Old Keen Kutter Knives

Keen Kutter was first used as a knife brand by Simmons Hardware Company in 1870. The trademark was used on the highest quality tools and cutlery Simmons offered.
knife-nut
Posts: 1427
Joined: Fri Jun 30, 2006 2:09 am
Location: Wichita, Kansas

Re: Old Keen Kutter Knives

Post by knife-nut »

Jacknifeben wrote:Try again.
Keen kutter made this as a postcard. If it is a poster it is a fantasy item. Someone made quite a few of them and sold them as the real thing.
User avatar
FRJ
Posts: 15174
Joined: Fri May 14, 2010 1:43 pm
Location: Ct.

Re: Old Keen Kutter Knives

Post by FRJ »

Nice knives, Jason and ITSAKILLER.

Here's an old toothpick. Made by New York Knife, I'm thinkin'.
Attachments
DSCN2555.JPG
DSCN2559.JPG
DSCN2563.JPG
DSCN2568.JPG
Joe
User avatar
peanut740
Gold Tier
Gold Tier
Posts: 7575
Joined: Fri Jan 23, 2009 2:32 pm
Location: Ohio, along the river
Contact:

Re: Old Keen Kutter Knives

Post by peanut740 »

Joe,I believe that is a post 1940 tang stamp and New York Knife would have been out of business.I think Schrade.Nice knife whoever made it. ::tu::
Roger
User avatar
FRJ
Posts: 15174
Joined: Fri May 14, 2010 1:43 pm
Location: Ct.

Re: Old Keen Kutter Knives

Post by FRJ »

Thank you for that, Roger, I appreciate it.
I should have done a little more home work. But I am constantly confused with identifying makers.
Rarely do I get it right.
Thanks again.
Joe
User avatar
danno50
Gold Tier
Gold Tier
Posts: 3657
Joined: Mon Jan 12, 2009 12:05 am
Location: Saskatchewan, Canada

Re: Old Keen Kutter Knives

Post by danno50 »

Beautiful old knife, ITSAKILLER! ::tu:: Looks like a K3052 to me, should be 3 1/8". Is there a pattern number on the back of the master blade?
Very nice toothpick, Joe! ::tu:: I would agree with Roger on Schrade made.
Dan
User avatar
FRJ
Posts: 15174
Joined: Fri May 14, 2010 1:43 pm
Location: Ct.

Re: Old Keen Kutter Knives

Post by FRJ »

Thank you, Dan. ::tu::
Joe
User avatar
jxr1197
Posts: 963
Joined: Mon Nov 13, 2017 3:47 am

Re: Old Keen Kutter Knives

Post by jxr1197 »

Sweet toothpick Joe!
This cattle knife showed up a few days ago as the mystery component in a bundle. The seller couldn't identify it for good reason. Even though it's in decent shape the tangs are just all pitted to hell. After a little clean up and with good lighting the Keen Kutter logos are visible but I can't tell if it has ears (I think it doesn't) and I can't tell whether it's got 'Simmons' on it. The pattern number is probably K7387?-3/4 and it's 3-5/8" closed without any brass - liners, pins - all of it is NS. It doesn't look Schrade to me and I don't think it's a Camillus. I'm wondering if it could be a Winchester?
open.jpg
mark.jpg
pile.jpg
- Jason
User avatar
danno50
Gold Tier
Gold Tier
Posts: 3657
Joined: Mon Jan 12, 2009 12:05 am
Location: Saskatchewan, Canada

Re: Old Keen Kutter Knives

Post by danno50 »

Nice old knife, Jason. It could also be made by Walden. Is there any trace of a stamped pattern number on the back of the main blade?
Dan
User avatar
jxr1197
Posts: 963
Joined: Mon Nov 13, 2017 3:47 am

Re: Old Keen Kutter Knives

Post by jxr1197 »

danno50 wrote:Nice old knife, Jason. It could also be made by Walden. Is there any trace of a stamped pattern number on the back of the main blade?
Thanks Dan. It's tough to see but definitely there. K7387?-3/4. The last digit is unreadable and that 8 is questionable too. Could also be a 6 or a 3 or on a stretch maybe even a 5. The closest patterns are on page 201 (Sellens) but nothing exact.
- Jason
User avatar
danno50
Gold Tier
Gold Tier
Posts: 3657
Joined: Mon Jan 12, 2009 12:05 am
Location: Saskatchewan, Canada

Re: Old Keen Kutter Knives

Post by danno50 »

A stamped pattern number, preceded by K, is an indication of Camillus manufacture. In my opinion, with the stamped pattern number, it is not Walden made. There are distinct differences in the spey blade shape between Camillus and Winchester made knives. However, the spey on yours is down considerably and I can't say. There is another member, msteele6, with a lot better feel for the differences between Camillus and Winchester Keen Kutters. Hopefully he comes by and offers his opinion.
Dan
User avatar
jxr1197
Posts: 963
Joined: Mon Nov 13, 2017 3:47 am

Re: Old Keen Kutter Knives

Post by jxr1197 »

Here's a tighter shot on the spey. I recall reading about the 'K' pointing to Camillus but I don't remember if it's an exclusive marking. What made me think it wasn't Camillus were the punch and the nail nick on the spear. Full disclosure - I'm likely to be wrong, lol. Thanks for looking.
spey.jpg
- Jason
User avatar
danno50
Gold Tier
Gold Tier
Posts: 3657
Joined: Mon Jan 12, 2009 12:05 am
Location: Saskatchewan, Canada

Re: Old Keen Kutter Knives

Post by danno50 »

Jason, if you look at the 6th post on page 23 of this thread, it gives some additional information on telling the difference between Winchester and Camillus knives. In particular, there is a description and references to posts depicting the differences in the spey blades. The spey blade on yours is worn down considerably? The referenced post also mentions ringed bolsters as being more indicative of Camillus manufacture, as opposed to Winchester.
Dan
msteele6
Posts: 1963
Joined: Tue Jun 19, 2007 8:29 pm
Location: Houston, TX

Re: Old Keen Kutter Knives

Post by msteele6 »

Knife appears to be a 73878 3/4 shown on p. 202 of Sellens.

I would say that the knife is a Camillus made knife based on the following, first the "K" in the pattern number, I generally only see that on Camillus made knives. I assume that the "K" is underlined. The grooved bolsters are common on Camillus knives, however, I haven't really seen it very often on Winchester or Walden knives. The Keen Kutter logo should have the little ears at the top of the wedge, if they aren't there I'd be surprised. Finally, the shield shown in Sellens is the old logo shield, however, if you look at Sellen's dates they are 1921 through 1938. At the beginning of that period the knife would have been a Walden knife, at the end a Camillus. This knife is a later version in my opinion. Camillus made knives both with and without the "Simmons" on the logo.

I can't see anything about the punch that sounds any alarms.

JMO
User avatar
edge213
Gold Tier
Gold Tier
Posts: 7763
Joined: Sat Jan 25, 2014 12:48 am
Location: The Crossroads of America

Re: Old Keen Kutter Knives

Post by edge213 »

Latest KK Barlow
Attachments
20180726_175949(0).jpg
David
"Glowing like the metal on the edge of a knife" Meat Loaf
User avatar
jxr1197
Posts: 963
Joined: Mon Nov 13, 2017 3:47 am

Re: Old Keen Kutter Knives

Post by jxr1197 »

It looks like most signs are pointing to Camillus on that cattle knife - thanks Dan and msteele ::tu::

Here's another, and this one's easy - it's an Ulster! Not in Sellens book but the pattern dates to 1960-1966.
K58OT.jpg
- Jason
User avatar
jxr1197
Posts: 963
Joined: Mon Nov 13, 2017 3:47 am

Re: Old Keen Kutter Knives

Post by jxr1197 »

I picked up another Ulster Keen Kutter. This is an 834 and sadly some ding dong along the way nearly cleaned the etch off. It can be seen at the right angle but the camera doesn't catch it well. Just like the K58OT above, this one has no tang stamp. It's likely made around the same time. That turkish clip makes it a 1960+ knife.
keenkutter834.jpg
- Jason
User avatar
jxr1197
Posts: 963
Joined: Mon Nov 13, 2017 3:47 am

Re: Old Keen Kutter Knives

Post by jxr1197 »

Keen Kutter 883. It's not in Sellens but it's identical to the KS835RB on page 157.
883.jpg
835.jpg
- Jason
User avatar
jxr1197
Posts: 963
Joined: Mon Nov 13, 2017 3:47 am

Re: Old Keen Kutter Knives

Post by jxr1197 »

I'm wondering if someone on here might know if this is a Winchester or maybe a Camillus? There's no pattern number and the closed length is 3.5". The shape of the clip is distinct so hopefully this one's easy to ID. Thanks for any input.
markandpile.JPG
open.jpg
tang.jpg
- Jason
User avatar
FRJ
Posts: 15174
Joined: Fri May 14, 2010 1:43 pm
Location: Ct.

Re: Old Keen Kutter Knives

Post by FRJ »

Here's a nice old knife that apparently has been recovered.
Sellens book says this should have Celluloid covers.
As it is, it has cracked jigged bone with a patch, thank you very much.
I love the spiral and those blades. And the pattern. And the stamp. And the nickel silver liners.
3 5/8" closed.
Attachments
DSCN3033.JPG
DSCN3035.JPG
DSCN3038.JPG
DSCN3039.JPG
DSCN3042.JPG
DSCN3048.JPG
DSCN3055.JPG
DSCN3061.JPG
Joe
User avatar
danno50
Gold Tier
Gold Tier
Posts: 3657
Joined: Mon Jan 12, 2009 12:05 am
Location: Saskatchewan, Canada

Re: Old Keen Kutter Knives

Post by danno50 »

Nice knives Jason and Joe! Joe, the handle replacement looks like it was well done quite some time ago. With fairly full blades and that spiral punch it is a nice old knife.
Jason, Sharpshinyknives has one just like the one in your last post in his AAPK store. It is a very distinctive clip blade. I am at a loss on it as to where it fits in. The tang stamps, on yours and on the one in the AAPK store, do not look quite right for old Simmons era Keen Kutters. I would not be surprised if they were more recent remakes, possibly in the 60s by Val-Test Distributors??
Dan
User avatar
FRJ
Posts: 15174
Joined: Fri May 14, 2010 1:43 pm
Location: Ct.

Re: Old Keen Kutter Knives

Post by FRJ »

Thank you, Dan.
Yes, the covers have been on there a while.
Some one cared for this knife and rightly so.
Joe
User avatar
jxr1197
Posts: 963
Joined: Mon Nov 13, 2017 3:47 am

Re: Old Keen Kutter Knives

Post by jxr1197 »

danno50 wrote:Nice knives Jason and Joe! Joe, the handle replacement looks like it was well done quite some time ago. With fairly full blades and that spiral punch it is a nice old knife.
Jason, Sharpshinyknives has one just like the one in your last post in his AAPK store. It is a very distinctive clip blade. I am at a loss on it as to where it fits in. The tang stamps, on yours and on the one in the AAPK store, do not look quite right for old Simmons era Keen Kutters. I would not be surprised if they were more recent remakes, possibly in the 60s by Val-Test Distributors??
Thanks for the info Dan, I hadn't even thought of Val-Test because honestly I didn't know they owned the rights to Simmons tang stamps - that just adds a whole new layer of confusion to Keen Kutter knives. BTW I bought this one from sharpshinyknives on ebay - I hadn't seen the other one here.
- Jason
msteele6
Posts: 1963
Joined: Tue Jun 19, 2007 8:29 pm
Location: Houston, TX

Re: Old Keen Kutter Knives

Post by msteele6 »

I've seen quite a few KK's in this pattern, can't remember seeing one that wasn't mint which always makes me think fake or "unauthorized" reproduction etc. It's hard not to assume this given the fact that E.C. Simmons name is on the tang. E.C. Simmons, of course, went out of business before WWII.

JMO
BWT
Posts: 1868
Joined: Sat Jul 08, 2017 1:59 pm
Location: Central Florida

Re: Old Keen Kutter Knives

Post by BWT »

FRJ wrote:Here's a nice old knife that apparently has been recovered.
Sellens book says this should have Celluloid covers.
As it is, it has cracked jigged bone with a patch, thank you very much.
I love the spiral and those blades. And the pattern. And the stamp. And the nickel silver liners.
3 5/8" closed.
That's a good looking knife anyway Joe, I like the bone better than celluloid!!
Bill
User avatar
danno50
Gold Tier
Gold Tier
Posts: 3657
Joined: Mon Jan 12, 2009 12:05 am
Location: Saskatchewan, Canada

Re: Old Keen Kutter Knives

Post by danno50 »

msteele6 wrote:I've seen quite a few KK's in this pattern, can't remember seeing one that wasn't mint which always makes me think fake or "unauthorized" reproduction etc. It's hard not to assume this given the fact that E.C. Simmons name is on the tang. E.C. Simmons, of course, went out of business before WWII.

JMO
Sellens say "The trademark name and logo" were purchased by Val-Test in 1960. Perhaps Val-Test used both the EC Simmons and Keen Kutter names?? However, you are probably right and they are unauthorized reproductions, but, are they "reproductions" if they are a pattern that EC Simmons never made?
Dan
Post Reply

Return to “Keen Kutter”