Page 103 of 127
Re: Show Us Your Camillus Knives!
Posted: Fri Jun 04, 2021 9:37 pm
by Dan In MI
This electrician's knife (pretty sure it's a 27) got to me recently. It will be an occasional carrier. Thanks to GSPTOPDOG for this one!
Re: Show Us Your Camillus Knives!
Posted: Fri Jun 04, 2021 11:54 pm
by Ripster
Thanks Vit, that’s a nice Series of knives. Didn’t realize there were that many in the Series

Re: Show Us Your Camillus Knives!
Posted: Fri Jun 04, 2021 11:56 pm
by Ripster
Dan In MI wrote: ↑Fri Jun 04, 2021 9:37 pm
This electrician's knife (pretty sure it's a 27) got to me recently. It will be an occasional carrier. Thanks to GSPTOPDOG for this one!
Electrician's Knife.jpg
Electrician's Knife Opened.jpg
Electrician's Knife Tang Stamp.jpg
Dan , good choice ,that’s the handiest dang knive to have laying around . Don’t see many with that blade etch,nice touch

.
Re: Show Us Your Camillus Knives!
Posted: Sat Jun 05, 2021 12:06 am
by Papa Bones
Added a couple to my Camillus family today.
First, another Camillus 21 Pony Jack.2-13/16 inches closed, It has the long line Camillus tang stamp on the front side of the clip blade, with 21 on the pile side with a pen secondary blade. It has the brown jigged( what Camillus called "Brownstag") handles, and was not produced with a shield. Blades are tight, great snap, no wobble, have the factory luster, but does have some spotting. Inside of blade well and springs are clean. The only thing I've done is oil the joints. Here are the photos.




I also added a Camillus 14 Serpentine Jack. It is also has the Camillus long line tang stamp on the front side of the clip blade with 14 on the pile side, with a pen secondary blade. The blades are tight, no wobble, and great snap. They have the original luster, but do have some staining and spots. The Handles are the Brownstag handles with a federal shield. The handles do have some slight oxidation, but I believe I can cure that with the usual warm mineral oil soak. Inside the blade well is clean with just some slight spotting on the springs. At the present time all I've done is oil the joints. Here are the photos.
Re: Show Us Your Camillus Knives!
Posted: Sat Jun 05, 2021 1:21 am
by Dan In MI
Thanks for the kudos, JP. Now I have an excuse to get more of them!
And Smitty, I'll say it again: your pocket Jacks form a winning hand!
Re: Show Us Your Camillus Knives!
Posted: Sat Jun 05, 2021 2:51 am
by Papa Bones
Dan In MI wrote: ↑Sat Jun 05, 2021 1:21 am
Thanks for the kudos, JP. Now I have an excuse to get more of them!
And Smitty, I'll say it again: your pocket Jacks form a winning hand!
Thanks Dan, and I'm sure that good looking 27 will show up in the "What are you carrying right now" thread.

Re: Show Us Your Camillus Knives!
Posted: Sat Jun 05, 2021 8:28 pm
by New_Windsor_NY
Dan In MI wrote: ↑Fri Jun 04, 2021 9:37 pm
This.....
Dan, that's a VERY g@@d l

king piece of cutlery!
Papa Bones wrote: ↑Sat Jun 05, 2021 12:06 am
Added.....
FANTASTIC acquisitions, Smitty.

Re: Show Us Your Camillus Knives!
Posted: Sat Jun 05, 2021 9:49 pm
by Dan In MI
Thanks, Skip. I hope to add more of them!
Re: Show Us Your Camillus Knives!
Posted: Sat Jun 05, 2021 10:04 pm
by Papa Bones
New_Windsor_NY wrote: ↑Sat Jun 05, 2021 8:28 pm
FANTASTIC acquisitions, Smitty.
Appreciate it Skip!!
Re: Show Us Your Camillus Knives!
Posted: Sat Jun 05, 2021 11:52 pm
by GSPTOPDOG
Dan In MI wrote: ↑Fri Jun 04, 2021 9:37 pm
This electrician's knife (pretty sure it's a 27) got to me recently. It will be an occasional carrier. Thanks to GSPTOPDOG for this one!
Electrician's Knife.jpg
Electrician's Knife Opened.jpg
Electrician's Knife Tang Stamp.jpg
Hey that is a great looking knife!!!

Re: Show Us Your Camillus Knives!
Posted: Sat Jun 05, 2021 11:54 pm
by GSPTOPDOG
Papa Bones wrote: ↑Sat Jun 05, 2021 12:06 am
Added a couple to my Camillus family today.
First, another Camillus 21 Pony Jack.2-13/16 inches closed, It has the long line Camillus tang stamp on the front side of the clip blade, with 21 on the
A very nice Camillus 21 Pony Jack.

Re: Show Us Your Camillus Knives!
Posted: Sun Jun 06, 2021 2:04 am
by cody6268
Dan In MI wrote: ↑Fri Jun 04, 2021 9:37 pm
This electrician's knife (pretty sure it's a 27) got to me recently. It will be an occasional carrier. Thanks to GSPTOPDOG for this one!
Electrician's Knife.jpg
Electrician's Knife Opened.jpg
Electrician's Knife Tang Stamp.jpg
Nice!
Those things are addicting. I started with just a Colonial my Granddad gave me, as well as a 1980s Camillus, the first knife I bought online when I was 17. At last count, I had one each in my toolboxes, one in my compact toolkit, several users (not all Camillus), and a Craftsman (which I think is Camillus-made) 9560 and a WWII era TL-29 in the collection. This doesn't count Schrade versions, as well as assorted others like a Colonial.
I still need to add Xcelite (there's also a tang-stamped "XCELITE" version) and the two Channellock versions (there's both the typical black, as well as a sort of rare Channellock Blue handle version; which I've seen exactly ONE of).
Re: Show Us Your Camillus Knives!
Posted: Sun Jun 06, 2021 2:13 am
by Ripster
cody6268 wrote: ↑Sun Jun 06, 2021 2:04 am
Dan In MI wrote: ↑Fri Jun 04, 2021 9:37 pm
This electrician's knife (pretty sure it's a 27) got to me recently. It will be an occasional carrier. Thanks to GSPTOPDOG for this one!
Electrician's Knife.jpg
Electrician's Knife Opened.jpg
Electrician's Knife Tang Stamp.jpg
Nice!
Those things are addicting. I started with just a Colonial my Granddad gave me, as well as a 1980s Camillus, the first knife I bought online when I was 17. At last count, I had one each in my toolboxes, one in my compact toolkit, several users (not all Camillus), and a Craftsman (which I think is Camillus-made) 9560 and a WWII era TL-29 in the collection. This doesn't count Schrade versions, as well as assorted others like a Colonial.
I still need to add Xcelite (there's also a tang-stamped "XCELITE" version) and the two Channellock versions (there's both the typical black, as well as a sort of rare Channellock Blue handle version; which I've seen exactly ONE of).
Cody, didn’t know that the Channellock blue was sort of rare,just saw one on the bay believe it was . If I can find it will get you info if interested,think I put it on my watch list .
Re: Show Us Your Camillus Knives!
Posted: Sun Jun 06, 2021 4:02 am
by Dan In MI
GSPTOPDOG wrote: ↑Sat Jun 05, 2021 11:52 pm
Hey that is a great looking knife!!!
Indeed it is.
cody6268 wrote: ↑Sun Jun 06, 2021 2:04 am
Those things are addicting.
Yes indeed...right up there with Alox Swiss Army knives. I'm already looking for more.
Ripster wrote: ↑Sun Jun 06, 2021 2:13 am
Didn't know that the Channellock blue was sort of rare,just saw one on the bay believe it was .
Was it this one?
https://www.ebay.com/itm/224356893830
Re: Show Us Your Camillus Knives!
Posted: Sun Jun 06, 2021 10:22 am
by Ripster
Dan In MI wrote: ↑Sun Jun 06, 2021 4:02 am
GSPTOPDOG wrote: ↑Sat Jun 05, 2021 11:52 pm
Hey that is a great looking knife!!!
Indeed it is.
cody6268 wrote: ↑Sun Jun 06, 2021 2:04 am
Those things are addicting.
Yes indeed...right up there with Alox Swiss Army knives. I'm already looking for more.
[
Yep, that’s it . Go for it Dan ,make em a offer . Am passing on this one. They don’t come up for sale often
Was it this one?
https://www.ebay.com/itm/224356893830
[/quote]
Yes that’s the one, go for it,am going to pass on this one. Like you said Dan, not many out there .
Re: Show Us Your Camillus Knives!
Posted: Mon Jun 07, 2021 12:24 am
by Dan In MI
Ripster wrote: ↑Sun Jun 06, 2021 10:22 am
Yes that’s the one, go for it,am going to pass on this one.
It's in my watch list for now. But I did get a seller offer on a Channel-Lock 27. For less than $15 out-the-door, I couldn't pass it up!
Re: Show Us Your Camillus Knives!
Posted: Thu Jun 10, 2021 10:06 pm
by Papa Bones
added a couple more to my Camillus family. Both came with the boxes, original papers, and sleeve. One is a 1997 Camillus Rimfire Classic 22LR6 Carpenters Whittler (a 72 Clone) and has delrin handles with the .22 rimfire brass shield. Next is a 1995 Camillus Rimfire Classic 22LR4 Muskrat, same handles same shield. Both have the Rimfire Classic etch on the master blades and the pattern number and year on the pile side tang of the master blade.
Re: Show Us Your Camillus Knives!
Posted: Thu Jun 10, 2021 10:38 pm
by New_Windsor_NY
Papa Bones wrote: ↑Thu Jun 10, 2021 10:06 pm
added.....
They're both BEAUTIES, Smitty.
Boxes and paperwork, BONUS!

Re: Show Us Your Camillus Knives!
Posted: Fri Jun 11, 2021 12:12 am
by doglegg
Glad you got those Papa Bones. Both in perfect shape.

Re: Show Us Your Camillus Knives!
Posted: Fri Jun 11, 2021 1:43 am
by Ripster
Smitty, you’ve been busy and doing well . Nice couple of knives, and as mentioned,always nice to get the boxes ,etc,with the knife .
Well done

Re: Show Us Your Camillus Knives!
Posted: Fri Jun 11, 2021 2:55 am
by Papa Bones
Thank you Skip. The 22LR6 I was really hyped for.
doglegg wrote: ↑Fri Jun 11, 2021 12:12 am
Glad you got those Papa Bones. Both in perfect shape.
Appreciate it FLoyd.
Ripster wrote: ↑Fri Jun 11, 2021 1:43 am
Smitty, you’ve been busy and doing well . Nice couple of knives, and as mentioned,always nice to get the boxes ,etc,with the knife .
Well done
Thanks JP. I added the correct pile side photo. Just noticed I had two of the mark side posted.

All good though!
Re: Show Us Your Camillus Knives!
Posted: Fri Jun 11, 2021 3:37 am
by Dan In MI
Papa Bones wrote: ↑Thu Jun 10, 2021 10:06 pm
added a couple more to my Camillus family.
Nice pick-ups, Smitty!
Re: Show Us Your Camillus Knives!
Posted: Fri Jun 11, 2021 2:38 pm
by Quick Steel
This Camillus Rope Knife or Sailor's Knife has a locking Marlinspike which is released by the bail.
Re: Show Us Your Camillus Knives!
Posted: Fri Jun 11, 2021 2:54 pm
by New_Windsor_NY
Garry,

Re: Show Us Your Camillus Knives!
Posted: Fri Jun 11, 2021 4:41 pm
by doglegg