Beautiful Case fixed blade with epic stag handles....but the blade has pitting like it was hit by acid or something. No rust.
If you grind or sand it down you'll have a paper thin knife...
Pitted so bad, not rusty? What to do?
- TripleF
- Bronze Tier
- Posts: 18527
- Joined: Mon Feb 14, 2011 3:42 pm
- Location: West Central FL
- Contact:
Pitted so bad, not rusty? What to do?
SCOTT
HOME OF THE BRAVE! (not the scarety cats)
Colonial Knife Company History ebook:
https://gumroad.com/l/ZLDb
HOME OF THE BRAVE! (not the scarety cats)
Colonial Knife Company History ebook:
https://gumroad.com/l/ZLDb
Re: Pitted so bad, not rusty? What to do?
Hey Scott, your TV show is called "Use It or List It" isn't it. I bet the boys would be proud to cut something with it. List it as RARE. and somebody will buy it.
- 1967redrider
- Gold Tier
- Posts: 16217
- Joined: Wed Feb 02, 2011 4:23 pm
- Location: Alexandria, VA
- Contact:
Re: Pitted so bad, not rusty? What to do?
I say use it and enjoy the pretty stag handle.
Could you make a filet knife out of it?
Could you make a filet knife out of it?
Pocket, fixed, machete, axe, it's all good!
You're going to look awfully silly with that knife sticking out of your @#$. -Clint Eastwood, High Plains Drifter
You're going to look awfully silly with that knife sticking out of your @#$. -Clint Eastwood, High Plains Drifter
Re: Pitted so bad, not rusty? What to do?
Scott, Nice stag but it is what it is. I have reground some old pocket knife blades to get rid of pits but then that's what you end up with, a thin blade and probably ground off most of the stampings on the tang. So I would just oil her up and use it and think about all the stories she could tell. And to do it right you would have to completely take it apart, and old stag is really hard to remove without cracking it. Terry
If it ain't broke, don't fix it!
Re: Pitted so bad, not rusty? What to do?
The Knife has character.! Although not perfect, it looks good for
everything it has been through.
Bob
everything it has been through.
Bob
- TripleF
- Bronze Tier
- Posts: 18527
- Joined: Mon Feb 14, 2011 3:42 pm
- Location: West Central FL
- Contact:
Re: Pitted so bad, not rusty? What to do?
Tried sharpening....to no avail....at least not tomy liking and effort...
Heading to the LIST IT for sale!!
Heading to the LIST IT for sale!!
SCOTT
HOME OF THE BRAVE! (not the scarety cats)
Colonial Knife Company History ebook:
https://gumroad.com/l/ZLDb
HOME OF THE BRAVE! (not the scarety cats)
Colonial Knife Company History ebook:
https://gumroad.com/l/ZLDb
-
- Posts: 13373
- Joined: Mon Jan 11, 2016 5:36 pm
- Location: West Kootenays, B.C.
Re: Pitted so bad, not rusty? What to do?
I think it has already been buffed to remove the more superficial rust and these pits on a thinner blade is what you have now. Plus enough blade loss so that it is too thick just above the 'edge' and a lot of sharpening would be need to create a working edge. Could be a boy's 'hack around' knife. Most kids would be thrilled to have it and hack at vines, etc.
kj
kj
Re: Pitted so bad, not rusty? What to do?
I think joe is spot on. It was very rusty and cleaned.
I’d try to reshape and thin the blade a little and squeeze the last bit of life out of it. The stag is epic and worth the effort IMHO.
I’d try to reshape and thin the blade a little and squeeze the last bit of life out of it. The stag is epic and worth the effort IMHO.