300s and such.
-
- Posts: 113
- Joined: Sun Oct 18, 2020 2:53 pm
- Location: Colorado
Re: 300s and such.
Based on that chart I can assume my 309 with a date code of 1999 was Buck USA not Camillus.
Re: 300s and such.
Plus it has a date code, a different blade grind, and a short pull nick on the master blade. All 300's prior to that, (those made by Camillus), have a long pull.marinaio61 wrote: ↑Fri Nov 13, 2020 1:53 am Based on that chart I can assume my 309 with a date code of 1999 was Buck USA not Camillus.
BCCI Member #2863
Re: 300s and such.
What surprises me is that the Yachtsman was available twenty-five years (which meant it had to sell well to be able to be in the catalog that long), and people still treat it as a very rare, and expensive model.
Re: 300s and such.
True, they are kind of pricey on the secondary market, but I think it has more of the "cool factor" going for it than some of the other models, that may explain it. They made a few handle versions of the #315 too. I've seen smooth white bone and stag so far, also smooth Yellow Delrin, but I think there are others out there. The #315 had a Camillus clone, the Camillus #96 Nautical Knife. It was the foundation for the #315 and was built on the same frame, I have one of those too. as well as the bolsterless #315.
BCCI Member #2863
-
- Posts: 60
- Joined: Sat Jun 01, 2019 12:56 am
Re: 300s and such.
Almost every time I visit this forum, which is chock full of information about knives and related items, I wind up going to my memory box (1964/65 Gerstner tool chest) and pulling out a knife or two, to see if I have this variation or that one.
Tonight I have my 301 Stockman and the 307 Wrangler out to compare notes with a tidbit of information concerning springs that have patina or not. The Stockman I bought new way back in the day, and carried it for years before retiring it back to the box and tool chest. The Wrangler was brought into the family a couple of years ago and doesn't look like it's ever been sharpened.
Always interesting, entertaining and informative.
Have a blessed day,
Leon
Tonight I have my 301 Stockman and the 307 Wrangler out to compare notes with a tidbit of information concerning springs that have patina or not. The Stockman I bought new way back in the day, and carried it for years before retiring it back to the box and tool chest. The Wrangler was brought into the family a couple of years ago and doesn't look like it's ever been sharpened.
Always interesting, entertaining and informative.
Have a blessed day,
Leon
Re: 300s and such.
Wow, posts from past to near current date. I doubt anyone from past will read this post but lots of the photos shown were of Camillus made contract era 300''s. If it doesn't have a date code it generally wasn't put together in the Buck factory or had Buck steel and heat treating of blades. To have most of the Black Delrin scaled models up to say 1990, your going to need at least 56 in your box. Buck dropped production of the 309 and 305 last year. Use the search function to find out more info on 300's in this and that other knife forum.
300Bucks
300Bucks
- 1967redrider
- Gold Tier
- Posts: 16106
- Joined: Wed Feb 02, 2011 4:23 pm
- Location: Alexandria, VA
- Contact:
Re: 300s and such.
Railsplitter wrote: ↑Sat Jun 20, 2020 1:38 pm Great topic. My favorite (so far) of the 300 series is this 301 that was collectively designed by a few hundred members of another knife forum that I frequent. And one phenomenally helpful dealer. It's basically a 301 minus the Spey blade and third spring. Elk handle slabs, long pulls, and CPM-154 full flat ground blades.
IMG_5404.JPG
IMG_5405.JPG
IMG_5406.JPG
Awhile back I had an interest in the construction of the Black Sawcut Delrin 303 so I disassembled one to see how it was made. Here's a link to a post I made about it if anyone is interested. Long story short, you won't be losing the shield or handle slabs on a Black Sawcut 303.
viewtopic.php?f=53&t=63890&p=761725&hil ... ed#p761725
That is one spectacular 301! I have a couple 301s but nothing like that one.
Pocket, fixed, machete, axe, it's all good!
You're going to look awfully silly with that knife sticking out of your @#$. -Clint Eastwood, High Plains Drifter
You're going to look awfully silly with that knife sticking out of your @#$. -Clint Eastwood, High Plains Drifter
- Railsplitter
- Gold Tier
- Posts: 3165
- Joined: Wed Oct 17, 2007 10:43 pm
Re: 300s and such.
Thank you.1967redrider wrote: ↑Thu Nov 26, 2020 3:00 am That is one spectacular 301! I have a couple 301s but nothing like that one.
Rick T.
"My knife money maketh itself wings!" mb>
Proud member of the Buck Collectors Club Inc.
"My knife money maketh itself wings!" mb>
Proud member of the Buck Collectors Club Inc.
Re: 300s and such.
Wow, he does still exist!! Welcome 300, so good to hear from you again. Bert has been taking us to school, and I hope you pipe in more often and give him a hand, (I try to but Bert inevitably has to step in and correct me, as you have done many times), but that's ok, I learn from it every single time. For those who don't know, Mr. 300bucks here is one of the 300 Series gurus who took me under his wing and helped me gather my collection, and as his handle states, he has over 300 Bucks, (or more), and also has a treasure trove of written history too. Pay attention newbies, listen to what he says because he is one of THE sources of 300 Series info, any post he makes about 300's is spot on and very educational. Welcome, welcome. I am still looking for "versions" as you told me I would, but I have all the model numbers covered, including the SFO's, but those versions go on forever and ever it seems.300Bucks wrote: ↑Wed Nov 25, 2020 11:05 pm Wow, posts from past to near current date. I doubt anyone from past will read this post but lots of the photos shown were of Camillus made contract era 300''s. If it doesn't have a date code it generally wasn't put together in the Buck factory or had Buck steel and heat treating of blades. To have most of the Black Delrin scaled models up to say 1990, your going to need at least 56 in your box. Buck dropped production of the 309 and 305 last year. Use the search function to find out more info on 300's in this and that other knife forum.
300Bucks
BCCI Member #2863
Re: 300s and such.
Some late 300's made by Camillus , sold by Smokey Mountain Knife Works, were made with nail nics, not long pulls. Big Trappers, fish knives as examples. Cami.,, SMKWs got good friend naming rights from Buck, just not date codes.
Yachtsman had such a long life because Camillus was making them and were also marked with there own name. Buck Yachtsman were awarded to all Coast Guard Academy grads for several years and were sold in PX's all over the world. They were badges of honor for Boatswain Mates. For many years only they could carry them on board..
I'm still around just feel that Bert and a few others are finding info that I don't know and staying out of the way of progress.
300
Yachtsman had such a long life because Camillus was making them and were also marked with there own name. Buck Yachtsman were awarded to all Coast Guard Academy grads for several years and were sold in PX's all over the world. They were badges of honor for Boatswain Mates. For many years only they could carry them on board..
I'm still around just feel that Bert and a few others are finding info that I don't know and staying out of the way of progress.
300
Re: 300s and such.
Well, I for one am glad to hear from you, and yes Bert is a wonderful resource but so are you, don't be such a stranger.300Bucks wrote: ↑Sun Nov 29, 2020 5:21 am Some late 300's made by Camillus , sold by Smokey Mountain Knife Works, were made with nail nics, not long pulls. Big Trappers, fish knives as examples. Cami.,, SMKWs got good friend naming rights from Buck, just not date codes.
Yachtsman had such a long life because Camillus was making them and were also marked with there own name. Buck Yachtsman were awarded to all Coast Guard Academy grads for several years and were sold in PX's all over the world. They were badges of honor for Boatswain Mates. For many years only they could carry them on board..
I'm still around just feel that Bert and a few others are finding info that I don't know and staying out of the way of progress.
300
BCCI Member #2863
- Ridgegrass
- Posts: 5356
- Joined: Sun Aug 30, 2020 2:04 pm
- Location: Ocean City, MD
- Contact:
Re: 300s and such.
Picked up this 1992, 301- today in Millsboro, DE. It's nearly mint. Blades appear to have factory edges No brass in this one. It's a bit stained but I'm sure that will clean off easily. Tag said $8 so I didn't haggle. . Searched around on line, only saw one red one out of about 60 listed.. Feelin' lucky today. J.O'.
- Railsplitter
- Gold Tier
- Posts: 3165
- Joined: Wed Oct 17, 2007 10:43 pm
Re: 300s and such.
Nice score!Ridgegrass wrote: ↑Sun Nov 29, 2020 8:22 pm Picked up this 1992, 301- today in Millsboro, DE. It's nearly mint. Blades appear to have factory edges No brass in this one. It's a bit stained but I'm sure that will clean off easily. Tag said $8 so I didn't haggle. . Searched around on line, only saw one red one out of about 60 listed.. Feelin' lucky today. J.O'.
Rick T.
"My knife money maketh itself wings!" mb>
Proud member of the Buck Collectors Club Inc.
"My knife money maketh itself wings!" mb>
Proud member of the Buck Collectors Club Inc.
Re: 300s and such.
Ya cant beat that with a stick.. Super!!!Ridgegrass wrote: ↑Sun Nov 29, 2020 8:22 pm Picked up this 1992, 301- today in Millsboro, DE. It's nearly mint. Blades appear to have factory edges No brass in this one. It's a bit stained but I'm sure that will clean off easily. Tag said $8 so I didn't haggle. . Searched around on line, only saw one red one out of about 60 listed.. Feelin' lucky today. J.O'.
John
Not all who wander are lost!!
Of all the paths you take in life,
Make sure some of them are Dirt!!!
Of all the paths you take in life,
Make sure some of them are Dirt!!!
- Ridgegrass
- Posts: 5356
- Joined: Sun Aug 30, 2020 2:04 pm
- Location: Ocean City, MD
- Contact:
Re: 300s and such.
Thank you Gentlemen. I have very few Buck knives and don't really collect them but for $8, Mama didn't raise any fools! It's a nice piece! J.O'.
Re: 300s and such.
I am willing to triple your money!!!Ridgegrass wrote: ↑Mon Nov 30, 2020 4:22 pm Thank you Gentlemen. I have very few Buck knives and don't really collect them but for $8, Mama didn't raise any fools! It's a nice piece! J.O'.
John
Not all who wander are lost!!
Of all the paths you take in life,
Make sure some of them are Dirt!!!
Of all the paths you take in life,
Make sure some of them are Dirt!!!
- Ridgegrass
- Posts: 5356
- Joined: Sun Aug 30, 2020 2:04 pm
- Location: Ocean City, MD
- Contact:
Re: 300s and such.
JMH:
Thanks and I'll keep that in mind. Most Bucks I see have been well used and aren't in great "collectible" condition. This one is, so I grabbed it. It is literally the only Buck in my collection. Right now it's still "new" to me so I'll hang on to it for a little while. Try me in a month or so. ridgegrass@hotmail.com
Maybe we can trade or whatever.
Regards, J.O'.
Thanks and I'll keep that in mind. Most Bucks I see have been well used and aren't in great "collectible" condition. This one is, so I grabbed it. It is literally the only Buck in my collection. Right now it's still "new" to me so I'll hang on to it for a little while. Try me in a month or so. ridgegrass@hotmail.com
Maybe we can trade or whatever.
Regards, J.O'.
Re: 300s and such.
Sounds good. And thanks.Ridgegrass wrote: ↑Wed Dec 02, 2020 2:19 pm JMH:
Thanks and I'll keep that in mind. Most Bucks I see have been well used and aren't in great "collectible" condition. This one is, so I grabbed it. It is literally the only Buck in my collection. Right now it's still "new" to me so I'll hang on to it for a little while. Try me in a month or so. ridgegrass@hotmail.com
Maybe we can trade or whatever.
Regards, J.O'.
Not all who wander are lost!!
Of all the paths you take in life,
Make sure some of them are Dirt!!!
Of all the paths you take in life,
Make sure some of them are Dirt!!!
-
- Posts: 60
- Joined: Sat Jun 01, 2019 12:56 am
Re: 300s and such.
Have a blessed and Happy New Year ya'll.
Thought I would post a photo of my "300's".
Leon
Thought I would post a photo of my "300's".
Leon
Re: 300s and such.
John
Not all who wander are lost!!
Of all the paths you take in life,
Make sure some of them are Dirt!!!
Of all the paths you take in life,
Make sure some of them are Dirt!!!
Re: 300s and such.
I have three 301’s but the one I use and carry the most is my early 70’s model (non- stainless springs & double brass liners on one side). It’s a much better slicer than newer models due to the full flat grind also. Why did they change to the current Sabre grind?
-
- Posts: 60
- Joined: Sat Jun 01, 2019 12:56 am
Re: 300s and such.
It's bad when you post on a forum, then forget where you put those pretty knife photos. I posted photos of my "new" old Buck 303 just yesterday, now I haven't clue where I put them.
Maybe I can remember a forum with a title like this one. I hope I'm not breaking any rules.
My lovely wife bought me this little beauty at the Boaz knife show last weekend. It was just laying on the table looking like an orphan, all dirty and unkempt. I brought it home, cleaned it up, found out it's a 1st cousin to my 301 and 307, so I'm in the process of adopting it. Still has some dirt behind it's ears and other places, but I'm working on it.
It looks good in the family photo. I bought the 301 new sometime around 1970/75, the box paper insert has a date of Apr 4, 1972, and the 307 at a gun show about 3 years ago.
Have a blessed day,
Leon
Maybe I can remember a forum with a title like this one. I hope I'm not breaking any rules.
My lovely wife bought me this little beauty at the Boaz knife show last weekend. It was just laying on the table looking like an orphan, all dirty and unkempt. I brought it home, cleaned it up, found out it's a 1st cousin to my 301 and 307, so I'm in the process of adopting it. Still has some dirt behind it's ears and other places, but I'm working on it.
It looks good in the family photo. I bought the 301 new sometime around 1970/75, the box paper insert has a date of Apr 4, 1972, and the 307 at a gun show about 3 years ago.
Have a blessed day,
Leon
Re: 300s and such.
Congrats all around Leon.
John
John
Not all who wander are lost!!
Of all the paths you take in life,
Make sure some of them are Dirt!!!
Of all the paths you take in life,
Make sure some of them are Dirt!!!
Re: 300s and such.
Not all who wander are lost!!
Of all the paths you take in life,
Make sure some of them are Dirt!!!
Of all the paths you take in life,
Make sure some of them are Dirt!!!
-
- Posts: 60
- Joined: Sat Jun 01, 2019 12:56 am
Re: 300s and such.
Jmh58: Pretty knives, I don't have a bone handled one, but I was promised a set of deer antlers, I gotta pick them out myself.
Have a blessed day,
Leon
Have a blessed day,
Leon