Page 10 of 10

Re: POS ROUNDTABLE.... WITH A TWIST...............SIGN UP HE

Posted: Wed Nov 21, 2012 10:54 pm
by tjmurphy
No need to post them anywhere if ya don't want to. Ain't nothin' really special about them.

Re: POS ROUNDTABLE.... WITH A TWIST...............SIGN UP HE

Posted: Thu Nov 22, 2012 12:47 am
by glennbad
tjmurphy wrote:OK you guys. Geeze, you're no fun. My $20 (though it's worth more than that and a lot more than that to me), is a Camillus #72 pattern which Glenn modded with Aberdeen Jigged Amber Bone handles. My pictures suck and you really cannot see the beauty of the bone in hand. Thank you Glenn, I really, really, really appreciate this knife and it will be here for ever.
100_0288.JPG
100_0287.JPG
100_0290.JPG
THERE, ARE YOU HAPPY NOW!! ::mdm::
I am glad you are happy with it, TJ. I know the knife blades were a little chewed up. The last owner must have hated the knife, it looks like he took a grinder to it. Here's what it looked like before I started...

Image

I wish I had a little better of a knife to start with. I cleaned the blades up the best I could without removing too much metal.

As far as the rest of the poop, well, don't worry, I have enough for the next roundtable... 8)

Re: POS ROUNDTABLE.... WITH A TWIST...............SIGN UP HE

Posted: Thu Nov 22, 2012 12:50 am
by tjmurphy
WOWWWWWWWW!!! What a save Glenn. Again, thank you very much ::tu:: ::tu::

Re: POS ROUNDTABLE.... WITH A TWIST...............SIGN UP HE

Posted: Thu Nov 22, 2012 1:07 am
by glennbad
Well I finally received Dave O's package by pack mule today. From the outside, it looked harmless...

Image

I carefully opened it, hoping I was not going to have to institute any HazMat procedures. This was the first peek inside, looks interesting.

Image

After reading Dave's heartwarming letter to me about wanting send me the best POS knives he could, I viewed the ready to open booty...

Image

Here are what I assume Dave considers the POS knives..

Image

I don't know, they don't look that bad to me. However that knife at the top literally broke my thumbnail off. It's not my new friend. :x

I think this is the gem of the lot... ::tu::

Image

Dave also threw in this cool slingshot. Wasn't there someone on this forum that was making them?

Image

This looks like fun. I'll have to get out and do some plinking.

Dave O, you did awesome!

Re: POS ROUNDTABLE.... WITH A TWIST...............SIGN UP HE

Posted: Thu Nov 22, 2012 2:27 am
by jerryd6818
tjmurphy wrote:No need to post them anywhere if ya don't want to. Ain't nothin' really special about them.
Special to me.

Re: POS ROUNDTABLE.... WITH A TWIST...............SIGN UP HE

Posted: Fri Nov 23, 2012 10:22 pm
by 313 Mike
Alright! I got my pos package in today from Iron Hoarder....ironic that I received a package from the UK, with a China made knife "celebrating" it's pride in America! Hrmph! Wobbly Chinese lockback in it's own presentation box, very well qualified in the pos segment, I must say.
Now on the other hand...keeping in touch with the British orgins of the package, the "20.00" knife is a real nice one, from a maker that is new to me. A Wright & Sons, Sheffield England...blue jigged bone single blade "Real Lamb Foot"...snaps like a gator and is solid as can be, very nice, thanks much Robert! Very much appreciated. ::tu::

Mike
POS package 001.jpg
POS package 004.jpg
POS package 005.jpg
POS package 006.jpg

Re: POS ROUNDTABLE.... WITH A TWIST...............SIGN UP HE

Posted: Sat Nov 24, 2012 12:34 am
by jerryd6818
Hey Mike. I've looked at those English made "Real Lambs Foot" knives and considered buying one 'cause I like 'em. Haven't pulled the trigger so far but maybe one of these days...

Just so happens I received my package from Chet today. Pictures tomorrow but in the mean time, the POS (I guess) is a China made Kershaw DWO without the Kershaw on the handle or anyplace else on the knife. But you can tell it's an exact match for a DWO. Drop of oil on the blade and it's slick as a cat's aspirator.

The other two are a Camillus #69 Deluxe Premium Stock Knife with milled nickel silver liners and some pocket time. The other is a Pal Blade Co. EZ-Open jack with a bail, half stops and what I think might be Rogers bone handles. A chip out of the handle on each side at the rocker pin but who gives a flying fig, it's a keeper. I like 'em. A lot.

Hey Glenn. A trip through the sonic cleaner, a little oil and all blades are snappin' like your mother-in-law after a pork chop. I am very pleased my friend.

Re: POS ROUNDTABLE.... WITH A TWIST...............SIGN UP HE

Posted: Sat Nov 24, 2012 1:03 am
by Iron Hoarder
Glad you like'em Mike. That Chinese knife seriously irritated me. Cretins trying to capitalize on American values with cheap crap. ::facepalm::

Re: POS ROUNDTABLE.... WITH A TWIST...............SIGN UP HE

Posted: Sat Nov 24, 2012 3:53 am
by glennbad
jerryd6818 wrote: Hey Glenn. A trip through the sonic cleaner, a little oil and all blades are snappin' like your mother-in-law after a pork chop. I am very pleased my friend.
I am glad you are pleased!

Re: POS ROUNDTABLE.... WITH A TWIST...............SIGN UP HE

Posted: Sat Nov 24, 2012 11:20 am
by jerryd6818
Oops... Chet, not Glenn. :oops: :oops: :oops: :oops: :oops: Please forgive me. I'm sure it's age related.

Re: POS ROUNDTABLE.... WITH A TWIST...............SIGN UP HE

Posted: Sat Nov 24, 2012 1:33 pm
by Iron Hoarder
I finally got a chance to takes pictures of what was in the whiffer that landed on my doorstep. One Neverdull Cutlery two blade jack knife and the remains of a Camillus scout knife with the four line stamp. Thanks Sharalds.

Image

Image

Image

Re: POS ROUNDTABLE.... WITH A TWIST...............SIGN UP HE

Posted: Sun Nov 25, 2012 3:29 pm
by jerryd6818
Ended up helping some friends move yesterday so I didn't get pictures taken until this morning.

Top -- I guess this is supposed to be the POS of the bunch. China made knife that's exactly like a Kershaw 3000 DWO. I've been tempted to buy a DWO in spite of their being made in China, 'cause they make one in orange. This one has not been abused and is in good carried condition. (much better condition than the lockback I sent Chet :lol: )

Middle -- Pal Blade Co. EZ-Open jack with a bail. The blades have half-stops and the snap is pretty good. The pen blade has seen more use than the main blade. The handles are what looks to me like beautiful, pocket worn, Rogers bone with only two small chips, one on each side. It's a keeper for sure.

Bottom -- Camillus #69 Deluxe Premium Stock Knife with milled nickel silver liners. Tang stamp is '60-'76 long line. The Delrin they used when this knife was made, takes on a beautiful patina when pocket worn that sometimes makes it difficult to tell from bone. The blades are all full and snap with authority. Another keeper.

Thanks Chet.

Re: POS ROUNDTABLE.... WITH A TWIST...............SIGN UP HE

Posted: Sun Nov 25, 2012 5:41 pm
by chetr1200c
jerry, i had a tough time deciding how to do this roundhouse. i have too much junk and i didn't really want to send you any real junk. i also didn't know whether to go with new rough riders as pos and a new folder as the better one. but after much deliberation i decided on going the vintage route. a maker of your liking and a pattern of mine. and that china pos is something i did use for a while.
i am glad you like em. like i said earlier, i sent you my favorite number :oops: :) :D :mrgreen:

Re: POS ROUNDTABLE.... WITH A TWIST...............SIGN UP HE

Posted: Sun Nov 25, 2012 5:58 pm
by jerryd6818
I'm very happy with what I received, Chet. Now I just have to decide where to place them in the folders I use to store my accumulation. :D Once again, thank you very much.

Re: POS ROUNDTABLE.... WITH A TWIST...............SIGN UP HE

Posted: Sun Nov 25, 2012 11:45 pm
by orvet
Nice ones guys!
Mike, I like that "Real Lambs Foot". Let me know if you ever want to trade.

Re: POS ROUNDTABLE.... WITH A TWIST...............SIGN UP HE

Posted: Fri Nov 30, 2012 8:55 pm
by apong23
Whew, my POS finally arrived from Jody744. The post office seemed to have sent my package out for delivery in the wrong location, then was sent to my local post office. From there it went back out to a different post office, then came back again. I guess they got it all sorted out as I have it now.

Post office must have known that it was a POS and just kept trying to get rid of it, so I was expecting some bad stuff when it arrived. Upon opening, I see 2 Case knives. One small 059L, the POS which is a good user. The other is a nice sod buster Jr., funny that I was actually looking into getting myself a sodbuster. Now this one is better, because it has a small story behind it.

Thanks again Jody744. ::tu::

Image

Re: POS ROUNDTABLE.... WITH A TWIST...............SIGN UP HE

Posted: Thu Dec 06, 2012 5:25 pm
by Paladin 51
I received my box from Conservativeknives some time ago but as my phone won't let me post pics and my daughter's laptop was having issues, I now get to post my latest. A genuine made in India whatcamacallit and a great Victorinox. That red handled knife has seen quite a bit of pocket time. I have never owned one and I must say that it is perhaps the sharpest knives out of the box I have ever owned and is not shy at all about cutting.
Thanks so much

Ken

Re: POS ROUNDTABLE.... WITH A TWIST...............SIGN UP HE

Posted: Thu Dec 06, 2012 9:00 pm
by ConservativeKnives
Paladin 51 wrote:I received my box from Conservativeknives some time ago but as my phone won't let me post pics and my daughter's laptop was having issues, I now get to post my latest. A genuine made in India whatcamacallit and a great Victorinox. That red handled knife has seen quite a bit of pocket time. I have never owned one and I must say that it is perhaps the sharpest knives out of the box I have ever owned and is not shy at all about cutting.
Thanks so much

Ken

Glad ya like em! Don't be afraid to use em! ::nod::

Re: POS ROUNDTABLE.... WITH A TWIST...............SIGN UP HE

Posted: Sun Dec 09, 2012 11:21 pm
by ConservativeKnives
OK, so I FINALLY got my package from Keithlong ::sotb::

Got my first Boker, my first stockman as well. Anyone know how old this is? Sharpened it up, and the steel was surprisingly very soft. Really cool and a great EDC size.

The Chinaman is a bon-e-fide POS. I have never seen such an ugly POS in my life. I brought it in the back yard and shot it a couple times, which was actually quite fun ::nod::

This pen is absolutely awesome. Handmade from deer antler! I will definitely be carrying it for a while. It is 1/2 the weight of my Titanium pen, so it is much easier to carry, especially with the deep carry clip!

Thanks again Keith!! ::groove::