It's In The Mail

[TPK]

It is rather interesting with the ornate brass handles. Appears to use the same razor-type blade as the others, but I'm not sure.

Tell us more about it when you get it ok.

Tom, they showed up today. It appears to be a basic cigar cutter. Ornate handles, brass all around (including blade). I'm putting my post together for the Mail Call thread as I type this.

Looks good Cody! Thanks for the picture!

[TPK]

Used the S.H. sale today. The Zippo is on back order though, so it will be a while till it gets shipped to my mom's. And then mom will take a while to send them over to me. So here they are for a sneak preview. Could be 3-4 months until I finally get them but that's ok. I'll wait.

Thanks for looking friends!

[Papa Bones]

Used the S.H. sale today. The Zippo is on back order though, so it will be a while till it gets shipped to my mom's. And then mom will take a while to send them over to me. So here they are for a sneak preview. Could be 3-4 months until I finally get them but that's ok. I'll wait.

Thanks for looking friends!

Looking good Tom. Nice looking 6208 whittler in blue bone.

[TPK]

Used the S.H. sale today. The Zippo is on back order though, so it will be a while till it gets shipped to my mom's. And then mom will take a while to send them over to me. So here they are for a sneak preview. Could be 3-4 months until I finally get them but that's ok. I'll wait.

Thanks for looking friends!

Looking good Tom. Nice looking 6208 whittler in blue bone.

Thanks Smitty! I really like the shield. Reminds me of a Chevy.
It was marked down to $ 37 today. Normally cost $ 49 or so.
Thought I would take advantage of the moment.

[cody6268]

Used the S.H. sale today. The Zippo is on back order though, so it will be a while till it gets shipped to my mom's. And then mom will take a while to send them over to me. So here they are for a sneak preview. Could be 3-4 months until I finally get them but that's ok. I'll wait.

Thanks for looking friends!

Great scores!

I really need to start picking up a few of the more interesting Zippos. All I have is a Street Chrome, and I've never even filled it. That one with the Mountain Lion looks great!


The Half Whittler and Mini Copperhead I've both been eyeing to replace some really old penknives and a Wharncliffe pattern in EDC. Case is taking a page from the Moore Makers they are now producing, and now have a small lineup of white bone/CV knives. The Half Whittler is among those, while so far, there has not seem to have been a CV Wharncliffe Mini Copperhead. I may get one.

[Dan In MI]

Used the S.H. sale today.

Both knife and lighter are nice. I bet you're chomping at the bit waiting for them to arrive!

[jerryd6818]

Used the S.H. sale today.

Both knife and lighter are nice. I bet you're chomping at the bit waiting for them to arrive!

Tom, I couldn't do it. The waiting would drive me nutty (or nuttier).

[QTCut5]

Could be 3-4 months until I finally get them but that's ok. I'll wait.

Tom, you must have the patience of Job!

I can barely remember what knives I ordered a week ago. And if they take more than a week to arrive, OCD Monkey throws a royal simian tantrum.

[TPK]

Could be 3-4 months until I finally get them but that's ok. I'll wait.

Tom, you must have the patience of Job!

I can barely remember what knives I ordered a week ago. And if they take more than a week to arrive, OCD Monkey throws a royal simian tantrum.

Used the S.H. sale today.

Both knife and lighter are nice. I bet you're chomping at the bit waiting for them to arrive!

Tom, I couldn't do it. The waiting would drive me nutty (or nuttier).

LOL! Jerry & Q! I know exactly how you feel! I think the good Lord is teaching me the lesson of "patience". It's a hard lesson because I'm a slow learner though. I'm just Happy & Thankful that my mom is still around to help me feed my knife addiction.

Did I just say the "A" word?!?

[TPK]

Used the S.H. sale today.

Both knife and lighter are nice. I bet you're chomping at the bit waiting for them to arrive!

Used the S.H. sale today. The Zippo is on back order though, so it will be a while till it gets shipped to my mom's. And then mom will take a while to send them over to me. So here they are for a sneak preview. Could be 3-4 months until I finally get them but that's ok. I'll wait.

Thanks for looking friends!

Great scores!

I really need to start picking up a few of the more interesting Zippos. All I have is a Street Chrome, and I've never even filled it. That one with the Mountain Lion looks great!

The Half Whittler and Mini Copperhead I've both been eyeing to replace some really old penknives and a Wharncliffe pattern in EDC. Case is taking a page from the Moore Makers they are now producing, and now have a small lineup of white bone/CV knives. The Half Whittler is among those, while so far, there has not seem to have been a CV Wharncliffe Mini Copperhead. I may get one.

Thanks for the comments gentlemen!

@Dan:

The bit is too hard,
My teeth are soon gone,
They shouldn't make me,
Wait so long!


@Cody: Yes Sir, them Case Zippos are pretty! You should check out what they have over there at S.H. at the moment. Some real beauties! Turkey, Trout, Deer, Mountain Lion, Eagle ect. ect.

I see it this way, I believe that they will hold up in value good enough that I could always get my money back out of them if I ever wanted to. Which I don't think I ever will but who knows. And..., When I order something under $50 and have to pay the $6 shipping fee I always look at the S.H. "accessoires" to see what I can add to my cart to get over the $50 so that I can save the $6 shipping fee. Sometimes it's just a couple of pins & sometimes it's a Zippo. So if you subtract $6 from the price of the Zippos, then they are really a good deal!!! And..., it also supports the mother company of Case. And..., it also encourages Zippo to make even more beautiful Case Zippos. All these points are just in my opinion of course.

Oh, almost forgot one. And..., they really do look beautiful in a showcase along with Case knives! A "MUST" in my showcase anyways! Plus they are a conversation piece in the showcase as well and you can explain the connection between Zippo, Case & Bradford, PA.

[TPK]

I know this is the wronge thread but, I took a few pictures real quick to show Y'all how pretty Case Zippos look together with Case knives. IMHO, I don't think you have to be a smoker to enjoy their looks, especially due to there ties to Case Cutlery. If you enlarge the 4th picture up from the bottom, you can even read the words Badford, PA on one of the Zippos. They just look with Case knives IMO. First picture of my showcase is a bit too dark. Last few pictures are my only 4 Case EDC's. The rest of my Case knives & the two Zippos with knife pictures on them are in my little showcase. Hope you all enjoy the pictures.

My conclusion is..., "Support Case Cutlery, Buy More Zippos!"

[toomanyknives]

What a great batch of goodies, Tom!

[TPK]

What a great batch of goodies, Tom!

Thanks Buddy!

[Dan In MI]

Tom, that's a great group of knives...and lighters. That green Canoe is something else!

[TPK]

Tom, that's a great group of knives...and lighters. That green Canoe is something else!

Thanks Dan! Appreciate your comment my friend!

[TPK]

Fathers Day in Germany is on May 13th this year. My wife let me pick out a knife for the occasion.
She's a great wife!

Anyways, had my eyes on this one for a while so I picked out this RR Premium Select Stockman. The handles are made with Buffalo Horn, Black Pearl, Abalone & Nickle Silver Spacers. Back springs are with file work. Can't wait to see it.

Thanks for looking friends!

[jerryd6818]

Fathers Day in Germany is on May 13th this year. My wife let me pick out a knife for the occasion.
She's a great wife!

Anyways, had my eyes on this one for a while so I picked out this RR Premium Select Stockman. The handles are made with Buffalo Horn, Black Pearl, Abalone & Nickle Silver Spacers. Back springs are with file work. Can't wait to see it.

Thanks for looking friends!

Oh. I have one of those in the Mini-Trapper pattern. You're going to like it. Very classy.

[cody6268]

Stanley USA Yankee Handyman 133H push-drill and an assortment of fluted drill bits and slotted bits. $28. I figure this will be good for precise and tight jobs, as well as a decent driver. The problem is that Phillips bits for these are incredibly expensive--like $10-15 at least. A guy sells $30 adapters that allows one to use common 1/4 drive bits with these, and that's what I'm gonna go with.

[toomanyknives]

Fathers Day in Germany is on May 13th this year. My wife let me pick out a knife for the occasion.
She's a great wife!

Anyways, had my eyes on this one for a while so I picked out this RR Premium Select Stockman. The handles are made with Buffalo Horn, Black Pearl, Abalone & Nickle Silver Spacers. Back springs are with file work. Can't wait to see it.

Thanks for looking friends!

Man, that's a slick one, Tom! I have a few Buffalo Horn Case knives, and man are they proud of them! I think you'll really like that one!

[TPK]

Stanley USA Yankee Handyman 133H push-drill and an assortment of fluted drill bits and slotted bits. $28. I figure this will be good for precise and tight jobs, as well as a decent driver. The problem is that Phillips bits for these are incredibly expensive--like $10-15 at least. A guy sells $30 adapters that allows one to use common 1/4 drive bits with these, and that's what I'm gonna go with.

Cool find Cody!

Buy yourself a $5 bit holder for normal bits and grind it to fit inside the Stanly.
A guy at work did that for a multitoll he has. I think it was a Leatherman. May not be an easy task but it is possible. Of course I'm lazy, I'd buy the adapter for $30.

[TPK]

Fathers Day in Germany...,

Oh. I have one of those in the Mini-Trapper pattern. You're going to like it. Very classy.

This was the only one of them I have seen over here & it's been up for sale for a while. Hope your right about it Jerry. If I'm not Happy with it, I'll be done with RR.

[TPK]

Fathers Day in Germany...,

Man, that's a slick one, Tom! I have a few Buffalo Horn Case knives, and man are they proud of them! I think you'll really like that one!

Thank ya Sir!
I like knives with horn handles. Looking forward to checking out the F&F. It sure looks nice on the two pictures the seller posted. It was under $30 so I could even EDC it without having a bad conscience about it.

[bladebuddy]

Stanley USA Yankee Handyman 133H push-drill and an assortment of fluted drill bits and slotted bits. $28. I figure this will be good for precise and tight jobs, as well as a decent driver. The problem is that Phillips bits for these are incredibly expensive--like $10-15 at least. A guy sells $30 adapters that allows one to use common 1/4 drive bits with these, and that's what I'm gonna go with.



s-l1600YKRAC.jpg

Cody, congrats on finding your Yankee driver. My dad had one in his toolbox. It’s the original cordless screwdriver

[toomanyknives]

Fathers Day in Germany...,

Man, that's a slick one, Tom! I have a few Buffalo Horn Case knives, and man are they proud of them! I think you'll really like that one!

Thank ya Sir!
I like knives with horn handles. Looking forward to checking out the F&F. It sure looks nice on the two pictures the seller posted. It was under $30 so I could even EDC it without having a bad conscience about it.

Under $30? Amazing!

[TPK]

Man, that's a slick one, Tom! I have a few Buffalo Horn Case knives, and man are they proud of them! I think you'll really like that one!

Thank ya Sir!
I like knives with horn handles. Looking forward to checking out the F&F. It sure looks nice on the two pictures the seller posted. It was under $30 so I could even EDC it without having a bad conscience about it.

Under $30? Amazing!

24,04€ or $25,97 shipped. Good price?