Some steps to replacing handles on a slipjoint

This forum is for posting step by step techniques used in the art of making, customizing, and repairing knives. Please stop by and teach a few things or maybe learn something new from the talented members of AAPK.
User avatar
agteacher2
Posts: 402
Joined: Sat May 28, 2005 1:04 am
Location: Athens, TX

Some steps to replacing handles on a slipjoint

Post by agteacher2 »

Here are a few photos of a job I recently completed. I removed the Birdseye handles and replaced them with pinless Bois' D Arc. The pix just show the steps. I hope you enjoy them.
Jeff

1. The original and the rough wood for the handles.
Image

2. With the original handles removed

Image

3 and 4. Next I brad the center pin and file down smooth.
Image
Image

5 and 6. Marking the new handles and cutting to rough shape.
Image
Image

7. (skipped a few steps) after the handles are installed and rough sanded
Image

8 and 9. After final sanding.
Image
Image

10. After sealer, some dry time and a first buffing

Image

11. Finished product

Image
Image
Jeff Jones
Athens, TX

www.Jonescutlery.com
User avatar
muskrat man
Gold Tier
Gold Tier
Posts: 5667
Joined: Fri Jun 30, 2006 4:04 am
Location: Ohio
Contact:

Post by muskrat man »

Now THAT is what a Texas toothpick should look like. That sealer really puts a shine on that osage! I may move this to the tutorial section if you don't mind. ::tu:: Hey, how fine of a grit do you take your handles down to before applying a finish? I usually go down to 600 then give it a good runover with 000 steel wool.
Custom knives, repair, restoration & embellishment
Certified Hubertus, Taylor, & Schrade repairman past and present
http://www.muskratmanknives.com
https://www.facebook.com/Muskratmanknives
User avatar
agteacher2
Posts: 402
Joined: Sat May 28, 2005 1:04 am
Location: Athens, TX

Post by agteacher2 »

Move Away
Jeff Jones
Athens, TX

www.Jonescutlery.com
User avatar
sunburst
Posts: 2921
Joined: Wed Nov 23, 2005 10:07 pm
Location: The Scrublands of Central Florida

Post by sunburst »

Hey Jeff very nice tutorial/exhibit of your work, it sure is fun to watch you guys do this and very much appreciated that ya"ll think enough of us to take the time to share with us.. ::tu::

Sunburst
“The farmer is the only man in our economy who buys everything at retail, sells everything at wholesale, and pays the freight both ways”
User avatar
agteacher2
Posts: 402
Joined: Sat May 28, 2005 1:04 am
Location: Athens, TX

Post by agteacher2 »

Thanks Sunburst,

If I had a photographer to stand by and take the pictures of each step it would be a better turorial. I get going and forget about the camera. ::shrug::

Glad you enjoyed it!!!
Jeff
Jeff Jones
Athens, TX

www.Jonescutlery.com
User avatar
singin46
Posts: 8126
Joined: Thu Feb 08, 2007 6:57 am
Location: MUSIC CITY

Post by singin46 »

Thanks for the showing Jeff, really makes that Queen pop don't it. And this particular wood, Bois D arc is like rock. Can hardly drive a nail in it.


Singin46 ::tu::
Love all Jacks
User avatar
agteacher2
Posts: 402
Joined: Sat May 28, 2005 1:04 am
Location: Athens, TX

Post by agteacher2 »

You are absolutely correct Singin46. This piece threw the belt off my band saw three times trying to split it. ::dang::
Jeff Jones
Athens, TX

www.Jonescutlery.com
User avatar
orvet
Gold Tier
Gold Tier
Posts: 19336
Joined: Tue May 16, 2006 6:23 am
Location: Willamette Valley, Oregon

Post by orvet »

Great tutorial Jeff & an excellent finished product.

Question for you: What do you have covering the bolsters when you were at the sanding stage?

I am always looking for something better to cover the bolsters with while sanding. I have used several different types of tape. I am wondering what you are using there in your pics?

Very nice work! ::tu::
Dale
Dale
AAPK Administrator

Please visit my AAPK store: www.allaboutpocketknives.com/orvet

Job 13:15

"Buy more ammo!" - Johnnie Fain
“Evil is Powerless If The Good are Unafraid.” – Ronald Reagan
User avatar
agteacher2
Posts: 402
Joined: Sat May 28, 2005 1:04 am
Location: Athens, TX

Post by agteacher2 »

Dale,

I'm real high tech. :lol: It is a piece of 2 inch masking tape about three layers deep. I leave it wide just to make it easier to hold on to.
Jeff Jones
Athens, TX

www.Jonescutlery.com
Hukk
Posts: 4546
Joined: Mon Mar 06, 2006 4:04 am

Post by Hukk »

There's been times where I use duct tape also, usually on the blade edge. Only problem (minor) is that it usually leaves adhesive on the blade, but it is easy to remove.

Thanks for the tutorial Jeff, another good one and a good knife to boot. Doesn't get any better than that. ::tu::
Hukk
User avatar
orvet
Gold Tier
Gold Tier
Posts: 19336
Joined: Tue May 16, 2006 6:23 am
Location: Willamette Valley, Oregon

Post by orvet »

I have used all kind of tapes. I am always trying to find something I can cover the wood with when I buff the bolsters & something to cover the bolsters when I sand the wood.

It has to be tough enough that you don't sand or buff through it.

I thought maybe you had found the Holy Grail of bolster tape! :lol:

Dale
Dale
AAPK Administrator

Please visit my AAPK store: www.allaboutpocketknives.com/orvet

Job 13:15

"Buy more ammo!" - Johnnie Fain
“Evil is Powerless If The Good are Unafraid.” – Ronald Reagan
User avatar
jonet143
Gold Tier
Gold Tier
Posts: 6922
Joined: Fri Jun 23, 2006 3:33 am
Location: w'ford-tejas

Post by jonet143 »

dale, i use some aluminum duct? tape on the bolsters while i'm working the handles. it's as thin or thinner than masking tape but won't burn off. i'll see if it has any identification.

great post jeff, that bodark sure looks good. i like the tip of using extra tape to hold on to.
johnnie f 1949

on the cutting edge is sometimes not the place to be.
please support our troops - past and present
if not a member...join the NKCA! they're on our side.
User avatar
orvet
Gold Tier
Gold Tier
Posts: 19336
Joined: Tue May 16, 2006 6:23 am
Location: Willamette Valley, Oregon

Post by orvet »

jonet143 wrote:i like the tip of using extra tape to hold on to.
Yes, that is a great idea. I will have to try it! ::tu:: ::tu::

Dale
Dale
AAPK Administrator

Please visit my AAPK store: www.allaboutpocketknives.com/orvet

Job 13:15

"Buy more ammo!" - Johnnie Fain
“Evil is Powerless If The Good are Unafraid.” – Ronald Reagan
User avatar
dewman
Posts: 409
Joined: Wed Jan 24, 2007 2:29 am
Location: Central Idaho

If I may ask a question....

Post by dewman »

....if a person wanted pins showing in the final finished product, would I be correct in assuming the entire knife would have to be disassembled and new pins brazed in place, reassembled then the re-handling process continuned? Just curious.

Beautiful job by the way. Thanks for the show and tell.

Dewman
"This ain't Dodge City....and you ain't Bill Hickock!"
User avatar
muskrat man
Gold Tier
Gold Tier
Posts: 5667
Joined: Fri Jun 30, 2006 4:04 am
Location: Ohio
Contact:

Post by muskrat man »

it isn'tt mandatory to disassemble the whole knife to show pins, but to be done properly it helps, so you can peen them into place to actually help hold everything together.
Custom knives, repair, restoration & embellishment
Certified Hubertus, Taylor, & Schrade repairman past and present
http://www.muskratmanknives.com
https://www.facebook.com/Muskratmanknives
User avatar
orvet
Gold Tier
Gold Tier
Posts: 19336
Joined: Tue May 16, 2006 6:23 am
Location: Willamette Valley, Oregon

Post by orvet »

Kaleb is right, they are peened & that is much easier to do if the knife is disassembled.
I have never seen braised pins. That would probably heat the handle material too hot and burn it.

I am working on a tutorial for you. Taking pics of my grandsons as they work. It is much easier to take pics if you aren't trying to do the work & take the pics both at the same time.

Dale
Dale
AAPK Administrator

Please visit my AAPK store: www.allaboutpocketknives.com/orvet

Job 13:15

"Buy more ammo!" - Johnnie Fain
“Evil is Powerless If The Good are Unafraid.” – Ronald Reagan
User avatar
muskrat man
Gold Tier
Gold Tier
Posts: 5667
Joined: Fri Jun 30, 2006 4:04 am
Location: Ohio
Contact:

Post by muskrat man »

orvet wrote:. Taking pics of my grandsons as they work. It is much easier to take pics if you aren't trying to do the work & take the pics both at the same time.

Dale
Ain't that the truth!
Custom knives, repair, restoration & embellishment
Certified Hubertus, Taylor, & Schrade repairman past and present
http://www.muskratmanknives.com
https://www.facebook.com/Muskratmanknives
User avatar
dewman
Posts: 409
Joined: Wed Jan 24, 2007 2:29 am
Location: Central Idaho

I'm looking forward to it.

Post by dewman »

orvet wrote:Kaleb is right, they are peened & that is much easier to do if the knife is disassembled.
I have never seen braised pins. That would probably heat the handle material too hot and burn it.

I am working on a tutorial for you. Taking pics of my grandsons as they work. It is much easier to take pics if you aren't trying to do the work & take the pics both at the same time.

Dale
I'm looking forward to it. I have two Camillus electricians knives at the ready, hoping to make them into a one blader. The ones I've seen on the forum really caught my eye. I have some nice ambonia wood I plan to use for the scales. If the first one goes as planned, I also have some fiddleback maple I'll use on the other.

Pictured is the ambonia. Nice stuff to work with. About the same hardness as walnut. It has a unique feature of sort of an irridescense (sp?) when you turn it on a different plane with sunlight on it.
Attachments
ambonia.jpg
"This ain't Dodge City....and you ain't Bill Hickock!"
User avatar
orvet
Gold Tier
Gold Tier
Posts: 19336
Joined: Tue May 16, 2006 6:23 am
Location: Willamette Valley, Oregon

Post by orvet »

Nice wood ::tu::
You should see the Amboyna Burl, absolutely amazing.
Yesterday I found a new source for wood locally. I won some Koa on ebay and saw it was local. I made arrangements for local pickup. It turns out that I used to work with the guy about 10 years ago. (It's a small world, but I would hate to paint it) :mrgreen: He has some of the finest burl I have seen & a number of woods I have not heard of before.

Here is a pic of the wood I got yesterday:
The large piece on the left is stabilized Buckeye Burl, Koa on top left, Red Mallee in left center & Sepele on the bottom left.
Does anyone need a knife re-handled? :lol:

Dale
Attachments
Buckeye & Koa.jpg
Dale
AAPK Administrator

Please visit my AAPK store: www.allaboutpocketknives.com/orvet

Job 13:15

"Buy more ammo!" - Johnnie Fain
“Evil is Powerless If The Good are Unafraid.” – Ronald Reagan
Hukk
Posts: 4546
Joined: Mon Mar 06, 2006 4:04 am

Post by Hukk »

Would that place be in Klamath Falls? I was drooling through a warehouse over there last summer. Fantastic selection and nothing like picking out your own wood. I have a piece of KOA (5A EXTRA CURLY XF lumber) coming from Klamath Falls also, along with some very nicely striped Brazilian Tulipwood.

Real nice haul Dale! ::drool:: Makes me want to be up around those exotic wood warehouses. ::tu::

P.S. That sure is a great looking piece of Buckeye, indeed one of my top 5 favorites! ::drool:: ::tu:: ::tu::
Attachments
KOA.jpg
KOA.jpg (5.86 KiB) Viewed 16878 times
Hukk
User avatar
orvet
Gold Tier
Gold Tier
Posts: 19336
Joined: Tue May 16, 2006 6:23 am
Location: Willamette Valley, Oregon

Post by orvet »

Nice Hukk. ::tu:: ::drool::
This guy has a lot of instrument grade wood & exhibition grade too as he gets it in. I saw a piece of Koa that would make a guitar back.....Knock your socks off.

Dale
Dale
AAPK Administrator

Please visit my AAPK store: www.allaboutpocketknives.com/orvet

Job 13:15

"Buy more ammo!" - Johnnie Fain
“Evil is Powerless If The Good are Unafraid.” – Ronald Reagan
Edgewise
Posts: 809
Joined: Fri Jun 01, 2007 3:34 pm

Post by Edgewise »

muskrat man wrote:it isn'tt mandatory to disassemble the whole knife to show pins, but to be done properly it helps, ...
Is that why the pins were not replaced?
Does this mean that, with modern hi-tech epoxy, pins are not necessary?
Or does the beauty of the scales determine whether pins are put or not?

Thanks for the insider look, agteacher2. For me, it's like a mystery being revealed. You really brought out a glow in that bois d'arc.
revencer
Posts: 56
Joined: Sun Feb 17, 2008 1:53 am

do you

Post by revencer »

do you sand the wood all the way down to the grips shape or do you cut them down to an outline then sand? If so what do you cut?
User avatar
orvet
Gold Tier
Gold Tier
Posts: 19336
Joined: Tue May 16, 2006 6:23 am
Location: Willamette Valley, Oregon

Re: do you

Post by orvet »

revencer wrote:do you sand the wood all the way down to the grips shape or do you cut them down to an outline then sand? If so what do you cut?
For me, it all depends on the knife and the handles that were on it. If I am replacing the wood handles of a Schrade LB-7 I will use wood the same thickness as the bolsters, just like on the original.
If I am doing a Stockman, I will leave the wood a bit thicker in the middle and taper it down to meet the bolsters.

I usually use the old handles as a pattern to make the new handles. Of course you have to fit the length precisely to the bolsters, but I will usually leave it wider on the sides and sand it down to fit the liner after I have glued it on.

I hope this helps,
Dale
Dale
AAPK Administrator

Please visit my AAPK store: www.allaboutpocketknives.com/orvet

Job 13:15

"Buy more ammo!" - Johnnie Fain
“Evil is Powerless If The Good are Unafraid.” – Ronald Reagan
vikingfisher
Posts: 49
Joined: Thu Sep 18, 2008 5:18 pm

Re: Some steps to replacing handles on a slipjoint

Post by vikingfisher »

xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Post Reply

Return to “Knife Related Tutorials”