Show Us Your Camillus Knives!

[Dan In MI]

This electrician's knife (pretty sure it's a 27) got to me recently. It will be an occasional carrier. Thanks to GSPTOPDOG for this one!

[Ripster]

The last one you posted by itself,is that part of the set or?

The last knife was purchased after a collective photo was taken .

Am not familiar with the Old Glory line .

Full line:
http://www.camillusknives.ru/camillus/o ... n_en.shtml

Thanks Vit, that’s a nice Series of knives. Didn’t realize there were that many in the Series

[Ripster]

This electrician's knife (pretty sure it's a 27) got to me recently. It will be an occasional carrier. Thanks to GSPTOPDOG for this one!

Electrician's Knife.jpg

Electrician's Knife Opened.jpg

Electrician's Knife Tang Stamp.jpg

Dan , good choice ,that’s the handiest dang knive to have laying around . Don’t see many with that blade etch,nice touch .

[Papa Bones]

Added a couple to my Camillus family today.
First, another Camillus 21 Pony Jack.2-13/16 inches closed, It has the long line Camillus tang stamp on the front side of the clip blade, with 21 on the pile side with a pen secondary blade. It has the brown jigged( what Camillus called "Brownstag") handles, and was not produced with a shield. Blades are tight, great snap, no wobble, have the factory luster, but does have some spotting. Inside of blade well and springs are clean. The only thing I've done is oil the joints. Here are the photos.

I also added a Camillus 14 Serpentine Jack. It is also has the Camillus long line tang stamp on the front side of the clip blade with 14 on the pile side, with a pen secondary blade. The blades are tight, no wobble, and great snap. They have the original luster, but do have some staining and spots. The Handles are the Brownstag handles with a federal shield. The handles do have some slight oxidation, but I believe I can cure that with the usual warm mineral oil soak. Inside the blade well is clean with just some slight spotting on the springs. At the present time all I've done is oil the joints. Here are the photos.

[Dan In MI]

Thanks for the kudos, JP. Now I have an excuse to get more of them!

And Smitty, I'll say it again: your pocket Jacks form a winning hand!

[Papa Bones]

Thanks for the kudos, JP. Now I have an excuse to get more of them!

And Smitty, I'll say it again: your pocket Jacks form a winning hand!

Thanks Dan, and I'm sure that good looking 27 will show up in the "What are you carrying right now" thread.

[New_Windsor_NY]

This.....

Dan, that's a VERY g@@d lking piece of cutlery!

Added.....

FANTASTIC acquisitions, Smitty.

[Dan In MI]

Thanks, Skip. I hope to add more of them!

[Papa Bones]

FANTASTIC acquisitions, Smitty.

Appreciate it Skip!!

[GSPTOPDOG]

This electrician's knife (pretty sure it's a 27) got to me recently. It will be an occasional carrier. Thanks to GSPTOPDOG for this one!

Electrician's Knife.jpg

Electrician's Knife Opened.jpg

Electrician's Knife Tang Stamp.jpg

Hey that is a great looking knife!!!

[GSPTOPDOG]

Added a couple to my Camillus family today.
First, another Camillus 21 Pony Jack.2-13/16 inches closed, It has the long line Camillus tang stamp on the front side of the clip blade, with 21 on the

A very nice Camillus 21 Pony Jack.

[cody6268]

This electrician's knife (pretty sure it's a 27) got to me recently. It will be an occasional carrier. Thanks to GSPTOPDOG for this one!

Electrician's Knife.jpg

Electrician's Knife Opened.jpg

Electrician's Knife Tang Stamp.jpg

Nice!


Those things are addicting. I started with just a Colonial my Granddad gave me, as well as a 1980s Camillus, the first knife I bought online when I was 17. At last count, I had one each in my toolboxes, one in my compact toolkit, several users (not all Camillus), and a Craftsman (which I think is Camillus-made) 9560 and a WWII era TL-29 in the collection. This doesn't count Schrade versions, as well as assorted others like a Colonial.

I still need to add Xcelite (there's also a tang-stamped "XCELITE" version) and the two Channellock versions (there's both the typical black, as well as a sort of rare Channellock Blue handle version; which I've seen exactly ONE of).

[Ripster]

This electrician's knife (pretty sure it's a 27) got to me recently. It will be an occasional carrier. Thanks to GSPTOPDOG for this one!

Electrician's Knife.jpg

Electrician's Knife Opened.jpg

Electrician's Knife Tang Stamp.jpg

Nice!


Those things are addicting. I started with just a Colonial my Granddad gave me, as well as a 1980s Camillus, the first knife I bought online when I was 17. At last count, I had one each in my toolboxes, one in my compact toolkit, several users (not all Camillus), and a Craftsman (which I think is Camillus-made) 9560 and a WWII era TL-29 in the collection. This doesn't count Schrade versions, as well as assorted others like a Colonial.

I still need to add Xcelite (there's also a tang-stamped "XCELITE" version) and the two Channellock versions (there's both the typical black, as well as a sort of rare Channellock Blue handle version; which I've seen exactly ONE of).

Cody, didn’t know that the Channellock blue was sort of rare,just saw one on the bay believe it was . If I can find it will get you info if interested,think I put it on my watch list .

[Dan In MI]

Hey that is a great looking knife!!!

Indeed it is.

Those things are addicting.

Yes indeed...right up there with Alox Swiss Army knives. I'm already looking for more.

Didn't know that the Channellock blue was sort of rare,just saw one on the bay believe it was .

Was it this one?

https://www.ebay.com/itm/224356893830

[Ripster]

Hey that is a great looking knife!!!

Indeed it is.

Those things are addicting.

Yes indeed...right up there with Alox Swiss Army knives. I'm already looking for more.

[

Yep, that’s it . Go for it Dan ,make em a offer . Am passing on this one. They don’t come up for sale often
Was it this one?

https://www.ebay.com/itm/224356893830
[/quote]

Yes that’s the one, go for it,am going to pass on this one. Like you said Dan, not many out there .

[Dan In MI]

Yes that’s the one, go for it,am going to pass on this one.

It's in my watch list for now. But I did get a seller offer on a Channel-Lock 27. For less than $15 out-the-door, I couldn't pass it up!

[Papa Bones]

added a couple more to my Camillus family. Both came with the boxes, original papers, and sleeve. One is a 1997 Camillus Rimfire Classic 22LR6 Carpenters Whittler (a 72 Clone) and has delrin handles with the .22 rimfire brass shield. Next is a 1995 Camillus Rimfire Classic 22LR4 Muskrat, same handles same shield. Both have the Rimfire Classic etch on the master blades and the pattern number and year on the pile side tang of the master blade.

[New_Windsor_NY]

added.....

They're both BEAUTIES, Smitty.
Boxes and paperwork, BONUS!

[doglegg]

Glad you got those Papa Bones. Both in perfect shape.

[Ripster]

Smitty, you’ve been busy and doing well . Nice couple of knives, and as mentioned,always nice to get the boxes ,etc,with the knife .
Well done

[Papa Bones]

They're both BEAUTIES, Smitty.
Boxes and paperwork, BONUS!

Thank you Skip. The 22LR6 I was really hyped for.

Glad you got those Papa Bones. Both in perfect shape.

Appreciate it FLoyd.

Smitty, you’ve been busy and doing well . Nice couple of knives, and as mentioned,always nice to get the boxes ,etc,with the knife .
Well done

Thanks JP. I added the correct pile side photo. Just noticed I had two of the mark side posted. All good though!

[Dan In MI]

added a couple more to my Camillus family.

Nice pick-ups, Smitty!

[Quick Steel]

This Camillus Rope Knife or Sailor's Knife has a locking Marlinspike which is released by the bail.

[New_Windsor_NY]

This.....

Garry,

[doglegg]

QS, I keep looking at those but have yet to pull the trigger. Yours is a motivation.