Customizing an AG Russell Cattaraugus that was made in Japan

The place to show off and discuss factory manufactured knives customized with scrimshaw, inlays, file work, etc...
Post Reply
User avatar
orvet
Gold Tier
Gold Tier
Posts: 19336
Joined: Tue May 16, 2006 6:23 am
Location: Willamette Valley, Oregon

Customizing an AG Russell Cattaraugus that was made in Japan

Post by orvet »

Randy sent me a knife that he wanted modified.
This is the original knife, an AG Russell Cattaraugus that was made in Japan.
Obviously not the original US Cattaraugus. This is the first time I have seen one of these knives. In fact before this I was not aware that anyone was reproducing the Cattaraugus brand. This is a well-made little knife, very similar to some of the Kershaws.
AG Russell Cattaraugus a before.jpg
This is the knife in pieces.
AG Russell Cattaraugus b apart.jpg
This is called a peening fail! I had to replace one handle, except when I got a new set of handles in the proper color from Culpepper, the dye lots were so different that I had to remove both handles and replace them.
AG Russell Cattaraugus c peening fail.jpg
He wanted a guitar shield on the new handles what I found is a sterling silver guitar charm for a charm bracelet. Note that the charm is not flat on the back, the body of the guitar is deeper into the bone than the rest of the shield. The neck was much higher and then the end of the guitar for you tune the strings was again deeper than the neck but not as deep as the body. It proved to be challenging when inlaying the shield because not only were you trying to inlay a shield, but also the shield in this case was three-dimensional with three different depths. I think it was one of the most challenging shields that I have ever inlaid!
AG Russell Cattaraugus d sterling silver shield.jpg
AG Russell Cattaraugus e sterling silver shield.jpg
This is the process of inlaying the shield. The knife is held in a Knife Makers Vise and it helps to keep the knife level, or in this case perpendicular to the Foredom in the drill press.
AG Russell Cattaraugus f work in progress.jpg
These last two pictures are the completed knife. I hope you enjoy the pictures of the process.
As always I welcome your comments.
AG Russell Cattaraugus g sterling silver shield.jpg
AG Russell Cattaraugus h.jpg
Dale
AAPK Administrator

Please visit my AAPK store: www.allaboutpocketknives.com/orvet

Job 13:15

"Buy more ammo!" - Johnnie Fain
“Evil is Powerless If The Good are Unafraid.” – Ronald Reagan
User avatar
New_Windsor_NY
Gold Tier
Gold Tier
Posts: 10827
Joined: Thu Nov 08, 2018 4:50 pm
Location: I'm On The Far Right On The Left Coast In Commiefornia

Re: Customizing an AG Russell Cattaraugus that was made in Japan

Post by New_Windsor_NY »

Very interesting, educational and just a joy to see. FANTASTIC job orvet! ::tu:: ::tu:: ::tu::
Kid: "Wish we had time to bury them fellas."
Josey Wales: "To hell with them fellas. Buzzards got to eat, same as worms."
Clint Eastwood-The Outlaw Josey Wales

Skip
User avatar
edge213
Gold Tier
Gold Tier
Posts: 7763
Joined: Sat Jan 25, 2014 12:48 am
Location: The Crossroads of America

Re: Customizing an AG Russell Cattaraugus that was made in Japan

Post by edge213 »

Great job Dale. That looks fanastic.
David
"Glowing like the metal on the edge of a knife" Meat Loaf
User avatar
Doc B
Posts: 3700
Joined: Fri Aug 10, 2018 10:57 pm
Location: San Antonio

Re: Customizing an AG Russell Cattaraugus that was made in Japan

Post by Doc B »

Very nice Dale! Randy, you've got a cool knife headed your way!!! ::tu:: ::tu:: ::tu::
Heretical Refurb / Mods of cheap old folders, since late 2018
doglegg
Gold Tier
Gold Tier
Posts: 17721
Joined: Mon Sep 18, 2017 2:35 am
Location: Grand Prairie, Texas

Re: Customizing an AG Russell Cattaraugus that was made in Japan

Post by doglegg »

Great work Dale, as always. ::tu:: ::tu::
User avatar
OLDE CUTLER
Gold Tier
Gold Tier
Posts: 4287
Joined: Wed Oct 11, 2017 8:11 pm
Location: South Dakota

Re: Customizing an AG Russell Cattaraugus that was made in Japan

Post by OLDE CUTLER »

::tu:: That really does look great. That shield really adds to the knife.
"Sometimes even the blind chicken finds corn"
KleenCut61
Posts: 806
Joined: Thu Mar 23, 2017 2:17 am
Location: Ulster Co, N.Y.
Contact:

Re: Customizing an AG Russell Cattaraugus that was made in Japan

Post by KleenCut61 »

Boo- ::tu:: Yah
User avatar
Steve Warden
Posts: 6320
Joined: Wed May 27, 2015 4:18 pm
Location: Cherry Hill, NJ

Re: Customizing an AG Russell Cattaraugus that was made in Japan

Post by Steve Warden »

D) All of the above
That is really cool! Love the inlay.
You do beautiful work, Dale.
Take care and God bless,

Steve
TSgt USAF, Retired
1980-2000

But any knife is better than no knife! ~ Mumbleypeg (aka Ken)
User avatar
orvet
Gold Tier
Gold Tier
Posts: 19336
Joined: Tue May 16, 2006 6:23 am
Location: Willamette Valley, Oregon

Re: Customizing an AG Russell Cattaraugus that was made in Japan

Post by orvet »

Thank you guys, you are all very kind!
Dale
AAPK Administrator

Please visit my AAPK store: www.allaboutpocketknives.com/orvet

Job 13:15

"Buy more ammo!" - Johnnie Fain
“Evil is Powerless If The Good are Unafraid.” – Ronald Reagan
Delmar Morgan
Posts: 143
Joined: Sat Nov 26, 2016 12:32 am

Re: Customizing an AG Russell Cattaraugus that was made in Japan

Post by Delmar Morgan »

I like it. ::tu::
User avatar
Quick Steel
Bronze Tier
Bronze Tier
Posts: 16953
Joined: Thu Dec 16, 2010 5:39 pm
Location: Lebanon, KY

Re: Customizing an AG Russell Cattaraugus that was made in Japan

Post by Quick Steel »

::groove:: ::groove:: ::groove::
User avatar
r redden
Posts: 237
Joined: Fri Feb 05, 2016 1:06 pm
Location: Asheville, N.C.

Re: Customizing an AG Russell Cattaraugus that was made in Japan

Post by r redden »

Can't wait to have it in hand Dale pictures look great. It's also good to have a new computer so I can get back on here.
User avatar
glennbad
Gold Tier
Gold Tier
Posts: 7353
Joined: Mon May 15, 2006 11:13 am
Location: NH

Re: Customizing an AG Russell Cattaraugus that was made in Japan

Post by glennbad »

Oh boy, what a beauty! Great work Dale!

As to the shield, couldn't you have hafted down the high spot in the backto make the whole thing one thickness?
User avatar
cudgee
Posts: 6185
Joined: Thu May 16, 2019 7:21 am
Location: Victoria. Australia.

Re: Customizing an AG Russell Cattaraugus that was made in Japan

Post by cudgee »

Fantastic skillful work, love the color of the new scales, a real craftsman's job.
User avatar
Colonel26
Bronze Tier
Bronze Tier
Posts: 10322
Joined: Sun Jul 01, 2012 3:35 am
Location: Kentucky

Re: Customizing an AG Russell Cattaraugus that was made in Japan

Post by Colonel26 »

That’s a fine looking knife right there. Excellent and inivative work there Dale!
“There are things in the old Book which I may not be able to explain, but I fully accept it as the infallible word of God, and receive its teachings as inspired by the Holy Spirit.”
Robert E. Lee
hardman
Gold Tier
Gold Tier
Posts: 468
Joined: Mon Jan 18, 2016 5:15 pm

Re: Customizing an AG Russell Cattaraugus that was made in Japan

Post by hardman »

Super looking result and a great job to get it there. Thanks for sharing that.
Gary

"Now it cuts like a knife, but it feels so right." Bryan Adams
User avatar
Dinadan
Silver Tier
Silver Tier
Posts: 2994
Joined: Sat Dec 29, 2012 2:34 am
Location: Coastal Alabama

Re: Customizing an AG Russell Cattaraugus that was made in Japan

Post by Dinadan »

Beautiful work, Dale! It looks like it could be a bit stressful doing the shield since everything else is pretty much perfect at that point.
Mel
User avatar
r redden
Posts: 237
Joined: Fri Feb 05, 2016 1:06 pm
Location: Asheville, N.C.

Re: Customizing an AG Russell Cattaraugus that was made in Japan

Post by r redden »

I received the knife today Dale and all I can say is WOW!! Your pictures look good but just don't show how nice it is in hand. I've played guitar over 50 years and really wanted a knife with a guitar shield. So thanks again Dale for a beautiful job.
Post Reply

Return to “Customized Factory Knives”