Does Anyone EDC a Kershaw or two?
Does Anyone EDC a Kershaw or two?
I have been hooked on Kershaw's since I managed to cutlery store in the 1980s. As a matter of fact we have a few in the smoke shop before we set the cutlery store up and I think that was where I got hooked. While Turkey was the one that may me A full on Kershaw addict, Followed by the Leek, The Blur, and some of their high-tech versions.
Here are some that I EDC. I almost always have at least one Kershaw on me at all times simply because it's a tool I use in my shop on a daily basis. When I first was introduced to Kershaw Pete still on the company and Kai made the knives. Then Kai bought the company and Pete Kershaw ran the company. About that time, they moved from Lake Oswego to Wilsonville Oregon and a short while later from Wilsonville to Tualatin Oregon, where their US factory is located today.
By no means is this all the Kershaw's I own these are just the ones that I keep in a drawer so I can grab them quickly if I decide I want a different knife for the day. The drawer also contains several Benchmade, Al Mar knives and a lot of old slip joints.
These are the majority of my EDC Kershaws.
I hope you enjoy the pictures and post your EDC Kershaw's!
Here are some that I EDC. I almost always have at least one Kershaw on me at all times simply because it's a tool I use in my shop on a daily basis. When I first was introduced to Kershaw Pete still on the company and Kai made the knives. Then Kai bought the company and Pete Kershaw ran the company. About that time, they moved from Lake Oswego to Wilsonville Oregon and a short while later from Wilsonville to Tualatin Oregon, where their US factory is located today.
By no means is this all the Kershaw's I own these are just the ones that I keep in a drawer so I can grab them quickly if I decide I want a different knife for the day. The drawer also contains several Benchmade, Al Mar knives and a lot of old slip joints.
These are the majority of my EDC Kershaws.
I hope you enjoy the pictures and post your EDC Kershaw's!
Dale
AAPK Administrator
Please visit my AAPK store: www.allaboutpocketknives.com/orvet
Job 13:15
"Buy more ammo!" - Johnnie Fain
“Evil is Powerless If The Good are Unafraid.” – Ronald Reagan
AAPK Administrator
Please visit my AAPK store: www.allaboutpocketknives.com/orvet
Job 13:15
"Buy more ammo!" - Johnnie Fain
“Evil is Powerless If The Good are Unafraid.” – Ronald Reagan
- Quick Steel
- Bronze Tier
- Posts: 16974
- Joined: Thu Dec 16, 2010 5:39 pm
- Location: Lebanon, KY
Re: Does Anyone EDC a Kershaw or two?
Dale, you are showing a lot of brand loyalty. My two favorite Kershaws are in the second picture from the top; the two that you modified. Those are exceptionally good looking knives.
Re: Does Anyone EDC a Kershaw or two?
I don't have a lot of Kershaw's but this one is one of my favorites to carry.
They call it a Culpepper Jackknife. Stainless Steel blade and G-10 handles.
They call it a Culpepper Jackknife. Stainless Steel blade and G-10 handles.
David L Roberts, United States Navy Retired
Please visit my website: Woodburning Art by David at
https://www.wdbydavid.com/
Please visit my website: Woodburning Art by David at
https://www.wdbydavid.com/
Re: Does Anyone EDC a Kershaw or two?
My EDC is a Rexford design...3871?. In my better go to town pants is a Leek. Both brothers and 1 son also EDC a Leek. Damn good pieces. They are pocketed just below the S&W Shield.
Re: Does Anyone EDC a Kershaw or two?
I carried a LEEK for many years but for the last 6 or so years it's been a Chill
I also really like these two: Wild Turkey & Big Joe with smooth white bone
I also really like these two: Wild Turkey & Big Joe with smooth white bone
~Q~
- Madmarco
- Gold Tier
- Posts: 9806
- Joined: Wed May 20, 2020 12:09 am
- Location: Smack dab in the middle of Canada
Re: Does Anyone EDC a Kershaw or two?
I don't actually carry a knife on a daily basis Dale, but I'm looking at an all-metal Wild Turkey on ebay for $115. to add to my collection, is that a decent price? Thx!orvet wrote: ↑Fri Dec 31, 2021 8:05 am I have been hooked on Kershaw's since I managed to cutlery store in the 1980s. As a matter of fact we have a few in the smoke shop before we set the cutlery store up and I think that was where I got hooked. While Turkey was the one that may me A full on Kershaw addict, Followed by the Leek, The Blur, and some of their high-tech versions.
Here are some that I EDC. I almost always have at least one Kershaw on me at all times simply because it's a tool I use in my shop on a daily basis. When I first was introduced to Kershaw Pete still on the company and Kai made the knives. Then Kai bought the company and Pete Kershaw ran the company. About that time, they moved from Lake Oswego to Wilsonville Oregon and a short while later from Wilsonville to Tualatin Oregon, where their US factory is located today.
By no means is this all the Kershaw's I own these are just the ones that I keep in a drawer so I can grab them quickly if I decide I want a different knife for the day. The drawer also contains several Benchmade, Al Mar knives and a lot of old slip joints.
These are the majority of my EDC Kershaws.
Kershaw EDCs -1.jpg
Kershaw EDCs - 2.jpg
Kershaw Big Joe EDC.jpg
Kershaw Money Clips.jpg
I hope you enjoy the pictures and post your EDC Kershaw's!
Re: Does Anyone EDC a Kershaw or two?
I have several Kershaw's, all SpeedSafe.
I should take pictures of that herd .....
I should take pictures of that herd .....
Chris
i woke last night to the sound of thunder
how far off i sat and wondered
started humming a song from nineteen sixty two
aint it funny how the night moves
i woke last night to the sound of thunder
how far off i sat and wondered
started humming a song from nineteen sixty two
aint it funny how the night moves
Re: Does Anyone EDC a Kershaw or two?
I have these 3 small knives.
Scallion USA Made
Chive USA Made
2410 Japan.
Scallion USA Made
Chive USA Made
2410 Japan.
Re: Does Anyone EDC a Kershaw or two?
I would say so, I think it is about as low as I have seen the price on one and not necessarily a new one either.
IIRC, I have seen them NIB for $150.
Dale
AAPK Administrator
Please visit my AAPK store: www.allaboutpocketknives.com/orvet
Job 13:15
"Buy more ammo!" - Johnnie Fain
“Evil is Powerless If The Good are Unafraid.” – Ronald Reagan
AAPK Administrator
Please visit my AAPK store: www.allaboutpocketknives.com/orvet
Job 13:15
"Buy more ammo!" - Johnnie Fain
“Evil is Powerless If The Good are Unafraid.” – Ronald Reagan
- Madmarco
- Gold Tier
- Posts: 9806
- Joined: Wed May 20, 2020 12:09 am
- Location: Smack dab in the middle of Canada
Re: Does Anyone EDC a Kershaw or two?
Thank you for that info Dale! This is a used one, but appears to be in perfect condition. Think I'll pull the trigger! HNY!
Re: Does Anyone EDC a Kershaw or two?
I found some more Kershaw's that I use, though the first knife in the top picture Is a backup spare in case one of my other Tonto Blurs malfunction.
The bottom one in that picture is a Wild Turkey with the Damascus blade. Absolutely a favorite, I wish Kershaw made more Damascus steel!
The large knife in the bottom picture is a Zero Tolerance by Kershaw. Great knife, very smooth, very bulky and heavy.
The bottom one in that picture is a Wild Turkey with the Damascus blade. Absolutely a favorite, I wish Kershaw made more Damascus steel!
The large knife in the bottom picture is a Zero Tolerance by Kershaw. Great knife, very smooth, very bulky and heavy.
Dale
AAPK Administrator
Please visit my AAPK store: www.allaboutpocketknives.com/orvet
Job 13:15
"Buy more ammo!" - Johnnie Fain
“Evil is Powerless If The Good are Unafraid.” – Ronald Reagan
AAPK Administrator
Please visit my AAPK store: www.allaboutpocketknives.com/orvet
Job 13:15
"Buy more ammo!" - Johnnie Fain
“Evil is Powerless If The Good are Unafraid.” – Ronald Reagan
- Madmarco
- Gold Tier
- Posts: 9806
- Joined: Wed May 20, 2020 12:09 am
- Location: Smack dab in the middle of Canada
Re: Does Anyone EDC a Kershaw or two?
Great group of knives Dale!orvet wrote: ↑Fri Jan 14, 2022 11:15 pm I found some more Kershaw's that I use, though the first knife in the top picture Is a backup spare in case one of my other Tonto Blurs malfunction.
The bottom one in that picture is a Wild Turkey with the Damascus blade. Absolutely a favorite, I wish Kershaw made more Damascus steel!
The large knife in the bottom picture is a Zero Tolerance by Kershaw. Great knife, very smooth, very bulky and heavy.
- WillyCamaro
- Posts: 6097
- Joined: Thu Jan 10, 2019 4:03 am
Re: Does Anyone EDC a Kershaw or two?
Very nice collection brother!
Kershaw sure has made awesome knives over the years, & then add the whole ZT side of things.
Finally took the plunge on the OD Green Natrix, on sale for 40% off. 10-buck shipping all the way for Vancouver, not bad IMB.
Kershaw sure has made awesome knives over the years, & then add the whole ZT side of things.
Finally took the plunge on the OD Green Natrix, on sale for 40% off. 10-buck shipping all the way for Vancouver, not bad IMB.
"Never, never, never give up."
Winston Churchill
Take therefore no thought for the morrow: for the morrow shall take thought for the things of itself. Sufficient unto the day is the evil thereof.
Matthew 6:34
Winston Churchill
Take therefore no thought for the morrow: for the morrow shall take thought for the things of itself. Sufficient unto the day is the evil thereof.
Matthew 6:34
Re: Does Anyone EDC a Kershaw or two?
My Kershaw Fiber
- WillyCamaro
- Posts: 6097
- Joined: Thu Jan 10, 2019 4:03 am
Re: Does Anyone EDC a Kershaw or two?
Very nice Jack! I really like the design of the Fiber...
"Never, never, never give up."
Winston Churchill
Take therefore no thought for the morrow: for the morrow shall take thought for the things of itself. Sufficient unto the day is the evil thereof.
Matthew 6:34
Winston Churchill
Take therefore no thought for the morrow: for the morrow shall take thought for the things of itself. Sufficient unto the day is the evil thereof.
Matthew 6:34
Re: Does Anyone EDC a Kershaw or two?
Yes!
Please visit my AAPK store: https://www.allaboutpocketknives.com/ca ... er_id=2383
They say, “Hard work never hurt anyone”, but I'm still not willing to risk it.
They say, “Hard work never hurt anyone”, but I'm still not willing to risk it.
- 1967redrider
- Gold Tier
- Posts: 16224
- Joined: Wed Feb 02, 2011 4:23 pm
- Location: Alexandria, VA
- Contact:
Re: Does Anyone EDC a Kershaw or two?
Sweet USA made Kershaw, GSP.
Pocket, fixed, machete, axe, it's all good!
You're going to look awfully silly with that knife sticking out of your @#$. -Clint Eastwood, High Plains Drifter
You're going to look awfully silly with that knife sticking out of your @#$. -Clint Eastwood, High Plains Drifter
- WillyCamaro
- Posts: 6097
- Joined: Thu Jan 10, 2019 4:03 am
Re: Does Anyone EDC a Kershaw or two?
That's a good 'un!
"Never, never, never give up."
Winston Churchill
Take therefore no thought for the morrow: for the morrow shall take thought for the things of itself. Sufficient unto the day is the evil thereof.
Matthew 6:34
Winston Churchill
Take therefore no thought for the morrow: for the morrow shall take thought for the things of itself. Sufficient unto the day is the evil thereof.
Matthew 6:34
Re: Does Anyone EDC a Kershaw or two?
Most of my Kershaws had messes of blade grinds, and I had Kershaw rework them.
These are the three I carry at present.
Scallion--general EDC. No bigger or smaller than I need, and opens in a flash. The tip lock means it won't open in my pocket.
Delly Wade Officer, secondary carry/around the house. Small, fairly light, and sharp.
Good Buddy. A recent purchase for peanuts, I fell in love with its ergonomics and blade selection for a sub-three-inch knife. Like the DWO, it excels at being both a light-duty EDC and a secondary carry to a larger knife.
I really like the Good Buddy's blade selection, but I'd prefer the blade layout of Dale's knife with the same two blades, but opening from different sides of the knife, and with a straighter frame. The curved frame is really weird when I'm trying to turn a screw with it.
A-100--farm/DIY/work. Locking pliers, an outside accessible blade, a file, hacksaw, and a decent assortment of screwdrivers, it gets the job done alongside a Swiss Army pattern and regular pliers.
I chose this one over the Leatherman Crunch and Schrade/Vise Grip collaborations. The A-100 has a lock release for the pliers, and has decent drivers. I don't have to assemble it either, like the Crunch. The Tough Tool has really bad screwdrivers, and I knew the Tough Grips had the same drivers.
They are often hard to find and expensive. I spent just under $100 on a lo of four broken ones. I swapped parts to get two good tools, and then traded the leftover parts. The second tool was given to a mechanic buddy of mine who keeps it in his truck.
And last, but not least, the Funxion EMT--a dirty work beater. It's a Chinese-made model, something I tend to avoid, but it's taken a beating. Normally, it isn't a knife I'd buy, but a member on the store had listed the Funxion and a Buck 379 for a dollar each as an introductory deal, and I bought both (for the grand total of under $10 with shipping). The blade is a semi-sheepsfoot partially serrated design that works well. It also has a seatbelt cutter blade, which I use for cutting baler twine.
This version was a lot cheaper than the normal one--which has aluminum handles (with rubber inserts) and an 8Cr blade. This version is 3Cr and has plastic handles. It was a Walmart exclusive.
These are the three I carry at present.
Scallion--general EDC. No bigger or smaller than I need, and opens in a flash. The tip lock means it won't open in my pocket.
Delly Wade Officer, secondary carry/around the house. Small, fairly light, and sharp.
Good Buddy. A recent purchase for peanuts, I fell in love with its ergonomics and blade selection for a sub-three-inch knife. Like the DWO, it excels at being both a light-duty EDC and a secondary carry to a larger knife.
I really like the Good Buddy's blade selection, but I'd prefer the blade layout of Dale's knife with the same two blades, but opening from different sides of the knife, and with a straighter frame. The curved frame is really weird when I'm trying to turn a screw with it.
A-100--farm/DIY/work. Locking pliers, an outside accessible blade, a file, hacksaw, and a decent assortment of screwdrivers, it gets the job done alongside a Swiss Army pattern and regular pliers.
I chose this one over the Leatherman Crunch and Schrade/Vise Grip collaborations. The A-100 has a lock release for the pliers, and has decent drivers. I don't have to assemble it either, like the Crunch. The Tough Tool has really bad screwdrivers, and I knew the Tough Grips had the same drivers.
They are often hard to find and expensive. I spent just under $100 on a lo of four broken ones. I swapped parts to get two good tools, and then traded the leftover parts. The second tool was given to a mechanic buddy of mine who keeps it in his truck.
And last, but not least, the Funxion EMT--a dirty work beater. It's a Chinese-made model, something I tend to avoid, but it's taken a beating. Normally, it isn't a knife I'd buy, but a member on the store had listed the Funxion and a Buck 379 for a dollar each as an introductory deal, and I bought both (for the grand total of under $10 with shipping). The blade is a semi-sheepsfoot partially serrated design that works well. It also has a seatbelt cutter blade, which I use for cutting baler twine.
This version was a lot cheaper than the normal one--which has aluminum handles (with rubber inserts) and an 8Cr blade. This version is 3Cr and has plastic handles. It was a Walmart exclusive.