Turning Horn To Handles

This forum is for posting step by step techniques used in the art of making, customizing, and repairing knives. Please stop by and teach a few things or maybe learn something new from the talented members of AAPK.
Post Reply
User avatar
muskrat man
Gold Tier
Gold Tier
Posts: 5667
Joined: Fri Jun 30, 2006 4:04 am
Location: Ohio
Contact:

Turning Horn To Handles

Post by muskrat man »

I put this little tutorial together to show you how to process horns for use as knife handles. This applies for any American horned animal like cow and buffalo. Also, to avoid any confusion Elk, deer, and moose do not have horns, they have ANTLERS. Antlered animals shed their headgear, horned animals (with the exception of antelope) do not.

We start off with an ordinary cow horn
Image

Mark it where it the tip starts getting solid
Image

and cut it off
Image

Now I make a rough mark and slice the horn in two. Always keep the cut parallel to the curve of the horn so if the horn is twisted you need to follow the curve of the horn, don't just make a straight cut or you'll lose material
Image

Here it is sliced right down the middle
Image

At about the halfway point is where the thickness begins to noticeably change, I'll get one thick set and one thinner set out of this relatively small horn plus I'll have the tip for another project.
Image

Here is everything
Image

decent thickness once you get in off the very edge
Image

Chuck them all in boiling water, it doesn't stink too bad so you can do it inside if the wife will be gone for the day. I don't have that problem so I just boil them right in the kitchen. You could do it outside or in an outbuilding on a propane stove, turkey burner, ect. The hotplates I tried don't get hot enough to actually boil the water, the horn simmered for 5 hrs and was still too hard to clamp.
Image

On a good rolling boil for around an hour for the thinner pieces, 1.5-2 hr for the thicker pieces ( 3/16" thick) to get them soft enough to clamp flat.


You can clamp them many ways but the best way I found by far was to use two flat pieces of wood (or metal, micarta ect as long as they're flat) and sandwich the horn between them and clamp them in a vice. This gives you the leverage and power you need to make the pieces good and flat.
Image

You should leave them clamped for a few hours to ensure they are fully dry and cool so they do not return to their previous curved state after removing them from the clamps.Nevertheless they will still need surface sanding to make them flat enough to install on a pocket knife.

Image
Image


I will update this in a day or two with a photo of the completed product installed on a knife.
Custom knives, repair, restoration & embellishment
Certified Hubertus, Taylor, & Schrade repairman past and present
http://www.muskratmanknives.com
https://www.facebook.com/Muskratmanknives
User avatar
tjmurphy
Posts: 11129
Joined: Fri Sep 11, 2009 12:41 pm
Location: South of Cincinnati

Re: Turning Horn To Handles

Post by tjmurphy »

This is pretty cool MM ::tu::
"There are none so blind as those that refuse to see"

God Bless America - Though I don't know why he would want to.
User avatar
Joe Dirt
Posts: 1747
Joined: Tue Mar 16, 2010 4:10 pm
Location: N.C. USA

Re: Turning Horn To Handles

Post by Joe Dirt »

Great, MM! ::tu::
A lot simpler than the other articles had implied.

(good to know this doesn't end in divorce... maybe just extra chores. :lol: )

........ Joe
I've got a camouflage knife, but I can't find it.......

..... cardboard addicted.....

"The old timer's concentrated on making knives; not keeping records!!" ~ Bonfire bob
User avatar
whitebuffalo58
Posts: 2743
Joined: Tue Aug 17, 2010 2:35 am
Location: SW MO Heart of the Ozarks

Re: Turning Horn To Handles

Post by whitebuffalo58 »

Excellent tutorial, MM! Can't wait to see the knife. I'm gonna hafta try a couple myself now. ::tu::

Thanks, WB
User avatar
singin46
Posts: 8126
Joined: Thu Feb 08, 2007 6:57 am
Location: MUSIC CITY

Re: Turning Horn To Handles

Post by singin46 »

Great tutorial Kaleb! Never knew it was that easy.
Love all Jacks
User avatar
Tucool
Posts: 141
Joined: Fri Sep 30, 2011 3:44 am
Location: Western Australia

Re: Turning Horn To Handles

Post by Tucool »

I was just thinking about how do this myself the other day ::nod::

Thanks very much for the tutorial ::tu::


Brett.
Brett.

West Aussie Case Collector.
User avatar
muskrat man
Gold Tier
Gold Tier
Posts: 5667
Joined: Fri Jun 30, 2006 4:04 am
Location: Ohio
Contact:

Re: Turning Horn To Handles

Post by muskrat man »

Just noticed my "day or two" was up so I cobbled together this Boker whittler real quick with the horn, once it gets thin it is translucent so it would be a good idea to give the backside a shot of white spray paint before gluing it up. That way you can't see to the liner once it's polished. Darker horn would not have this problem.
Image
Image
Custom knives, repair, restoration & embellishment
Certified Hubertus, Taylor, & Schrade repairman past and present
http://www.muskratmanknives.com
https://www.facebook.com/Muskratmanknives
User avatar
singin46
Posts: 8126
Joined: Thu Feb 08, 2007 6:57 am
Location: MUSIC CITY

Re: Turning Horn To Handles

Post by singin46 »

Looks like an old classic now Kaleb! ::tu:: ::tu::
Love all Jacks
User avatar
tjmurphy
Posts: 11129
Joined: Fri Sep 11, 2009 12:41 pm
Location: South of Cincinnati

Re: Turning Horn To Handles

Post by tjmurphy »

That old cow horn looks pretty nice ::tu:: ::tu::
"There are none so blind as those that refuse to see"

God Bless America - Though I don't know why he would want to.
User avatar
whitebuffalo58
Posts: 2743
Joined: Tue Aug 17, 2010 2:35 am
Location: SW MO Heart of the Ozarks

Re: Turning Horn To Handles

Post by whitebuffalo58 »

Here's an old Kutmaster I did after reading the tutorial. It was a big help! Thanks again, Kaleb!
SANY0002.JPG
SANY0004.JPG
I kinda messed up, the colorful slab was supposed to end up on front! ::dang::

WB
Post Reply

Return to “Knife Related Tutorials”