Patina on my Gerber
Patina on my Gerber
I'm not sure which model Gerber my knife is, but I do like it a lot. I got it new in the late 70's.
Usually though, when I take it out of the leather case it has patina on the brass.
Wiping it down takes care of it.
But, is there a proper way to prevent patina, or do I need to wipe it down every few months as a patina prevention routine?
You can just see the beginnings of the green deposit in this photo.
Usually though, when I take it out of the leather case it has patina on the brass.
Wiping it down takes care of it.
But, is there a proper way to prevent patina, or do I need to wipe it down every few months as a patina prevention routine?
You can just see the beginnings of the green deposit in this photo.
- Steve Warden
- Posts: 6320
- Joined: Wed May 27, 2015 4:18 pm
- Location: Cherry Hill, NJ
Re: Patina on my Gerber
First) Welcome.
B) I've heard leather may not be the best for long term storage
3) I've been wrong before
B) I've heard leather may not be the best for long term storage
3) I've been wrong before
Take care and God bless,
Steve
TSgt USAF, Retired
1980-2000
But any knife is better than no knife! ~ Mumbleypeg (aka Ken)
Steve
TSgt USAF, Retired
1980-2000
But any knife is better than no knife! ~ Mumbleypeg (aka Ken)
Re: Patina on my Gerber
I always thought brass naturally gets a patina with time.
I wonder if Renaissance Wax would provide a barrier, therefore
holding down the patina development.
Bob
I wonder if Renaissance Wax would provide a barrier, therefore
holding down the patina development.
Bob
Re: Patina on my Gerber
The green stuff is called verdigris. Its harmless just wipe it off. Store the knife outside of the sheath. Do you happen to use mink oil on your leather? My dad did and his knives seem to grow more verdigris in storage than mine do.
- XX Case XX
- Posts: 3574
- Joined: Sat Oct 31, 2015 7:24 pm
- Location: California
Re: Patina on my Gerber
I completely agree. I took mine out of their leather cases long ago. You have to keep brass clean and wipe them down every so often or that green stuff comes back. I don't even store my fixed blades in their leather sheaths just in case.Steve Warden wrote: I've heard leather may not be the best for long term storage
___________
Mike
"If there are no Dogs in Heaven, then when I die, I want to go where they went". Will Rogers
I work hard so my Dog can have a better life...
I work hard so my Dog can have a better life...
-
- Posts: 391
- Joined: Fri Jan 16, 2015 6:20 pm
Re: Patina on my Gerber
I have used plastic wrap on the brass guards, etc of my fixed blades that are stored in a leather sheath. Helps, but even then, the green stuff creeps in. So even without direct brass/leather contact, it still forms.
-
- Posts: 24
- Joined: Tue Sep 12, 2017 1:18 am
Re: Patina on my Gerber
Leather contains Tannic acid which when contacted to brass will produce the green patina. I would recommend long term storage for knives in a padded zipper case. Even with that, brass will need to be periodically polished. I use Semichrome or Flitz polish.
Re: Patina on my Gerber
Yes, Verdigris.eveled wrote:The green stuff is called verdigris. Its harmless just wipe it off. Store the knife outside of the sheath. Do you happen to use mink oil on your leather? My dad did and his knives seem to grow more verdigris in storage than mine do.
That's the correct name.
https://www.google.com/search?q=verdigr ... irefox-b-1
Re: Patina on my Gerber
But, it sounds like the answer is to store it out of the case. Or, remove it from the case now and then to wipe it down, perhaps?
Re: Patina on my Gerber
It's still gonna go green.
I store all my knives that have leather sheaths wrapped in either Saran wrap or sandwich baggies to keep the bad leather rustmonster away. (With a little 3n1)
Haven't had a problem yet.
Haven't heard that about mink oil. My dad put it on his (and my) baseball gloves when I was kidding (he played a couple of years on a little minor league farm team). Always love the smell. Still use it on most everything I've got that's leather (sheaths to work boots).
The Ides of March!!!
Not a bad day, unless you're Caeser.
ET TU BRUTE!!
I store all my knives that have leather sheaths wrapped in either Saran wrap or sandwich baggies to keep the bad leather rustmonster away. (With a little 3n1)
Haven't had a problem yet.
Haven't heard that about mink oil. My dad put it on his (and my) baseball gloves when I was kidding (he played a couple of years on a little minor league farm team). Always love the smell. Still use it on most everything I've got that's leather (sheaths to work boots).
The Ides of March!!!
Not a bad day, unless you're Caeser.
ET TU BRUTE!!
My name is Mud,
But call me Alowishus Devadander Abercrombie
That's long for Mud, so I've been told
But call me Alowishus Devadander Abercrombie
That's long for Mud, so I've been told
Re: Patina on my Gerber
Brass bolsters stored in a sheath will definitely promote verdigris. If left long enough, the verdigris will actually etch the brass.
A while back, I bought some Vapor Phase Corrosion Inhibiting plastic zipper bags. VCPI or even VCI for short. They are available in many sizes. They are used for long term storage of metal parts and pieces. The ones I bought are sized such that most of my folding hunters with brass bolsters (Camillus, Buck, Schrade, Case Shark Series, etc.) can be dropped inside, zipped closed, and THEN put in the sheath. The bags provide an effective barrier between the leather and the knife. And, the VPCI properties of the bag's interior provides added corrosion protection for the knife in general. When purchased in bulk, the cost of the bags can be as low as $0.03 - $0.05 each. I went in with several other collectors and we bought a case to bring the cost down. I also obtained some larger ones that are great for items like handguns.
They also make VCPI/VCI paper too. In fact, that is what Bear & Son wraps their knives in from the factory.
A while back, I bought some Vapor Phase Corrosion Inhibiting plastic zipper bags. VCPI or even VCI for short. They are available in many sizes. They are used for long term storage of metal parts and pieces. The ones I bought are sized such that most of my folding hunters with brass bolsters (Camillus, Buck, Schrade, Case Shark Series, etc.) can be dropped inside, zipped closed, and THEN put in the sheath. The bags provide an effective barrier between the leather and the knife. And, the VPCI properties of the bag's interior provides added corrosion protection for the knife in general. When purchased in bulk, the cost of the bags can be as low as $0.03 - $0.05 each. I went in with several other collectors and we bought a case to bring the cost down. I also obtained some larger ones that are great for items like handguns.
They also make VCPI/VCI paper too. In fact, that is what Bear & Son wraps their knives in from the factory.
Gary
"Now it cuts like a knife, but it feels so right." Bryan Adams
"Now it cuts like a knife, but it feels so right." Bryan Adams
Re: Patina on my Gerber
Thank you. Didn't know about VCPI.
I'm gonna have to check into that.
I'm gonna have to check into that.
My name is Mud,
But call me Alowishus Devadander Abercrombie
That's long for Mud, so I've been told
But call me Alowishus Devadander Abercrombie
That's long for Mud, so I've been told
Re: Patina on my Gerber
On all my knives with brass bolsters & liners, about once a year or so I give them a good polish with either Brasso or Mother's Mag Polish. Keeps the brass looking nice and keeps the verdigris at bay. I don't really like the look of dull patina on brass.
Perception is Reality