Page 18 of 20
Re: SHARE YOUR BENCHMADES
Posted: Thu Jan 11, 2024 2:39 pm
by Jtx
garddogg56 wrote: ↑Thu Jan 11, 2024 12:15 am
RR and Iman now that's a great knife for the backpack
JTX do you like the feel of the aluminum scales?
I like the feel of the original Bugout scales but they are thin
garddog, The AWT aluminum scales change a nice knife into a great knife for me. They add less than 1 oz. to the weight of the knife. The real difference is the "feel" of the scales... more substantial than the original scales. They are easier on my hands the plastic scales. I have a few Bugouts and Mini Bugouts and I have changed all of them to the AWT scales. (I am not affiliated with AWT, I just like their products.)
If you have any questions, let me know.
Re: SHARE YOUR BENCHMADES
Posted: Thu Jan 11, 2024 7:47 pm
by garddogg56
Ok thanx
Re: SHARE YOUR BENCHMADES
Posted: Mon Jan 15, 2024 12:06 am
by Jtx
Bailout
Re: SHARE YOUR BENCHMADES
Posted: Sun Feb 04, 2024 3:06 pm
by garddogg56
My love with Benchmade started in 1998 when the appendices on the job showed me the importance of a off hand knife in the trades when they got me a Stryker because when climbing with safety gear and a tool pouch on and I can’t reach my sheathed trusty Buck .112. With my right hand I can pull my clipped knife with my left hand
The picture show my evolution with modern knives, now remember I will always have a slip joint in my pocket,a sheathed lb on my belt usually a Buck.
Second pic is my quarterly oiling of my Benchmade knives
Re: SHARE YOUR BENCHMADES
Posted: Mon Feb 05, 2024 4:17 am
by Ivoryman
garddogg56 wrote: ↑Sun Feb 04, 2024 3:06 pm
My love with Benchmade started in 1998 when the appendices on the job showed me the importance of a off hand knife in the trades when they got me a Stryker because when climbing with safety gear and a tool pouch on and I can’t reach my sheathed trusty Buck .112. With my right hand I can pull my clipped knife with my left hand
The picture show my evolution with modern knives, now remember I will always have a slip joint in my pocket,a sheathed lb on my belt usually a Buck.
Second pic is my quarterly oiling of my Benchmade knives
That's a nice line up. That's experience you only get over time. Interesting evolution of pieces. Great post.
Re: SHARE YOUR BENCHMADES
Posted: Mon Feb 05, 2024 11:12 am
by garddogg56
Thanx Iman
Re: SHARE YOUR BENCHMADES
Posted: Mon Feb 05, 2024 1:52 pm
by Jtx
garddogg56 wrote: ↑Sun Feb 04, 2024 3:06 pm
My love with Benchmade started in 1998 when the appendices on the job showed me the importance of a off hand knife in the trades when they got me a Stryker because when climbing with safety gear and a tool pouch on and I can’t reach my sheathed trusty Buck .112. With my right hand I can pull my clipped knife with my left hand
The picture show my evolution with modern knives, now remember I will always have a slip joint in my pocket,a sheathed lb on my belt usually a Buck.
Second pic is my quarterly oiling of my Benchmade knives
Great group of Benchmades!
Re: SHARE YOUR BENCHMADES
Posted: Mon Feb 05, 2024 9:51 pm
by 1967redrider
Awesome family portrait, gard.
Re: SHARE YOUR BENCHMADES
Posted: Tue Feb 06, 2024 12:45 am
by garddogg56
Thanx JTX andRR
Re: SHARE YOUR BENCHMADES
Posted: Tue Feb 27, 2024 5:32 pm
by Jtx
Bugout
Re: SHARE YOUR BENCHMADES
Posted: Wed Feb 28, 2024 12:46 am
by garddogg56
Those scales do look good JTX
When I get sick of the factory scales I may have to look into those
Re: SHARE YOUR BENCHMADES
Posted: Wed Feb 28, 2024 1:59 pm
by Jtx
garddogg56 wrote: ↑Wed Feb 28, 2024 12:46 am
Those scales do look good JTX
When I get sick of the factory scales I may have to look into those
Thanks garddogg. I really enjoy them and I think you would too. They are very comfortable in the hand. Here is a photo of the different colors that I have on my knives.
Re: SHARE YOUR BENCHMADES
Posted: Thu Feb 29, 2024 12:45 am
by garddogg56
Nice your tempting me
Re: SHARE YOUR BENCHMADES
Posted: Sat Mar 23, 2024 8:37 pm
by Jtx
Bugout with FDE blade and OD Green scales. (Pocket clip from Lynch NW)
Re: SHARE YOUR BENCHMADES
Posted: Mon Mar 25, 2024 1:21 am
by Ivoryman
Jtx wrote: ↑Wed Feb 28, 2024 1:59 pm
garddogg56 wrote: ↑Wed Feb 28, 2024 12:46 am
Those scales do look good JTX
When I get sick of the factory scales I may have to look into those
Thanks garddogg. I really enjoy them and I think you would too. They are very comfortable in the hand. Here is a photo of the different colors that I have on my knives.
Nice looking group, they are beauties, the brand is growing on me. This Proper is a great knife and blade profile. Seen here with a GEC 13.
Re: SHARE YOUR BENCHMADES
Posted: Mon Mar 25, 2024 11:41 pm
by garddogg56
I like that blade shape Iman
Re: SHARE YOUR BENCHMADES
Posted: Thu Mar 28, 2024 5:50 am
by Ivoryman
garddogg56 wrote: ↑Mon Mar 25, 2024 11:41 pm
I like that blade shape Iman
Thanks bud, appreciate the mention and hope you're having a great one..
Re: SHARE YOUR BENCHMADES
Posted: Wed Apr 17, 2024 11:56 am
by Lansky1
Jtx wrote: ↑Tue Feb 27, 2024 5:32 pmBugout
Hi Jtx - as you've done a few scale changes ... are there any secrets you learned about disassembling the bugout to change the scales ? I ordered lime green G10 scales and am a bit apprehensive about removing the center blade pin as there are spacerwashers and likely other "stuff" in there I'm not sure how to get back together ... was it a PIA or not too bad to reassemble the knife with the new scales ? Also, do you happen to know what are the sizes of the 2 star driver bits it requires - the screws are so tiny ... thanks !!
Re: SHARE YOUR BENCHMADES
Posted: Wed Apr 17, 2024 12:33 pm
by Jtx
Lansky1 wrote: ↑Wed Apr 17, 2024 11:56 am
Jtx wrote: ↑Tue Feb 27, 2024 5:32 pmBugout
Hi Jtx - as you've done a few scale changes ... are there any secrets you learned about disassembling the bugout to change the scales ? I ordered lime green G10 scales and am a bit apprehensive about removing the center blade pin as there are spacerwashers and likely other "stuff" in there I'm not sure how to get back together ... was it a PIA or not too bad to reassemble the knife with the new scales ? Also, do you happen to know what are the sizes of the 2 star driver bits it requires - the screws are so tiny ... thanks !!
Lansky1, I watched videos on uTube showing the process. AWT has some on uTube. The videos will tell you everything you need to know. I will admit that the first one was intimidating. I am confident that you can do it. If you end up with a pile of parts and can not get them back together, then perhaps you can send everything to me and I will be happy to reassemble it for you. You will need a Torx T6 driver for the scale screws and a Torx T10 for the pivot screw. Go slow and have fun.
Re: SHARE YOUR BENCHMADES
Posted: Wed Apr 17, 2024 5:37 pm
by Lansky1
Hey Jtx - thanks so much for the intel. Great idea about the youtube vids - I'll start there & pick up the torx bits needed. Appreciate the reply bro !
Re: SHARE YOUR BENCHMADES
Posted: Sun May 19, 2024 2:50 pm
by Jtx
Bugout with after-market scales and clip.
Re: SHARE YOUR BENCHMADES
Posted: Sat Jun 08, 2024 3:50 am
by RedRaiderRick
Just scored this Bugout. Carbon fiber scales and S90V blade steel.
Re: SHARE YOUR BENCHMADES
Posted: Sat Jun 08, 2024 2:19 pm
by Jtx
RedRaiderRick wrote: ↑Sat Jun 08, 2024 3:50 am
Just scored this Bugout. Carbon fiber scales and S90V blade steel. 20240607_214400.jpg
20240607_214400.jpg
Those carbon fiber scales look great!
Re: SHARE YOUR BENCHMADES
Posted: Sat Jun 08, 2024 2:31 pm
by Railsplitter
Mini Bugout.
Re: SHARE YOUR BENCHMADES
Posted: Fri Jun 14, 2024 12:51 pm
by Jtx
Nice one Railsplitter!
The picture show my evolution with modern knives, now remember I will always have a slip joint in my pocket,a sheathed lb on my belt usually a Buck.
