Page 2 of 2

Re: Restored HEAVY DUTY RUST on Ulster Knife Co Scout

Posted: Sun Jan 03, 2016 12:20 am
by glennbad
really nice job!

Re: Restored HEAVY DUTY RUST on Ulster Knife Co Scout

Posted: Mon Jan 04, 2016 8:30 am
by TripleF
Thanks Glenn! ::handshake::

Re: Restored HEAVY DUTY RUST on Ulster Knife Co Scout

Posted: Mon Jan 04, 2016 2:31 pm
by rea1eye
I have used mineral oil to both lubricate the joint and help restore a dull surface

on the scale. I have never soaked with mineral oil. I apply a thin coat on the

scale overnight and wipe off in the AM.

When buying mineral oil get the fragrance free variety. No need to expose the knife

to additional chemicals which might react with the blade/scale

Bob

Re: Restored HEAVY DUTY RUST on Ulster Knife Co Scout

Posted: Mon Jan 04, 2016 2:39 pm
by TripleF
rea1eye wrote:I have used mineral oil to both lubricate the joint and help restore a dull surface

on the scale. I have never soaked with mineral oil. I apply a thin coat on the

scale overnight and wipe off in the AM.

When buying mineral oil get the fragrance free variety. No need to expose the knife

to additional chemicals which might react with the blade/scale

Bob

Did you mean to reply to this thread:
http://www.allaboutpocketknives.com/kni ... =2&t=47159

Re: Restored HEAVY DUTY RUST on Ulster Knife Co Scout

Posted: Sat Jan 09, 2016 9:21 pm
by rexstubbins
Man that looks great Scott.

I just cleaned a German scout up today but used a scotch brite pad. Seems to be quicker work than sand paper. Used Flitz after that and cleaned up pretty good.

I use mineral oil on the scales and 3 in 1 on the joints.