The Western Bowie / W49 Identification Thread

In 1911, H. N. Platts, was able to draw on his extensive friendships and family connections in the cutlery world to start Western States Cutlery and Manufacturing of Boulder Colorado. At first only a jobbing business, by 1920 construction and machinery purchases were underway to begin manufacture of knives. Through name changes--to Western States Cutlery Co. in 1953, then Western Cutlery Co. in 1956--and moves first across town and later to Longmont Colorado, the company stayed under the leadership of the Platt family until 1984. In that year, the company was sold to Coleman, becoming Coleman-Western. Eventually purchased by Camillus in 1991, Western continued until Camillus expired in 2007.
Khopesh
Posts: 26
Joined: Sat Feb 17, 2018 6:38 am

Re: The Western Bowie / W49 Identification Thread

Post by Khopesh »

Hey thanks for the reply Doubble Z.

I just now, today realized I posted in a “Western Bowie” thread, in which this knife is not. I was up late and a bit groggy! LOL

So, how long do you believe this knife to be from stem to stern (end to end)? The condition looks rough. I’ve only seen the pics so far. Also, (I know it’s difficult to assess from only pics) but if you were to ‘take a stab’ at the value, what would it be.I have not ruled out buying it, but unsure what to offer.

Thanks again for any replies!

Oh, right after I sent the first message I found this...
(Isn’t that how it always goes though!)
Attachments
Western 1
Western 1
Western 2
Western 2
Western 3
Western 3
Western 4
Western 4
User avatar
zzyzzogeton
Posts: 1722
Joined: Tue Jun 20, 2017 8:47 pm
Location: In the Heart of Texas on the Blackland Prairie

Re: The Western Bowie / W49 Identification Thread

Post by zzyzzogeton »

Value is hard to determine, especially just from pics. In general, the 48As will run from $20 to $80, depending on condition and who's looking for them at the time.

That one looks like it's been rode hard and put up wet. Probably will clean up well, but the sheath will always stay rough. I personally would not pay over $30 or $40 for it, but then I have a bunch of then already.
Khopesh
Posts: 26
Joined: Sat Feb 17, 2018 6:38 am

Re: The Western Bowie / W49 Identification Thread

Post by Khopesh »

Okay great. Thanks for the advice. I don’t have any of them, and was going to start with this one if I can get it for cheap.
It was posted at $150, which made me laugh. I initially was going to offer $20, and see how many swear words I can evoke from the fellow! LOL

People often think I’m lowballing them, but in reality I’m just offering what I think is a fair price, condition and all.

Thanks again ZZ.
ExclusiveTexan
Posts: 3
Joined: Mon Jun 29, 2020 6:25 am

Re: The Western Bowie / W49 Identification Thread

Post by ExclusiveTexan »

Hello,
I realize this is an older thread but I was wondering if anyone was still following it? I have several W49’s and had a few questions.
Thanks,
Brian
ExclusiveTexan
Posts: 3
Joined: Mon Jun 29, 2020 6:25 am

Re: The Western Bowie / W49 Identification Thread

Post by ExclusiveTexan »

50121F1D-BC50-4C82-AA28-FE7B62001443.jpeg
These are a few I’m going to sell. I’ve collected W49’s for 20 years. I used to give them as gifts to good customers and vendors for something different. I’m keeping my 6 favorite and still have these 9 to let go. If anyone has any interest, I can get better and more specific pics for you. (I’m also selling a few of my Ames 1833 Dragoon Swords)
Thanks,
Brian
User avatar
Mumbleypeg
Gold Tier
Gold Tier
Posts: 13409
Joined: Fri Apr 18, 2014 1:28 am
Location: Republic of Texas

Re: The Western Bowie / W49 Identification Thread

Post by Mumbleypeg »

Welcome to AAPK. Nice looking knives from what I can see. There are some here who collect those and might be interested. To sell here on AAPK you need to first buy a premium membership. See details at the top right where it says “support AAPK”. Just click on that for info. Then you should list them in the Knife Commerce section.

Ken
Member AKTI, TSRA, NRA.

If your religion requires that you hate someone, you need a new religion.

When the people fear their government, that is tyranny. When government fears the people, that is freedom.

https://www.akti.org/
ExclusiveTexan
Posts: 3
Joined: Mon Jun 29, 2020 6:25 am

Re: The Western Bowie / W49 Identification Thread

Post by ExclusiveTexan »

Gotcha! Thank you!!
Rocketrider33
Posts: 1
Joined: Wed May 15, 2019 4:33 pm
Contact:

Re: The Western Bowie / W49 Identification Thread

Post by Rocketrider33 »

Okay so after reading thee entire thread I still have seen no mention of the particular W49 Coleman Western bowie I recently purchased for $80 it is only marked on one side of the blade WESTERN W49 with a date code or letter M underneath and the sheath has a danger and leather thong also the snap also has coleman/western on it as well... I see that since the boss sold Cold Steel knives they've mass produced their version of this called a western bowie and they range for right around $80-90 new so I figured at the same price I'm able to own an original and it certainly has a weathered sheath and pitted blade from being stored in it so I do believe it to be a few years old at the very least lol any info could help thanks but even if I over paid I'm still very happy with my purchase as the knife has an unused factory edge on it still which is quite sharp and I'm guessing by the blade pitting it has to be a mid to high carbon content maybe? If need be I will dig it back out and try to post a pic or two...
User avatar
zzyzzogeton
Posts: 1722
Joined: Tue Jun 20, 2017 8:47 pm
Location: In the Heart of Texas on the Blackland Prairie

Re: The Western Bowie / W49 Identification Thread

Post by zzyzzogeton »

Rocketrider33 wrote: Wed Jul 21, 2021 7:47 am Okay so after reading thee entire thread I still have seen no mention of the particular W49 Coleman Western bowie I recently purchased for $80 it is only marked on one side of the blade WESTERN W49 with a date code or letter M underneath and the sheath has a danger and leather thong also the snap also has coleman/western on it as well... I see that since the boss sold Cold Steel knives they've mass produced their version of this called a western bowie and they range for right around $80-90 new so I figured at the same price I'm able to own an original and it certainly has a weathered sheath and pitted blade from being stored in it so I do believe it to be a few years old at the very least lol any info could help thanks but even if I over paid I'm still very happy with my purchase as the knife has an unused factory edge on it still which is quite sharp and I'm guessing by the blade pitting it has to be a mid to high carbon content maybe? If need be I will dig it back out and try to post a pic or two...
Post number 9 covers these. Version 10 in my books. "M" means 1989. 1095CV steel.
User avatar
1967redrider
Gold Tier
Gold Tier
Posts: 16106
Joined: Wed Feb 02, 2011 4:23 pm
Location: Alexandria, VA
Contact:

Re: The Western Bowie / W49 Identification Thread

Post by 1967redrider »

Finally located my Coleman Western W49 M. Hard to believe such a large knife could come up missing. ::uc::


Good to know it's 1095CV. ::tu::
Attachments
IMG_20210722_183343628.jpg
IMG_20210722_183327313.jpg
IMG_20210722_183309118.jpg
Pocket, fixed, machete, axe, it's all good!

You're going to look awfully silly with that knife sticking out of your @#$. -Clint Eastwood, High Plains Drifter
amhohl
Posts: 4
Joined: Wed Jan 19, 2022 12:41 pm

Re: The Western Bowie / W49 Identification Thread

Post by amhohl »

Good morning! New to the forum. I recently inherited a Western Bowie and was hoping to get some more information. Based on the contents of this thread, I believe I have a stainless steel version #1 (67-68). The blade has some rough spots from someone's attempts to sharpen and the condition of the sheath seems a bit too good to be true. Also, the pic is hard to see but it says "stainless steel" above "Bowie"

See pics below. Any additional info on value, version/model, etc. would be much appreciated!
Attachments
20220119_074737.jpg
20220119_074835.jpg
20220119_074849.jpg
20220119_074902.jpg
20220119_074928.jpg
User avatar
zzyzzogeton
Posts: 1722
Joined: Tue Jun 20, 2017 8:47 pm
Location: In the Heart of Texas on the Blackland Prairie

Re: The Western Bowie / W49 Identification Thread

Post by zzyzzogeton »

Yes, this is an S649. Came out in late 1967, advertised as "NEW" in the 1968 catalog. Stainless steel blade (440A). Delrin handle. Correct sheath. Looks like someone tried to slim down the handle and/or round off the edges of the handle slabs.
amhohl
Posts: 4
Joined: Wed Jan 19, 2022 12:41 pm

Re: The Western Bowie / W49 Identification Thread

Post by amhohl »

Great, thanks for the info. I appreciate it. I assume the handle modifications have decreased the overall value, correct? Are these western s649 models rare?
Broddi
Posts: 3
Joined: Thu Feb 17, 2022 9:08 am

Re: The Western Bowie / W49 Identification Thread

Post by Broddi »

My western 49. I don't have the collectable one anymore unfortunately
Attachments
2021-01-06~2.jpg
received_1427075597707055_1.jpg
received_669862700707974_1.jpg
received_460815952344977_1_1.jpg
received_369838594561805_1.jpg
Broddi
Posts: 3
Joined: Thu Feb 17, 2022 9:08 am

Re: The Western Bowie / W49 Identification Thread

Post by Broddi »

Few more pics of my M year
Attachments
IMG_20220322_031223546~2.jpg
IMG_20220322_031234800~2.jpg
IMG_20220322_031210816~2.jpg
IMG_20220321_152236145~3.jpg
Broddi
Posts: 3
Joined: Thu Feb 17, 2022 9:08 am

Re: The Western Bowie / W49 Identification Thread

Post by Broddi »

Few more pics of my restored 49
Attachments
IMG_20220323_004209536~2.jpg
IMG_20220323_003214024~2.jpg
IMG_20220323_003259121~2.jpg
User avatar
Meridian_Mike
Posts: 4981
Joined: Mon Apr 21, 2014 8:36 pm
Location: Mississippi

Re: The Western Bowie / W49 Identification Thread

Post by Meridian_Mike »

I was gifted a W49 set of parts with a sheath.
Here is a couple of pics showing before and then after I assembled it.......

40DE83D7-4D06-4049-9761-A01072913016_1_105_c.jpeg
B82365A9-9800-4BE7-8CBE-6AFAEF6E88E1_1_105_c.jpeg

I think I need to read back thru the thread to figure out the approximate year of this hefty joker.... LOL.

Maybe you W49 Bowie collectors can shed some light on it.

As the story goes, the previous owner got it from a person who worked for Western Cutlery back in the day.

::shrug::
"Life is tough.... but it's tougher if you're stupid."....John Wayne
User avatar
zzyzzogeton
Posts: 1722
Joined: Tue Jun 20, 2017 8:47 pm
Location: In the Heart of Texas on the Blackland Prairie

Re: The Western Bowie / W49 Identification Thread

Post by zzyzzogeton »

Meridian_Mike wrote: Wed Aug 24, 2022 9:55 pm I was gifted a W49 set of parts with a sheath.
Here is a couple of pics showing before and then after I assembled it.......


40DE83D7-4D06-4049-9761-A01072913016_1_105_c.jpeg


B82365A9-9800-4BE7-8CBE-6AFAEF6E88E1_1_105_c.jpeg


I think I need to read back thru the thread to figure out the approximate year of this hefty joker.... LOL.

Maybe you W49 Bowie collectors can shed some light on it.

As the story goes, the previous owner got it from a person who worked for Western Cutlery back in the day.

::shrug::
It is a Camillus version, 1993 is 1095, 1994 or later is SS. The "strap-over-guard" restraining strap type sheath is a Camillus sheath tell. The stamp is also a Camillus stamp - the USA and W49 are reversed from the Western/Western-Coleman era order and there is no date code letter.
User avatar
Meridian_Mike
Posts: 4981
Joined: Mon Apr 21, 2014 8:36 pm
Location: Mississippi

Re: The Western Bowie / W49 Identification Thread

Post by Meridian_Mike »

zzyzzogeton wrote: Thu Aug 25, 2022 1:21 am
It is a Camillus version, 1993 is 1095, 1994 or later is SS. The "strap-over-guard" restraining strap type sheath is a Camillus sheath tell. The stamp is also a Camillus stamp - the USA and W49 are reversed from the Western/Western-Coleman era order and there is no date code letter.
Thanks for the detailed info!

As I understand it, the person that gifted this knife to me (through my son) has other Western knife parts.
I might have to send word I am in interested in some other pieces if he is willing to part with them.

::tu::
"Life is tough.... but it's tougher if you're stupid."....John Wayne
CincoPeso830
Posts: 1
Joined: Fri Dec 09, 2022 6:21 am

Re: The Western Bowie / W49 Identification Thread

Post by CincoPeso830 »

I obtained my Western Bowie W49 a couple years ago when I bought some leather crafting tools at an estate sale. I put the knife away and only brought it out a couple days ago and decided I wanted to clean it up (it has rust and some pitting). I was thinking about polishing it up and possibly inlaying an enamel medallion from my Army unit I served in Somalia with in 1993.

I decided to see what I could find out about it and it seems that it isn’t just a Bowie it is a collectors item. I have the “WESTERN” , “U.S.A W49”, “M” one three separate lines see photo.

Now that I know it is a collectors Bowie maybe I won’t mess it up by customizing. I don’t know if it has any monetary value or not. Anyone have any ideas?

You can see that I have been working on one side already the other side I haven’t touched yet. I plan on getting it to a mirror finish to where it likely was when it was originally bought.
Attachments
511F5813-7180-4C68-8AC6-1AE0DE0F5E91.jpeg
ADF97AD5-4F59-4AFA-A59C-7EB9DC8743A1.jpeg
57BDF409-4F27-45D5-9B71-7652646CF1EE.jpeg
Felanmac
Posts: 28
Joined: Thu Jul 22, 2021 4:14 am
Location: Idaho

Re: The Western Bowie / W49 Identification Thread

Post by Felanmac »

I have an interesting W49. I got this from a fellow who said his grandpa used to drink beer with Mr. Platts at the factory in Boulder. He acquired some rare Westerns doing this. This is supposedly a prototype!
Attachments
55706517-B882-448F-B0D2-8B809B3E01B8.jpeg
DD25CFEF-614D-4121-B1D0-2608B2C68315.jpeg
8603ED61-DCFE-46E1-BB4E-8AD3210B7F3F.jpeg
A man without a knife is a man without a life
User avatar
zzyzzogeton
Posts: 1722
Joined: Tue Jun 20, 2017 8:47 pm
Location: In the Heart of Texas on the Blackland Prairie

Re: The Western Bowie / W49 Identification Thread

Post by zzyzzogeton »

Very unique piece of Western history.
Felanmac
Posts: 28
Joined: Thu Jul 22, 2021 4:14 am
Location: Idaho

Re: The Western Bowie / W49 Identification Thread

Post by Felanmac »

Thank you Zzyzz! I very much respect your opinion. I have some other “unique” Westerns that I acquired from the fellow. They are not W49s, so I won’t clutter this thread with them. I still have yet to find a first gen W49 😁
A man without a knife is a man without a life
cmfgoobie
Posts: 1
Joined: Sun Jan 22, 2023 9:16 pm

Re: The Western Bowie / W49 Identification Thread

Post by cmfgoobie »

it is very interesting as i get older the things i have had in my possession for many years. i was given this knife when i was @10 ( 40 years ago) i'm just trying to determine it approximate age. i have been googling images and have yet to find a sheath that is the same and wonder if that is a clue to the age of it.
Attachments
20230122_161842.jpg
20230122_161810.jpg
20230122_161815.jpg
20230122_161824.jpg
User avatar
zzyzzogeton
Posts: 1722
Joined: Tue Jun 20, 2017 8:47 pm
Location: In the Heart of Texas on the Blackland Prairie

Re: The Western Bowie / W49 Identification Thread

Post by zzyzzogeton »

See post #3
Post Reply

Return to “Western Cutlery Collector's Forum”