with NO Shield. This is a RARE knife, only 1 prototype and 4 others were made in this configuration for a total of only 5 made.

Bulldog Brand Purple Swirl 1 Blade Canoe KnifePurple Swirl 1 Blade Canoe
This is a 3 1/2 inch SINGLE blade Canoe. The Single blade has the Standing Dog 2000 tang stamp. The SINGLE blade has the RARE Standing Dog Bulldog Brand etch. The reverse is engraved with 1 OF 7. The handles are Purple Swirl Celluloid with the Crest Shield. This is a RARE 1 Blade Canoe that was made at the start of the Fifth Generation. This is NOT a Lockback, made in 2000, only 7 were made.

Bulldog Brand Transition Prototype Winter Bottom Stag Trapper KnifeBulldog Trapper Winter Bottom Stag TRANSITION ~ PROTOTYPE
This is a 4 1/8 inch closed Trapper. This knife features the Double Dog tang stamp on the master blade and the Standing Dog 2000 tang stamp on the secondary blade. The blades have no blade etch and the master blade is engraved "Prototype Winterbottom Stag" on the reverse. The handles are WinterBottom Stag with the round Bulldog Shield.

Bulldog Brand Congress Factory Error Knife3 1/2 Inch Bone Congress Factory Error
This is a 4 blade Congress. The overall length closed is 3 1/2 inches. The master blade is missing the frosted etch of Fighting Pit Bulls. The Blades are also from 1995, yet the bar shield says 25 years. The reverse of the master blade is engraved with ?Prototype?. The handles are Genuine Bone. This knife comes with a COA. This is a RARE factory error and this knife is very RARE, being 1 of 2 made.

Bulldog Brand Himalayan Sheephorn Congress Knife3 1/2 Inch Himalayan Sheephorn Congress
This is a 4 blade Congress. The overall length closed is 3 1/2 inches. The master blade has No Etch and No Shield. The reverse of the master blade is engraved with ?Prototype?. The handles are Genuine Himalayan Sheephorn. This knife comes with a COA.

Bulldog Brand Black Lip Pearl Copperhead Knife3 3/4" Copperhead Black Lip Pearl
This is a 3 3/4 inch closed 2 blade Copperhead. This knife has the discontinued Fighting Bulldog tang stamp. The master blade features the frosted Pit-Bull Trademark etch. The reverse of the master blade is engraved with ?Prototype?. The handles are Black Lip Pearl. This knife comes with a COA.

Bulldog Brand Heart Abalone Copperhead Knife3 3/4 Inch Copperhead Heart Abalone
This is a 3 3/4 inch closed 2 blade Copperhead. This knife has the discontinued Fighting Bulldog tang stamp. The master blade features the frosted Pit-Bull Trademark etch. The reverse of the master blade is engraved with ?Prototype?. The handles are Genuine Heart Abalone. This knife comes with a COA. This knife has a Heraldic Shield, I have another without a shield that is very rare.

Bulldog Brand Rare No Shield Copperhead Knife3 3/4 No Shield Copperhead Heart Abalone
This is a 3 3/4 inch closed 2 blade Copperhead. This knife has the discontinued Fighting Bulldog tang stamp. The master blade features the frosted Pit-Bull Trademark etch. The reverse of the master blade is engraved with "Prototype". The handles Genuine Heart Abalone. This knife comes with a COA. This knife does not have a shield and is 1 of 2 made, so very RARE. A special COA confirms this. I have another with a shield that is not as rare.

Bulldog Brand Black Lip Pearl Kentucky Derby Sowbelly Knife3 3/8 Kentucky Derby Sowbelly Black lip pearl
This is a 3 3/8 inch closed 3 Blade Kentucky Derby Sowbelly. This knife features the discontinued Fighting Bulldog tang stamp. The master blade features the frosted Pit-Bull Trademark etch. The reverse of the master blade is engraved with ?Prototype?. The handles are Black Lip Pearl with no shield. This knife comes with a COA.

Bulldog Brand Mastodon Bark Ivory Kentucky Derby Sowbelly Knife3 3/8 Kentucky Derby Sowbelly Mastodon Bark Ivory
This is a 3 3/8 inch closed 3 Blade Kentucky Derby Sowbelly. This knife features the discontinued Fighting Bulldog tang stamp. The master blade features the frosted Pit-Bull Trademark etch. The reverse of the master blade is engraved with ?Prototype?. The handles are Brown Bark Mastodon Ivory with no shield. This knife comes with a COA. This is a 1 of 2 made, a very RARE knife and has a special COA to that fact. This knife is also pictured with the Mastodon Ivory knives.

Bulldog Brand Himalayan Sheephorn Congress Knife3 5-8 Himalayan Sheephorn Congress
This is a 3 5/8 inch closed 4 blade Congress. The master blade has the Pit Bull Trademark frosted etch and "Prototype" is engraved on the reverse side. The tang is stamped with the Fighting Dogs Stamp on all tangs. The handles are Himalayan Sheephorn with the bar Shield. This knife comes with a COA.

Bulldog Brand Square Bolster Stockman Knife3 5-8 Square Bolster Stockman Black Lip Pearl
This is a 3 5/8 inch closed 3 blade Square Bolster Stockman. This knife features the discontinued Fighting Bulldog tang stamp. The master blade features the frosted Pit-Bull Trademark etch. The reverse of the master blade is engraved with "Prototype". The handles are Black Lip Pearl with no shield. This knife comes with a COA.

Bulldog Brand Sheephorn Square Bolster Stockman Knife3 5-8 Square Bolster Stockman Himalayan Sheephorn
This is a 3 5/8 inch closed 3 blade Square Bolster Stockman. This knife features the discontinued Fighting Bulldog tang stamp. The master blade features the frosted Pit-Bull Trademark etch. The reverse of the master blade is engraved with ?Prototype?. The handles are Himalayan Sheephorn. This knife comes with a COA.

Bulldog Brand AAA1 Pearl Congress Knife3 7-8 AAA1 Pearl Congress
This is a 3 7/8 inch closed 4 blade Congress. This knife has the discontinued Fighting Bulldog tang stamp. The master blade features the frosted Pit-Bull Trademark etch. The reverse of the master blade is engraved with "Prototype". The handles are AAA1 Quality Pearl with no shield. This knife comes with a COA.

Bulldog Brand Apple Coral Congress Knife3 7-8 Apple Coral Congress
This is a 3 7/8 inch closed 4 blade Congress. This knife that has the discontinued Fighting Bulldog tang stamp. The master blade features the frosted Pit-Bull Trademark etch. The reverse of the master blade is engraved with "Prototype". The handles are Genuine Apple Coral with no shield. This knife comes with a COA.

Bulldog Brand Apple Coral Cuttin' Horse Sowbelly Knife3 7-8 Apple Coral Cuttin' Horse
This is a 3 7/8 inch closed 3 Blade Cuttin' Horse Sowbelly. This knife features the discontinued Fighting Bulldog tang stamp. The master blade features the frosted Pit-Bull Trademark etch. The reverse of the master blade is engraved with ?Prototype?. The handles are Genuine Apple Coral with a Bomb Shield with fancy pinched Bolsters. This knife comes with a COA.

Bulldog Brand Cuttin' Horse Sowbelly Knife3 7-8 Heart Abalone Cuttin' Horse
This is a 3 7/8 inch closed 3 Blade Cuttin' Horse Sowbelly. This knife features the discontinued Fighting Bulldog tang stamp. The master blade features the frosted Pit-Bull Trademark etch. The reverse of the master blade is engraved with "Prototype". The handles are Genuine Heart Abalone with a Bomb Shield with fancy pinched Bolsters. This knife comes with a COA.

Bulldog Brand Prototype Sheephorn Cuttin' Horse Sowbelly Knife3 7-8 Himalayan Sheephorn Cuttin' Horse
This is a 3 7/8 inch closed 3 Blade Cuttin' Horse Sowbelly. This knife features the discontinued Fighting Bulldog tang stamp. The master blade features the frosted Pit-Bull Trademark etch. The reverse of the master blade is engraved with "Prototype". The handles are Genuine Himalayan Sheephorn with a Bomb Shield with fancy pinched Bolsters. This knife comes with a COA.

Bulldog Brand Heart Abalone Stockman Knife4 1-4 Heart Abalone Stockman
This is a 4 1/4 inch closed 3 blade Stockman. This knife has the discontinued Fighting Bulldog tang stamp. The master blade features the frosted Pit-Bull Trademark etch. The reverse of the master blade is engraved with "Prototype". The handles are Genuine Heart Abalone with a Heraldic Shield. This knife comes with a COA.

Bulldog Brand Apple Coral Trapper Knife - Heraldic Shield4 1-8 Apple Coral Trapper
This is a 4 1/8 inch closed 2 Blade Trapper. This knife has the discontinued Fighting Bulldog tang stamp. The master blade features the frosted Pit-Bull Trademark etch. The reverse of the master blade is engraved with "Prototype". The handles are Genuine Apple Coral with a Heraldic Shield. This knife comes with a COA.

Bulldog Brand Heart Abalone Trapper Knife - Heraldic Shield4 1-8 Heart Abalone Trapper
This is a 4 1/8 inch closed 2 Blade Trapper. This knife has the discontinued Fighting Bulldog tang stamp. The master blade features the frosted Pit-Bull Trademark etch. The reverse of the master blade is engraved with ?Prototype?. The handles are Genuine Heart Abalone with a Heraldic Shield. This knife comes with a COA.

Bulldog Brand Interior Mastodon Ivory Trapper Knife - Heraldic Shield4 1-8 Trapper Interior Mastodon Ivory Production
This is a 4 1/8 inch closed 2 Blade Trapper. This knife has the discontinued Fighting Bulldog tang stamp. The master blade features the frosted Pit-Bull Trademark etch. The handles are Interior Mastodon Ivory with a Heraldic Shield. This knife comes with a COA. This knife is also pictured with the Mastodon Ivory knives.

Bulldog Brand Prototype Sheephorn Stockman Knife4 Inch Himalayan Sheephorn Stockman
This is a 4 inch closed 3 blade Stockman. The master blade has the Pit Bull Trademark Frosted etch and "Prototype" is engraved on the reverse side. The tang is stamped with the Fighting Dogs Tang Stamp on all tangs. The handles Himalayan Sheephorn with round bolsters and the Banner Shield.

Bulldog Brand Black Lip Pearl Muskrat Knife4 Inch Muskrat Black Lip Pearl 1 of 7
This is a 4 inch closed 2 Blade Muskrat. This knife has the discontinued Fighting Bulldog tang stamp. The master blade features the frosted Pit-Bull Trademark etch. The reverse of the master blade is engraved with ?Prototype 1 of 7?. The handles are Black Lip Pearl with no shield. This knife comes with a COA. A RARE knife with only 7 made.

Bulldog Brand Mammoth Ivory Baby Bullet Trapper KnifeBark Mammoth Ivory 2 3/4 Baby Bullet
New in 2005 from Bulldog Brand Knives, this is a 2 3/4 inch closed 2 blade Baby Bullet Trapper. This has Bark Mammoth Ivory handles with a crest shield. The master clip blade is black laser etched on the front with the Fighting Bulldog logo, and "Bulldog Brand". The back is engraved with "Prototype". All tangs have the Fighting Bulldogs Stamp. The reverse of 1 tang has 2005 to prevent confusion with other model years. There was only 10 of these prototype models made, 10 each of 10 different handle materials. This collection has the whole set. This is 1 of 10. This is listed in the Mastodon Ivory Knives also.

Bulldog Brand Bark Mammoth Ivory Stockman KnifeBark Mammoth Ivory 3 3/8 Stockman
New in 2005 from Bulldog Brand Knives, this is a 3 3/8 inch closed 3 blade Stockman. This has a Bark Mastodon Ivory handle with a crest shield. The master clip blade is black laser etched on the front with the Fighting Bulldog logo, and "Bulldog Brand". The back is engraved with "Prototype". All tangs have the Fighting Bulldogs Stamp. The reverse of 1 tang has 2005 to prevent confusion with other model years. There was only 10 of these prototype models made, 10 each of 10 different handle materials. This collection has the whole set. This is 1 of 10. This is listed in the Mastodon Ivory Knives also.

2005 Bulldog Brand Bark Mammoth Ivory Toothpick KnifeBark Mammoth Ivory 4 1/2 Inch Toothpick
New in 2005 from Bulldog Brand Knives, this is a 4 1/2 inch closed Toothpick. This has a Bark Mammoth Ivory handle with a crest shield. The single master blade is black laser etched on the front with the Fighting Bulldog logo, and "Bulldog Brand". The back is engraved with "Prototype". The tang has the Fighting Bulldogs Stamp. The reverse of the tang has 2005 to prevent confusion with other model years. There was only 10 of these prototype models made, 10 each of 10 different handle materials. This is 1 of 10. This is listed in the Mastodon Ivory Knives also.

Bulldog Brand Blue Giraffe Bone Baby Bullet Trapper KnifeBlue Giraffe Bone 2 3/4 Inch Baby Bullet
New in 2005 from Bulldog Brand Knives, this is a 2 3/4 inch closed 2 blade Baby Bullet Trapper. This has Blue Giraffe Bone handles with a crest shield. The master clip blade is black laser etched on the front with the Fighting Bulldog logo, and "Bulldog Brand". The back is engraved with "Prototype". All tangs have the Fighting Bulldogs Stamp. The reverse of 1 tang has 2005 to prevent confusion with other model years. There was only 10 of these prototype models made, 10 each of 10 different handle materials. This collection has the whole set. This is 1 of 10.

Bulldog Brand Blue Giraffe Bone Stockman KnifeBlue Giraffe Bone 3 3/8 Inch Stockman
New in 2005 from Bulldog Brand Knives, this is a 3 3/8 inch closed 3 blade Stockman. This has Blue Giraffe Bone handles with a crest shield. The master clip blade is black laser etched on the front with the Fighting Bulldog logo, and "Bulldog Brand". The back is engraved with "Prototype". All tangs have the Fighting Bulldogs Stamp. The reverse of 1 tang has 2005 to prevent confusion with other model years. There was only 10 of these prototype models made, 10 each of 10 different handle materials. This collection has the whole set. This is 1 of 10.

Bulldog Brand Brown Giraffe Bone Baby Bullet Trapper KnifeBrown Giraffe Bone 2 3/4 Inch Baby Bullet
New in 2005 from Bulldog Brand Knives, this is a 2 3/4 inch closed 2 blade Baby Bullet Trapper. This has Brown Giraffe Bone handles with a crest shield. The master clip blade is black laser etched on the front with the Fighting Bulldog logo, and "Bulldog Brand". The back is engraved with "Prototype". All tangs have the Fighting Bulldogs Stamp. The reverse of 1 tang has 2005 to prevent confusion with other model years. There was only 10 of these prototype models made, 10 each of 10 different handle materials. This collection has the whole set. This is 1 of 10.

Bulldog Brand Brown Giraffe Bone Stockman KnifeBrown Giraffe Bone 3 3/8 Inch Stockman
New in 2005 from Bulldog Brand Knives, this is a 3 3/8 inch closed 3 blade Stockman. This has Brown Giraffe Bone handles with a crest shield. The master clip blade is black laser etched on the front with the Fighting Bulldog logo, and "Bulldog Brand". The back is engraved with "Prototype". All tangs have the Fighting Bulldogs Stamp. The reverse of 1 tang has 2005 to prevent confusion with other model years. There was only 10 of these prototype models made, 10 each of 10 different handle materials. This collection has the whole set. This is 1 of 10.

Bulldog Brand Chip Abalone Baby Bullet Trapper KnifeChip Abalone 2 3/4 Inch Baby Bullet
New in 2005 from Bulldog Brand Knives, this is a 2 3/4 inch closed 2 blade Baby Bullet Trapper. This has Chip Abalone handles with a crest shield. The master clip blade is black laser etched on the front with the Fighting Bulldog logo, and "Bulldog Brand". The back is engraved with "Prototype". All tangs have the Fighting Bulldogs Stamp. The reverse of 1 tang has 2005 to prevent confusion with other model years. There was only 10 of these prototype models made, 10 each of 10 different handle materials. This collection has the whole set. This is 1 of 10.

2005 Bulldog Brand Chipped Abalone Stockman KnifeChipped Abalone 3 3/8 Inch Stockman
New in 2005 from Bulldog Brand Knives, this is a 3 3/8 inch closed 3 blade Stockman. This has a Chipped Abalone handle with a crest shield. The master clip blade is black laser etched on the front with the Fighting Bulldog logo, and "Bulldog Brand". The back is engraved with "Prototype". All tangs have the Fighting Bulldogs Stamp. The reverse of 1 tang has 2005 to prevent confusion with other model years. There was only 10 of these prototype models made, 10 each of 10 different handle materials. This collection has the whole set. This is 1 of 10.

2005 Bulldog Brand Chip Abalone Trapper KnifeChip Abalone 4 1/2 Inch Toothpick
New in 2005 from Bulldog Brand Knives, this is a 4 1/2 inch closed Toothpick. This has a Chipped Abalone handle with a crest shield. The single master blade is black laser etched on the front with the Fighting Bulldog logo, and "Bulldog Brand". The back is engraved with "Prototype". The tang has the Fighting Bulldogs Stamp. The reverse of the tang has 2005 to prevent confusion with other model years. There was only 10 of these prototype models made, 10 each of 10 different handle materials. This is 1 of 10.

2005 Bulldog Brand Chip Abalone Doctor's KnifeChip Abalone Doctors Knife
New in 2005 from Bulldog Brand Knives, this is a 4 3/4 inch closed 2 blade Doctors Knife. This has Chipped Abalone handles with a crest shield. The Spear blade is etched on the front, with the Fighting Bulldog logo, and reads "Bulldog Brand". The back is engraved with "Prototype". The spear blade tang has the Fighting Bulldogs Stamp. The spatula tang has the Fighting Bulldogs Stamp and the reverse of the tang has 2005 to prevent confusion with other model years. There was only 10 of these prototype models made, 10 each of 10 different handle materials. This is 1 of 10.

Bulldog Brand Gray Giraffe Bone Baby Bullet Trapper KnifeGray Giraffe Bone 2 3/4 Inch Baby Bullet
New in 2005 from Bulldog Brand Knives, this is a 2 3/4 inch closed 2 blade Baby Bullet Trapper. This has Gray Giraffe Bone handles with a crest shield. The master clip blade is black laser etched on the front with the Fighting Bulldog logo, and "Bulldog Brand". The back is engraved with "Prototype". All tangs have the Fighting Bulldogs Stamp. The reverse of 1 tang has 2005 to prevent confusion with other model years. There was only 10 of these prototype models made, 10 each of 10 different handle materials. This collection has the whole set. This is 1 of 10.

Bulldog Brand Gray Giraffe Bone Stockman KnifeGray Giraffe Bone 3 3/8 Stockman
New in 2005 from Bulldog Brand Knives, this is a 3 3/8 inch closed 3 blade Stockman. This has Gray Giraffe Bone handles with a crest shield. The master clip blade is black laser etched on the front with the Fighting Bulldog logo, and "Bulldog Brand". The back is engraved with "Prototype". All tangs have the Fighting Bulldogs Stamp. The reverse of 1 tang has 2005 to prevent confusion with other model years. There was only 10 of these prototype models made, 10 each of 10 different handle materials. This collection has the whole set. This is 1 of 10.

Bulldog Brand Green Giraffe Bone Baby Bullet Trapper KnifeGreen Giraffe Bone 2 3/4 Inch Baby Bullet
New in 2005 from Bulldog Brand Knives, this is a 2 3/4 inch closed 2 blade Baby Bullet Trapper. This has Green Giraffe Bone handles with a crest shield. The master clip blade is black laser etched on the front with the Fighting Bulldog logo, and "Bulldog Brand". The back is engraved with "Prototype". All tangs have the Fighting Bulldogs Stamp. The reverse of 1 tang has 2005 to prevent confusion with other model years. There was only 10 of these prototype models made, 10 each of 10 different handle materials. This collection has the whole set. This is 1 of 10.

Bulldog Brand Green Giraffe Bone Stockman KnifeGreen Giraffe Bone 3 3/8 Inch Stockman
New in 2005 from Bulldog Brand Knives, this is a 3 3/8 inch closed 3 blade Stockman. This has Green Giraffe Bone handles with a crest shield. The master clip blade is black laser etched on the front with the Fighting Bulldog logo, and "Bulldog Brand". The back is engraved with "Prototype". All tangs have the Fighting Bulldogs Stamp. The reverse of 1 tang has 2005 to prevent confusion with other model years. There was only 10 of these prototype models made, 10 each of 10 different handle materials. This collection has the whole set. This is 1 of 10.

Bulldog Brand Genuine Heart Abalone Baby Bullet Trapper KnifeGenuine Heart Abalone 2 3/4 Inch Baby Bullet
New in 2005 from Bulldog Brand Knives, this is a 2 3/4 inch closed 2 blade Baby Bullet Trapper. This has Genuine Heart Abalone handles with a crest shield. The master clip blade is black laser etched on the front with the Fighting Bulldog logo, and "Bulldog Brand". The back is engraved with "Prototype". All tangs have the Fighting Bulldogs Stamp. The reverse of 1 tang has 2005 to prevent confusion with other model years. There was only 10 of these prototype models made, 10 each of 10 different handle materials. This collection has the whole set. This is 1 of 10.

2005 Bulldog Brand Genuine Heart Abalone Stockman KnifeGenuine Heart Abalone 3 3/8 Inch Stockman
New in 2005 from Bulldog Brand Knives, this is a 3 3/8 inch closed 3 blade Stockman. This has Genuine Heart Abalone handles with a crest shield. The master clip blade is black laser etched on the front with the Fighting Bulldog logo, and "Bulldog Brand". The back is engraved with "Prototype". All tangs have the Fighting Bulldogs Stamp. The reverse of 1 tang has 2005 to prevent confusion with other model years. There was only 10 of these prototype models made, 10 each of 10 different handle materials. This collection has the whole set. This is 1 of 10.

2005 Bulldog Brand Mammoth Ivory Baby Bullet Trapper KnifeInterior Mammoth Ivory 2 3/4 Inch Baby Bullet
New in 2005 from Bulldog Brand Knives, this is a 2 3/4 inch closed 2 blade Baby Bullet Trapper. This has Interior Mammoth Ivory handles with a crest shield. The master clip blade is black laser etched on the front with the Fighting Bulldog logo, and "Bulldog Brand". The back is engraved with "Prototype". All tangs have the Fighting Bulldogs Stamp. The reverse of 1 tang has 2005 to prevent confusion with other model years. There was only 10 of these prototype models made, 10 each of 10 different handle materials. This collection has the whole set. This is 1 of 10. This is listed in the Mastodon Ivory Knives also.

Bulldog Brand Mammoth Ivory Stockman KnifeInterior Mammoth Ivory 3 3/8 Inch Stockman
New in 2005 from Bulldog Brand Knives, this is a 3 3/8 inch closed 3 blade Stockman. This has Interior Mastodon Ivory handles with a crest shield. The master clip blade is black laser etched on the front with the Fighting Bulldog logo, and "Bulldog Brand". The back is engraved with "Prototype". All tangs have the Fighting Bulldogs Stamp. The reverse of 1 tang has 2005 to prevent confusion with other model years. There was only 10 of these prototype models made, 10 each of 10 different handle materials. This collection has the whole set. This is 1 of 10. This is listed in the Mastodon Ivory Knives also.

Bulldog Brand Mammoth Ivory Toothpick KnifeInterior Mammoth Ivory 4 1/2 Inch Toothpick
New in 2005 from Bulldog Brand Knives, this is a 4 1/2 inch closed Toothpick. This has a Interior Mammoth Ivory handle with a crest shield. The single master blade is black laser etched on the front with the Fighting Bulldog logo, and "Bulldog Brand". The back is engraved with "Prototype". The tang has the Fighting Bulldogs Stamp. The reverse of the tang has 2005 to prevent confusion with other model years. There was only 10 of these prototype models made, 10 each of 10 different handle materials. This is 1 of 10. This is listed in the Mastodon Ivory Knives also.

Bulldog Brand Pearl Baby Bullet Trapper KnifePearl 2 3/4 Inch Baby Bullet
New in 2005 from Bulldog Brand Knives, this is a 2 3/4 inch closed 2 blade Baby Bullet Trapper. This has Pearl handles with a crest shield. The master clip blade is black laser etched on the front with the Fighting Bulldog logo, and "Bulldog Brand". The back is engraved with "Prototype". All tangs have the Fighting Bulldogs Stamp. The reverse of 1 tang has 2005 to prevent confusion with other model years. There was only 10 of these prototype models made, 10 each of 10 different handle materials. This collection has the whole set. This is 1 of 10.

2005 Bulldog Brand Genuine Pearl Stockman KnifeGenuine Pearl 3 3/8 Inch Stockman
New in 2005 from Bulldog Brand Knives, this is a 3 3/8 inch closed 3 blade Stockman. This has Genuine Pearl handles with a crest shield. The master clip blade is black laser etched on the front with the Fighting Bulldog logo, and "Bulldog Brand". The back is engraved with "Prototype". All tangs have the Fighting Bulldogs Stamp. The reverse of 1 tang has 2005 to prevent confusion with other model years. There was only 10 of these prototype models made, 10 each of 10 different handle materials. This collection has the whole set. This is 1 of 10.

Bulldog Brand Tiger Coral Stockman KnifeGenuine Tiger Coral 3 3/8 Inch Stockman
New in 2005 from Bulldog Brand Knives, this is a 3 3/8 inch closed 3 blade Stockman. This has Genuine Tiger Coral handles with a crest shield. The master clip blade is black laser etched on the front with the Fighting Bulldog logo, and "Bulldog Brand". The back is engraved with "Prototype". All tangs have the Fighting Bulldogs Stamp. The reverse of 1 tang has 2005 to prevent confusion with other model years. There was only 10 of these prototype models made, 10 each of 10 different handle materials. This collection has the whole set. This is 1 of 10.

Bulldog Brand Tiger Coral Baby Bullet Trapper KnifeTiger Coral 2 3/4 Inch Baby Bullet
New in 2005 from Bulldog Brand Knives, this is a 2 3/4 inch closed 2 blade Baby Bullet Trapper. This has Tiger Coral handles with a crest shield. The master clip blade is black laser etched on the front with the Fighting Bulldog logo, and "Bulldog Brand". The back is engraved with "Prototype". All tangs have the Fighting Bulldogs Stamp. The reverse of 1 tang has 2005 to prevent confusion with other model years. There was only 10 of these prototype models made, 10 each of 10 different handle materials. This collection has the whole set. This is 1 of 10.

Bulldog Brand Lewis and Clark Swing Guard AAA Pearl Production KnifeLewis and Clark Swing Guard AAA Pearl Production
This is a 4 inch closed Lewis and Clark Swing Guard Lockback. The Single Lockback blade has the Lewis and Clark 200 Year Anniversary etch and features a swinging guard. The tang is stamped with the Fighting Pit-Bulls. The handles are AAA1 Quality Pearl that is full of color and fire with No Shield. PRODUCTION.

Bulldog Brand Lewis and Clark Swing Guard AAA Pearl Prototype KnifeLewis and Clark Swing Guard AAA Pearl PROTOTYPE
This is a 4 inch closed Lewis and Clark Swing Guard Lockback. The Single Lockback blade has the Lewis and Clark 200 Year Anniversary etch with Prototype engraved on the reverse and features a swinging guard. The tang is stamped with the Fighting Pit-Bulls. The handles are AAA1 Quality Pearl that is full of color and fire with No Shield. This knife came with a COA signed by Jim Parker.

Bulldog Brand Lewis and Clark Swing Guard Bark Mastodon Ivory Prototype KnifeLewis and Clark Swing Guard Bark Mastodon Ivory PROTOTYPE
This is a 4 inch closed Lewis and Clark Swing Guard Lockback. The Single Lockback blade has the Lewis and Clark 200 Year Anniversary etch with Prototype engraved on the reverse and features a swinging guard. The tang is stamped with the Fighting Pit-Bulls. This knife has No Shield. The handles are Bark Mastodon Ivory which is from the outside of the tusk. This knife came with a COA signed by Jim Parker. This Knife is also shown in Mastodon Ivory knives.

Bulldog Brand Lewis and Clark Swing Guard Buffalo Horn Prototype KnifeLewis and Clark Swing Guard Buffalo Horn PROTOTYPE
This is a 4 inch closed Lewis and Clark Swing Guard Lockback. The Single Lockback blade has the Lewis and Clark 200 Year Anniversary etch with Prototype engraved on the reverse and features a swinging guard. The tang is stamped with the Fighting Pit-Bulls. The handles are Buffalo Horn with a Bomb Shield. This knife came with a COA signed by Jim Parker.

Bulldog Brand Lewis and Clark Swing Guard Gold Lip Pearl Prototype KnifeLewis and Clark Swing Guard Gold Lip Pearl PROTOTYPE
This is a 4 inch closed Lewis and Clark Swing Guard Lockback. The Single Lockback blade has the Lewis and Clark 200 Year Anniversary etch with Prototype engraved on the reverse and features a swinging guard. The tang is stamped with the Fighting Pit-Bulls. The handles are Gold Lip Pearl that is full of color and fire with No Shield. This knife came with a COA signed by Jim Parker.

Bulldog Brand Lewis and Clark Swing Guard Hummingbird Celluloid KnifeLewis and Clark Swing Guard Hummingbird Celluloid Production
This is a 4 inch closed Lewis and Clark Swing Guard Lockback. The Single Lockback blade has the Lewis and Clark 200 Year Anniversary etch and features a swinging guard. The tang is stamped with the Fighting Pit-Bulls. The handles are Hummingbird Feather with the Bomb Shield. This is a PRODUCTION knife.

Bulldog Brand Lewis and Clark Swing Guard Lockback KnifeLEWIS AND CLARK SWING GUARD LOCKBACK
HAND MADE BULLDOG BRAND KNIFE! This well made Lewis and Clark Swing Guard Lockback is made of mirror polished drop forged steel. This knife is 4 inches closed. The Single Lockback blade has the Lewis and Clark 200 Year Anniversary etch and features a swinging guard. The tang is stamped with the Fighting Pit-Bulls. This knife has the Bomb Shield. The handles are beautiful matched Interior Mastodon Ivory which is from the inside of the tusk. This knife is Hand made in Solingen, Germany. It?s in perfect condition (Pristine Mint) and has never been sharpened, carried, or used. This knife is a PRODUCTION knife. This Knife is also shown in Mastodon Ivory knives.

Bulldog Brand Lewis and Clark Swing Guard Interior Mastodon Ivory Prototype KnifeLewis and Clark Swing Guard Interior Mastodon Ivory PROTOTYPE
This is a 4 inch closed Lewis and Clark Swing Guard Lockback. The Single Lockback blade has the Lewis and Clark 200 Year Anniversary etch with Prototype engraved on the reverse and features a swinging guard. The tang is stamped with the Fighting Pit-Bulls. This knife has the Bomb Shield. The handles are Interior Mastodon Ivory which is from the inside of the tusk. This knife came with a COA signed by Jim Parker. This Knife is also shown in Mastodon Ivory knives.

Bulldog Brand Customized Lewis and Clark Swing Guard Mammoth Tooth KnifeLewis and Clark Swing Guard Mammoth Tooth CUSTOM
CUSTOMIZED by Jeff Jones of Jones Cutlery. This is a 4 inch closed Lewis and Clark Swing Guard Lockback. The Single Lockback blade has the Lewis and Clark 200 Year Anniversary etch and features a swinging guard. The tang is stamped with the Fighting Pit-Bulls. The handles are Hand Selected Mammoth Tooth. The liners and backsprings have been file worked and the Bolsters have been textured by Jeff. Jeff Jones Customized. This knife is also shown in Custom Knives.

Bulldog Brand Clark Swing Guard Lockback - Pearl Prototype KnifeLEWIS AND CLARK SWING GUARD LOCKBACK Prototype Set
This picture shows the Prototype set of ?Exotic? Lewis and Clark Swing Guard PROTOTYPE Lockbacks. These knives are 4 inches closed. The Single Lockback blades have the Lewis and Clark 200 Year Anniversary etch with Prototype engraved on the reverse and features a swinging guard. The tangs are stamped with the Fighting Pit-Bulls. The handles, from top to bottom are Sambar Stag, Interior Mastodon Ivory, Bark Mastodon Ivory, Buffalo Horn, AAA1 Quality Pearl, and Gold Lip Pearl. All knives came with a COA signed by Jim Parker.

Bulldog Brand Sambar Stag Lewis and Clark Swing Guard KnifeLewis and Clark Swing Guard Sambar Stag Production
This is a 4 inch closed Lewis and Clark Swing Guard Lockback. The Single Lockback blade has the Lewis and Clark 200 Year Anniversary etch and features a swinging guard. The tang is stamped with the Fighting Pit-Bulls. The handles are Sambar Stag with a Bomb Shield. PRODUCTION KNIFE.

Prototype Bulldog Brand Genuine Stag Swing Guard KnifeLewis and Clark Swing Guard Sambar Stag PROTOTYPE
This is a 4 inch closed Lewis and Clark Swing Guard Lockback. The Single Lockback blade has the Lewis and Clark 200 Year Anniversary etch with Prototype engraved on the reverse and features a swinging guard. The tang is stamped with the Fighting Pit-Bulls. The handles are Sambar Stag with a Bomb Shield. This knife came with a COA signed by Jim Parker.

Bulldog Brand Customized Tiger Coral Swing Guard KnifeLewis and Clark Swing Lockback Tiger Coral CUSTOM
CUSTOMIZED by Jeff Jones of Jones Cutlery. This is a 4 inch closed Lewis and Clark Swing Guard Lockback. The Single Lockback blade has the Lewis and Clark 200 Year Anniversary etch and features a swinging guard. The tang is stamped with the Fighting Pit-Bulls. The handles are Hand Selected Tiger Coral re-handled by Jeff Jones. This knife is also shown in Custom Knives.

Bulldog Brand Customized Apple Coral Swing Guard KnifeLewis and Clark Swing Lockback Apple Coral CUSTOM
CUSTOMIZED by Jeff Jones of Jones Cutlery. This is a 4 inch closed Lewis and Clark Swing Guard Lockback. The Single Lockback blade has the Lewis and Clark 200 Year Anniversary etch and features a swinging guard. The tang is stamped with the Fighting Pit-Bulls. The handles are Hand Selected Apple Coral re-handled by Jeff Jones. This knife is also shown in Custom Knives.

Bulldog Brand Mastodon Bark Ivory Baby Sunfish KnifeBulldog Knife 3 Inch ~ Baby Sunfish ~ Mastodon Bark Ivory ~ 1 of 24
This is a 3 inch closed 2 blade Baby Sunfish Millennium knife. The tangs have the 2000 Standing Dog Stamp. The master blade has a full color Sunfish etched on it and is engraved with 1 of 24 on the reverse. The handles are Bark Mastodon Ivory with the Year 2000 shield. 1 of 24 made.

Bulldog Brand Gold Lip Pearl Baby Sunfish KnifeBulldog Baby Sunfish Gold Lip Pearl ~Year 2000~ Engraved Bolsters
This is a 3 inch closed 2 blade Baby Sunfish Millennium knife. The knife has the Year 2000 shield. The master blade has a full color Sunfish etched on it and is engraved with 1 of 24 on the reverse. The handles are Genuine Gold Lip Pearl and the bolsters have been Engraved. Was 1 of 24, after market engraving makes it a 1 only.

Bulldog Brand Genuine Pearl Copperhead KnifeBulldog Copperhead Genuine Pearl Year 2000
This is a 3 3/4 inch closed 2 blade Copperhead Millennium knife. This knife features the Standing Dog 2000 tang stamp. The master blade is etched with the special Anno Domini Year 2000 etch. The reverse of the main blade is etched with "Prototype". The handles are Genuine Pearl with a lot of color with the Year 2000 Shield.

Bulldog Brand Genuine Stag Copperhead KnifeBulldog Copperhead Genuine Stag Year 2000 PROTOTYPE
This is a 3 3/4 inch closed 2 blade Copperhead Millennium knife. This knife features the Standing Dog 2000 tang stamp. The master blade is etched with the special Anno Domini Year 2000 etch. The reverse of the main blade is etched with "Prototype". The handles are Genuine Stag with the Year 2000 Shield.

Bulldog Brand Genuine Stag Stockman KnifeBulldog Stockman Genuine Stag Year 2000 PROTOTYPE
This is a 3 1/2 inch closed Stockman Millennium knife features the Standing Dog 2000 tang stamp. The master Blade is etched with the special Anno Domini Year 2000 etch. The reverse of the master blade is etched with "Prototype". The handles are Genuine Stag with the Year 2000 shield.

Bulldog Brand Purple Swirl Anglo-Saxon Whittler KnifePurple Swirl Year 2000 Anglo-Saxon
This is a 5 1/4 inch closed Anglo-Saxon Whittler Millennium knife. This knife has the Year 2000 Standing Dog tang stamp. The master spear blade is etched with the special Anno Domini Year 2000 etch. The handles Purple Swirl Celluloid with the Year 2000 shield. This is a limited edition of 60 knives made.

Bulldog Brand Green Bone Prototype Stockman KnifeBulldog Stockman Green Bone Year 2000 PROTOTYPE
This is a 3 1/2 inch closed Stockman Millennium knife. This knife has the Double Dog head tang stamp. The master blade is etched with the Double Dog Head Etch. The reverse of the master blade is etched with "Prototype". The handles Green Bone with the Year 2000 shield.

Bulldog Brand Buffalo Horn Presentation Trapper KnifeBulldog Presentation Trapper Buffalo PROTOTYPE ~ COA
This Presentation Trapper Model knife features the Double Dog head tang stamp. It is 3 1/4 inches closed. The master blade has the Double Dog Head etch and is engraved PROTOTYPE on the reverse. The handles are Buffalo Horn with a Heraldic Shield. This knife came with a COA.

Bulldog Brand Abalone Presentation Trapper KnifeBulldog Presentation Trapper Genuine Abalone 1 of 5
This Presentation Trapper Model knife features the Double Dog Head tang stamp. It is 3 1/4 inches closed. The master blade has no etch but is engraved on the reverse 1 of 5. The handles are Genuine Heart Abalone with no shield. This knife came with a COA.

Bulldog Brand Genuine Stag Presentation Trapper KnifeBulldog Presentation Trapper Stag Prototype
This Presentation Trapper Model knife features the Double Dog head tang stamp. It is 3 1/4 inches closed. The master blade has the Double Dog Head etch and is engraved PROTOTYPE on the reverse. The handles are Genuine Stag with a Heraldic Shield. This knife came with a COA. There probably won't another one made like this.

Bulldog Brand Mastodon Ivory Presentation Trapper KnifeInterior Mastodon Ivory Presentation Trapper 1 OF 5
This Presentation Trapper Model knife features the Double Dog Head tang stamp. It is 3 1/4 inches closed. The master blade has no etch but is engraved on the reverse 1 of 5. The handles are Interior Mastodon Ivory with no shield. This knife is also pictured with the Mastodon Ivory knives. ONLY 5 MADE!

Bulldog Brand Abalone Viking Warncliff Whittler KnifeAbalone Viking 1 OF 33 Limited Production
This is a 3 blade Viking model Warncliff Whittler. The master blade is etched with the Double Dog Head etch and engraved 1 of 33 on the reverse. The tang is stamped with the Double Dog Head Stamp. Overall length of this knife is 3 7/8 inches closed. The handles are Genuine Abalone with a bar shield. This knife comes with a COA that states only 33 were made.

Bulldog Brand Elephant Ivory Viking Warncliff Whittler KnifeAntique Elephant Ivory Viking
This is a 3 blade Viking model Warncliff Whittler. The master blade is etched with the Double Dog Head etch. The tang is stamped with the Double Dog Head Stamp. Overall length of this knife is 3 7/8 inches closed. The handles are Antique Elephant Ivory with a bar shield. There were only 21 of these made making this a fairly rare knife.

Bulldog Brand Bark Ivory Mastodon Ivory Viking Whittler KnifeBark Mastodon Ivory Viking 1 of 33 COA
This is a 3 blade Viking model Warncliff Whittler. The master blade is etched with the Double Dog Head etch and engraved 1 of 33 on the reverse. The tang is stamped with the Double Dog Head Stamp. Overall length of this knife is 3 7/8 inches closed. The handles are Bark Mastodon Ivory which comes from the outer tusk with a bar shield. This knife comes with a COA that states only 33 were made. This knife is listed in the Mastodon Ivory knives also.

Bulldog Brand Gold Lip Pearl Seduvtress Whittler KnifeBlack Lip Pearl Seductress Production
This is a production Seductress with Black Lip Pearl handles. The master blade etch is a woman lying down with ?SEDUCTRESS?. The tangs are stamped with the Double Dog Head Stamp. Even though this is a production knife, not many were made and it is hard to find.

Bulldog Brand Seductress Warncliff Whittler Knife SetBULLDOG SET OF SIX SEDUCTRESS MODEL KNIVES PROTOTYPES
This is the only set of the Seductress model "PROTOTYPE" knives with carbon steel blades. Six knives total, one each handled in Stag, Winterbottom, Buffalo Horn, Gold Lip Pearl, AAA1 Pearl, and Antique Elephant Ivory. This is the first and only Prototype release for the Seductress model which was released in 2003. The blade etch is the Double Dog Head etch. The tangs are stamped with the Double Dog Head Stamp. The reverse of each of the master blades is engraved with "Prototype". This set is a one of a kind. All knives come with a COA and the shipping invoice. Only set of it?s kind with Carbon Steel ever made!

Bulldog Brand Gold Lip Pearl Seductress KnifeGold Lip Pearl Seductress Production
This is a production Seductress with Gold Lip Pearl handles. The master blade etch is a woman lying down with "SEDUCTRESS". The tangs are stamped with the Double Dog Head Stamp. Even though this is a production knife, not many were made and it is hard to find.

Bulldog Brand Mastodon Ivory Seductress Whittler KnifeMastodon Ivory Seductress Production
This is a production Seductress with Interior Mastodon Ivory handles. The master blade etch is a woman lying down with ?SEDUCTRESS?. The tangs are stamped with the Double Dog Head Stamp. Even though this is a production knife, not many were made and it is hard to find.

Bulldog Brand Mastodon Ivory Seductress Whittler KnifeMastodon Ivory Seductress PROTOTYPE
This is the Interior Mastodon Ivory handled knife of the Seductress Prototype with Carbon Steel blades for the Seductress model which was released in 2003. The master blade etch is the Double Dog Head etch the reverse of the master blade is engraved with "Prototype". The tangs are stamped with the Double Dog Head Stamp. This knife has a COA.

Bulldog Brand Stag Thor Manchu Etch Whittler KnifeStag Thor Manchu Etch
From the Seller: This knife is 4 1/8" closed and features the nickel silver pinned Genuine Stag scales and the initials of my father, the late Jim Parker on the bolster. We found this knife in some of my dad's knives recently. We will provide a certificate to the winning bidder verifying this was one of the knives out of his knife collection. The master Wharncliff blade features the well liked famous trademarked Double Dogs head stamp and Hand Made. The rear side of the master Wharncliff blade is factory etched with "Manchu 9th Infantry Regiment WW I WW II Korea Vietnam Panama Keep Up The Fire". The rear tang of the master blade is stamped with Bulldog Brand Hammer Forged Solingen-Germany. This master Wharncliff blade features the reverse frosted Bulldog Brand with the Double Dogs head blade etching. This Genuine Stag Special Issue 9th Infantry Regiment Bulldog Brand Wharncliff Whittler is in mint condition. This knife came with a COA.

From the man who ordered these knives: This is a Bulldog 4 1/8 Thor model that was supposed to get a special reverse frosted etch, the Manchu etch. The factory screwed up the order and etched the backs as shown. These 25 knives were returned to Jim Parker and the reverse etch knives were made. Apparently Mr. Parker kept the incorrect knives as his own and this one has his initials on it. Once the knives were returned Mr. Parker was free to do with the rejects as he wished. The man who ordered these knives served in the 9th Infantry Regiment in Vietnam, Mr. Parker did not. The 9th Infantry Regiment (Manchu?s) is a highly decorated and proud Regiment that served the United States since 1855.