No one will build one for me!
No one will build one for me!
I wanted someone to build me a 10.75" Fishtail Pick Lock with a blade made from CPM-S30V Steel and a healthy sear pin made from long-wearing materials. I would like to have liners made from titanium and solid nickel-silver bolsters and other hardware.
I would be willing to cough up more than $1800 for this knife, because it would be a modern iteration of the knife my father carried on deck during WW2, Korea and in the Bremerton US Navy Shipyards.
Sad, isn't it?
I would be willing to cough up more than $1800 for this knife, because it would be a modern iteration of the knife my father carried on deck during WW2, Korea and in the Bremerton US Navy Shipyards.
Sad, isn't it?
Re: No one will build one for me!
Maybe you just didn't offer enough. Custom knives to order can be VERY pricey!
Re: No one will build one for me!
I asked Paul Panak (Burn Custom Knives) to build the piece for any price and was turned down.
You figure it out.
You figure it out.
Re: No one will build one for me!
There is a guy who is having modern pick locks made in Italy in the area they originally came from. Charlie Campanolo or something like that. Maybe somebody here in the switchblade forum can give you better info on him, perhaps he could have it done over there. Don't know if they'd do the titanium liners but it never hurts to ask. Labor is cheaper over there and they still make a quality picklock. You may just be able to buy an exact modern copiy of the one your dad had without the fancy steel and liners. If they would make it for you in Italy it would help if you supplied the metal. There are also hundreds of custom knife makers in the US, maybe you just have ask the right one.
- Bill DeShivs
- Posts: 708
- Joined: Sun Oct 07, 2012 4:57 am
- Contact:
Re: No one will build one for me!
Did you ask Pat Havlin or Jeremy Kreis?
Bill DeShivs, Master Cutler
Factory authorized repair for:
Latama
Mauro Mario
LePre
Colonial
KABAR
Hubertus, Grafrath, Ritter
Schrade Cut. Co., Geo Schrade, Pressbutton, Flylock
Falcon/AKC/AGA Campolin
Puma
Burrell Cutlery
Factory authorized repair for:
Latama
Mauro Mario
LePre
Colonial
KABAR
Hubertus, Grafrath, Ritter
Schrade Cut. Co., Geo Schrade, Pressbutton, Flylock
Falcon/AKC/AGA Campolin
Puma
Burrell Cutlery
Re: No one will build one for me!
I don't know how to contact Jeremy Kreis. I'll try to reach Pat Havlin.
- Bill DeShivs
- Posts: 708
- Joined: Sun Oct 07, 2012 4:57 am
- Contact:
Re: No one will build one for me!
Bill DeShivs, Master Cutler
Factory authorized repair for:
Latama
Mauro Mario
LePre
Colonial
KABAR
Hubertus, Grafrath, Ritter
Schrade Cut. Co., Geo Schrade, Pressbutton, Flylock
Falcon/AKC/AGA Campolin
Puma
Burrell Cutlery
Factory authorized repair for:
Latama
Mauro Mario
LePre
Colonial
KABAR
Hubertus, Grafrath, Ritter
Schrade Cut. Co., Geo Schrade, Pressbutton, Flylock
Falcon/AKC/AGA Campolin
Puma
Burrell Cutlery
Re: No one will build one for me!
Looks like Jeremy was here in 2017: viewtopic.php?t=54604
Try emailing him through AAPK, maybe it’s his current email address
Try emailing him through AAPK, maybe it’s his current email address
Tom
AAPK Administrator
Live simply. Love generously. Care deeply. Speak kindly. Leave the rest to God.
AAPK Administrator
Live simply. Love generously. Care deeply. Speak kindly. Leave the rest to God.
Re: No one will build one for me!
I am and have been visiting a friend 32 miles from my place and have had no steady access to the internet for months. This caused me to lose my access to Talk Blade. It has been a real problem.
C'est la vie.
C'est la vie.
- Bill DeShivs
- Posts: 708
- Joined: Sun Oct 07, 2012 4:57 am
- Contact:
Re: No one will build one for me!
Bill DeShivs, Master Cutler
Factory authorized repair for:
Latama
Mauro Mario
LePre
Colonial
KABAR
Hubertus, Grafrath, Ritter
Schrade Cut. Co., Geo Schrade, Pressbutton, Flylock
Falcon/AKC/AGA Campolin
Puma
Burrell Cutlery
Factory authorized repair for:
Latama
Mauro Mario
LePre
Colonial
KABAR
Hubertus, Grafrath, Ritter
Schrade Cut. Co., Geo Schrade, Pressbutton, Flylock
Falcon/AKC/AGA Campolin
Puma
Burrell Cutlery
Re: No one will build one for me!
Thanks, Bill. I sent him an email that finally went through.
Re: No one will build one for me!
I sent Jeremy a picture of the 9.75" Fishtail Picklock (sold by Grindworx) of which I own an example. I old him of how this needs to be a "working" automatic knife and not a display piece. Modern materials and proper engineering can resolve the shortcomings of the original carbon steel (1095) version that father bought 82 years ago. The Brazilian Cow Horn scales should hold up quite well. If this material is less than practical, I could have him use a "marbled" version of Micarta.
https://www.grindworx.com/imgs/knives/i ... -large.jpg
Who knows?
https://www.grindworx.com/imgs/knives/i ... -large.jpg
Who knows?
Re: No one will build one for me!
Did you offer $1800 for the build? That would get my attention if I could do the work!
Re: No one will build one for me!
After some thought, $1600.00 is more in line with the cost of labor and materials.
Re: No one will build one for me!
Good news! I have almost reached an agreement with Jeremy Kreis to recreate my father's original 10.75" Latama Fishtail Picklock It will have a 4mm thick blade, nickel silver hardware and a 1095 satin finish blade and back spring. It will be a exact duplicate of my late father's knife (complete with the original clip point blade).
I have been waiting 45 years for this opportunity!
Huzzah and excelsior!
I have been waiting 45 years for this opportunity!
Huzzah and excelsior!
Re: No one will build one for me!
Jeremy said that he would begin building my knife by August 14th.
The wait begins.
The wait begins.
- WillyCamaro
- Posts: 6097
- Joined: Thu Jan 10, 2019 4:03 am
Re: No one will build one for me!
Congrats Captain, can't wait to see the finished product .
"Never, never, never give up."
Winston Churchill
Take therefore no thought for the morrow: for the morrow shall take thought for the things of itself. Sufficient unto the day is the evil thereof.
Matthew 6:34
Winston Churchill
Take therefore no thought for the morrow: for the morrow shall take thought for the things of itself. Sufficient unto the day is the evil thereof.
Matthew 6:34
Re: No one will build one for me!
I have the finished product but can't post pictures. (Before you ask, I have no way of posting any).
Re: No one will build one for me!
Perhaps Jeremy could post them for you , congrats!
- WillyCamaro
- Posts: 6097
- Joined: Thu Jan 10, 2019 4:03 am
Re: No one will build one for me!
Well done mate, put a great feather in your cap .
Do you have a laptop pc? You can, if your fine with doing it, take a picture with it's screen camera.
Do you have a laptop pc? You can, if your fine with doing it, take a picture with it's screen camera.
"Never, never, never give up."
Winston Churchill
Take therefore no thought for the morrow: for the morrow shall take thought for the things of itself. Sufficient unto the day is the evil thereof.
Matthew 6:34
Winston Churchill
Take therefore no thought for the morrow: for the morrow shall take thought for the things of itself. Sufficient unto the day is the evil thereof.
Matthew 6:34
Re: No one will build one for me!
Go to the Talkblade Forum and read the thread by the same name. Jeremy posted pictures on page 4 of the thread.