A place for every one to post their small western knifes .
Re: A place for every one to post their small western knifes .
A great looking pile of hardware, Thomas. So easy on the eyes.
Although they don't measure up your knives I hope to contribute a few of mine to your nice thread tomorrow.
Although they don't measure up your knives I hope to contribute a few of mine to your nice thread tomorrow.
Joe
Re: A place for every one to post their small western knifes .
What is the quality level of Western knives? Similar to Case, Schrade, Camille’s, etc?
I have seen Western knives time to time but don’t own any,
Bob
I have seen Western knives time to time but don’t own any,
Bob
- tongueriver
- Posts: 6840
- Joined: Tue Sep 16, 2008 8:01 pm
Re: A place for every one to post their small western knifes .
That is a nice collection of Westerns, for sure! I have a few larger ones but this one is small enough to be here?
Re: A place for every one to post their small western knifes .
Western knives are somewhat scarce here in the SouthEast. Few here except for the dedicated collectors, or the educated members of this forum, seem to have even heard of them.
I have only 3:
I have a weak spot for Campers (being an Eagle Scout) - they just bring back fond memories! Anyway, I bought two of these Western campers. This one has a few scratches from use on the main, but is otherwise in great shape. It still has the factory edge.
These are sturdy knives with beefy liners! The second one that I bought had a broken backspring, so I made it into a two-blade. It has been missing for a few months now - probably in a coat pocket somewhere.
This one was worn out when I got it, with a broken blade. I ground down and polished the broken nub to make it useful again. The main is worn to a sliver, but holds a wicked edge He doesn't get a lot of pocket time, but I let him open mail occasionally so that he can still feel useful.
I have only 3:
I have a weak spot for Campers (being an Eagle Scout) - they just bring back fond memories! Anyway, I bought two of these Western campers. This one has a few scratches from use on the main, but is otherwise in great shape. It still has the factory edge.
These are sturdy knives with beefy liners! The second one that I bought had a broken backspring, so I made it into a two-blade. It has been missing for a few months now - probably in a coat pocket somewhere.
This one was worn out when I got it, with a broken blade. I ground down and polished the broken nub to make it useful again. The main is worn to a sliver, but holds a wicked edge He doesn't get a lot of pocket time, but I let him open mail occasionally so that he can still feel useful.
Jesus is life.
Everything else is just a hobby.
~Reverand
Everything else is just a hobby.
~Reverand
Re: A place for every one to post their small western knifes .
That’s some really nice bone.I had a friend ask me why I like the western knifes.my response was everyone has a drawer full of case knifes .loltongueriver wrote: ↑Sun Sep 04, 2022 4:36 pm That is a nice collection of Westerns, for sure! I have a few larger ones but this one is small enough to be here?
tiny Western stockman001.jpgws1.jpgws2.jpg
Re: A place for every one to post their small western knifes .
Here are my two small slip-joint Westerns. The top one was a high school graduation gift more than 60 years ago from the landlady of the rooming house where I lived. The bottom one I found about that same time along the foundation of an abandoned ranch house. That one was so rusted that I had to soak it in kerosene for a couple of weeks just to get the blades to move a little bit. The bolsters and bone handles are still like new, but the blades and spring are badly pitted from rust. This one has the old curved Western States tang stamp. Is it strange that the shield is on the pile side rather than the mark side of this one?
- Steve Warden
- Posts: 6322
- Joined: Wed May 27, 2015 4:18 pm
- Location: Cherry Hill, NJ
Re: A place for every one to post their small western knifes .
It's a left handed knife.
Really, no idea. But I do like the bone on that one.
Take care and God bless,
Steve
TSgt USAF, Retired
1980-2000
But any knife is better than no knife! ~ Mumbleypeg (aka Ken)
Steve
TSgt USAF, Retired
1980-2000
But any knife is better than no knife! ~ Mumbleypeg (aka Ken)
- Mumbleypeg
- Gold Tier
- Posts: 13455
- Joined: Fri Apr 18, 2014 1:28 am
- Location: Republic of Texas
Re: A place for every one to post their small western knifes .
Bob, since I don’t see that anyone else answered your question, here’s my opinion. Western was founded by H. N. Platts after he sold out his share of W.R. Case & Sons to his brother in law Russ Case, and moved to Colorado for health reasons (he had “grinder’s consumption). Prior to joining W.R.Case he was a partner in Platts & Sons, which he eventually merged with W.R. Case. (Causing the company name to change from W.R. CASE & SON, to W.R. CASE & SONS). While at Case he oversaw the manufacturing operations. I’m telling you this so you understand that H.N. Platts knew the Cutlery business inside and out.
Initially after he started Western in 1911, H.N. operated as a jobber, with knives being supplied mostly by W.R. Case and having the Western stamp on them. Then Western equipped their factory and began making their own knives, which they did for many decades. The quality was excellent, certainly the equal to Case, Schrade, Robeson, Camillus, etc. This was during the 1st half of the 20th century - if you didn’t make quality cutlery you did not survive. Some are of the opinion (justifiably IMHO) Western carbon steel was the equal of or better than any factory-made knives. Eventually (1980-ish) Western was sold and a series of companies acquired the name, moved the operation to other locations, etc. At one time the name was owned by Coleman, then by Camillus.
There’s an entire subforum on Western with more info, and many here who collect Western knives and can tell you more. If you’re interested, start here https://www.allaboutpocketknives.com/kn ... 07#p762056
Ken
Member AKTI, TSRA, NRA.
If your religion requires that you hate someone, you need a new religion.
When the people fear their government, that is tyranny. When government fears the people, that is freedom.
https://www.akti.org/
If your religion requires that you hate someone, you need a new religion.
When the people fear their government, that is tyranny. When government fears the people, that is freedom.
https://www.akti.org/
- jerryd6818
- Gold Tier
- Posts: 39177
- Joined: Sun Jan 04, 2009 5:23 am
- Location: The middle of the top of a bastion of Liberalism.
Re: A place for every one to post their small western knifes .
Small you say? :How small?
Forged on the anvil of discipline.
The Few. The Proud.
Jerry D.
This country has become more about sub-groups than about it's unity as a nation.
"The #72 pattern has got to be pretty close to the perfect knife."
--T.J. Murphy 2012
The Few. The Proud.
Jerry D.
This country has become more about sub-groups than about it's unity as a nation.
"The #72 pattern has got to be pretty close to the perfect knife."
--T.J. Murphy 2012
Re: A place for every one to post their small western knifes .
>
Bob, since I don’t see that anyone else answered your question, here’s my opinion. Western was founded by H. N. Platts after he sold out his share of W.R. Case & Sons to his brother in law Russ Case, and moved to Colorado for health reasons (he had “grinder’s consumption). Prior to joining W.R.Case he was a partner in Platts & Sons, which he eventually merged with W.R. Case. (Causing the company name to change from W.R. CASE & SON, to W.R. CASE & SONS). While at Case he oversaw the manufacturing operations. I’m telling you this so you understand that H.N. Platts knew the Cutlery business inside and out.
Initially after he started Western in 1911, H.N. operated as a jobber, with knives being supplied mostly by W.R. Case and having the Western stamp on them. Then Western equipped their factory and began making their own knives, which they did for many decades. The quality was excellent, certainly the equal to Case, Schrade, Robeson, Camillus, etc. This was during the 1st half of the 20th century - if you didn’t make quality cutlery you did not survive. Some are of the opinion (justifiably IMHO) Western carbon steel was the equal of or better than any factory-made knives. Eventually (1980-ish) Western was sold and a series of companies acquired the name, moved the operation to other locations, etc. At one time the name was owned by Coleman, then by Camillus.
There’s an entire subforum on Western with more info, and many here who collect Western knives and can tell you more. If you’re interested, start here https://www.allaboutpocketknives.com/kn ... 07#p762056
Ken
[/quote]
Thanks Ken. It is interesting that somewhere in most knife companies history the name Case pops up. I think your statement that
in the first half of the 20th century if you made poor quality cutlery you certainly would not survive is very correct.
Bob
Bob, since I don’t see that anyone else answered your question, here’s my opinion. Western was founded by H. N. Platts after he sold out his share of W.R. Case & Sons to his brother in law Russ Case, and moved to Colorado for health reasons (he had “grinder’s consumption). Prior to joining W.R.Case he was a partner in Platts & Sons, which he eventually merged with W.R. Case. (Causing the company name to change from W.R. CASE & SON, to W.R. CASE & SONS). While at Case he oversaw the manufacturing operations. I’m telling you this so you understand that H.N. Platts knew the Cutlery business inside and out.
Initially after he started Western in 1911, H.N. operated as a jobber, with knives being supplied mostly by W.R. Case and having the Western stamp on them. Then Western equipped their factory and began making their own knives, which they did for many decades. The quality was excellent, certainly the equal to Case, Schrade, Robeson, Camillus, etc. This was during the 1st half of the 20th century - if you didn’t make quality cutlery you did not survive. Some are of the opinion (justifiably IMHO) Western carbon steel was the equal of or better than any factory-made knives. Eventually (1980-ish) Western was sold and a series of companies acquired the name, moved the operation to other locations, etc. At one time the name was owned by Coleman, then by Camillus.
There’s an entire subforum on Western with more info, and many here who collect Western knives and can tell you more. If you’re interested, start here https://www.allaboutpocketknives.com/kn ... 07#p762056
Ken
[/quote]
Thanks Ken. It is interesting that somewhere in most knife companies history the name Case pops up. I think your statement that
in the first half of the 20th century if you made poor quality cutlery you certainly would not survive is very correct.
Bob
Re: A place for every one to post their small western knifes .
Jerry, just how many brands and knives do you own? It must be massive.
Bob
- jerryd6818
- Gold Tier
- Posts: 39177
- Joined: Sun Jan 04, 2009 5:23 am
- Location: The middle of the top of a bastion of Liberalism.
Re: A place for every one to post their small western knifes .
I don't know.
Forged on the anvil of discipline.
The Few. The Proud.
Jerry D.
This country has become more about sub-groups than about it's unity as a nation.
"The #72 pattern has got to be pretty close to the perfect knife."
--T.J. Murphy 2012
The Few. The Proud.
Jerry D.
This country has become more about sub-groups than about it's unity as a nation.
"The #72 pattern has got to be pretty close to the perfect knife."
--T.J. Murphy 2012
Re: A place for every one to post their small western knifes .
Some great knifes being posted.Jerry how about size limit being amended to any knife that is not a fixed blade? Lol
- jerryd6818
- Gold Tier
- Posts: 39177
- Joined: Sun Jan 04, 2009 5:23 am
- Location: The middle of the top of a bastion of Liberalism.
Re: A place for every one to post their small western knifes .
Good idea. I've already posted all that I have.
Forged on the anvil of discipline.
The Few. The Proud.
Jerry D.
This country has become more about sub-groups than about it's unity as a nation.
"The #72 pattern has got to be pretty close to the perfect knife."
--T.J. Murphy 2012
The Few. The Proud.
Jerry D.
This country has become more about sub-groups than about it's unity as a nation.
"The #72 pattern has got to be pretty close to the perfect knife."
--T.J. Murphy 2012
- tongueriver
- Posts: 6840
- Joined: Tue Sep 16, 2008 8:01 pm
Re: A place for every one to post their small western knifes .
Their agate celluloid was a knockout.
Re: A place for every one to post their small western knifes .
Great celluloid on a very nice hunter, Cal.
Joe