Page 3 of 3

Re: the FRONTIER Series

Posted: Tue May 01, 2018 2:35 am
by deltaboy
Scored a real nice Frontier Stockman!

Re: the FRONTIER Series

Posted: Sat May 19, 2018 3:50 am
by deltaboy
Still hunting for a nice one.

Re: the FRONTIER Series

Posted: Sat May 26, 2018 2:04 am
by ohpossum
I recently picked up a Frontier 435 in Colorado -- best vacation souvenir yet. When I got it, the scales were dried and cracked, with a big chip out of the shoulder. I fixed the cracks with epoxy and a good oil, and patched up the chip with a turquoise/chrysocolla inlay. The blade has some flat spots but I'm working those out. The knife is older than me and I'm looking forward to putting it to use again.

This thread has been really valuable in learning the history of my knife!

Re: the FRONTIER Series

Posted: Sat May 26, 2018 2:19 am
by UnderDawgAl
Looks great! Nice repair job.

Re: the FRONTIER Series

Posted: Tue Feb 12, 2019 9:48 pm
by UnderDawgAl
Here's one I bought several months ago on the auction site for about the cost of a fast food meal, upsized of course.

It was nearly immaculate when I got it, but it's since sliced a lot of fruit, as you can tell from the clip blade.

Click all pics to enlarge.
Imperial Frontier 4132
Imperial Frontier 4132
Still in business, do you think?
Still in business, do you think?
What model is this again?  Oh yeah.
What model is this again? Oh yeah.

Re: the FRONTIER Series

Posted: Tue Feb 12, 2019 10:02 pm
by tongueriver
Good knife, and rare correct use of the apostrophe; I always like to see that. ::tu:: :D

Re: the FRONTIER Series

Posted: Fri Feb 15, 2019 2:00 am
by UnderDawgAl
tongueriver wrote:Good knife, and rare correct use of the apostrophe; I always like to see that. ::tu:: :D
Ha! One of these days, I'll teach folks the correct usage for "me", "myself", and "I".

Back to the topic, here's another Frontier I received today from the auction site, for less than the cost of a Rough Rider. It's the same size as the one I posted above, at 3-1/4 inches.

Click the pic to enlarge.
Imperial Frontier 4134 -- basically a 34OT
Imperial Frontier 4134 -- basically a 34OT
I bought it because my young son wants to carry a knife like Dad's. This way, on the weekends and when out and about, we can both carry them. He's definitely excited.

Re: the FRONTIER Series

Posted: Fri Feb 15, 2019 3:09 am
by doglegg
The thought of you and your son carrying like knives move those from good knives to great knives. Happy for the both of you. ::tu:: ::tu::

Re: the FRONTIER Series

Posted: Fri Jul 01, 2022 2:00 am
by New_Windsor_NY
This afternoon, my trip to the post office produced a group or lot of pocket knives that I had purchased. This particular pocket knife, just one out of the group or lot of knives, was NOT the target of the purchase. But, it did turn out to be a keeper. It is a FRONTIER, THE ALL AMERICANS, AA-41, single blade, single tang stamp, 4" closed, lockback pocket knife. The tang stamp says "FRONTIER (curved or arched downward) - AA-41 U.S.A. - STAINLESS (curved or arched upward). It has so-so snap, but no blade wobble. Overall, it is in VERY GOOD condition. It is definitely worthy of some carry time.
I gave it a minor cleaning. I took some pictures and here it is.
Caption(s), if any, are on the BOTTOM of the corresponding picture(s).
Click on a picture to ENLARGE.

Re: the FRONTIER Series

Posted: Fri Jul 01, 2022 2:29 am
by LRV
Nice AA.
Getting hard to find these.
::tu::

Re: the FRONTIER Series

Posted: Fri Jul 01, 2022 2:33 am
by New_Windsor_NY
LRV wrote: Fri Jul 01, 2022 2:29 am Nice.....
Thank you, LRV.🍻

Re: the FRONTIER Series

Posted: Fri Jul 01, 2022 5:12 am
by Dan In MI
Great shield on that one. It is indeed a keeper!

Re: the FRONTIER Series

Posted: Fri Jul 01, 2022 1:44 pm
by New_Windsor_NY
Dan In MI wrote: Fri Jul 01, 2022 5:12 am Great.....
Thank you, Dan.🍻

Re: the FRONTIER Series

Posted: Fri Jul 01, 2022 9:34 pm
by zed6309
This is my only frontier knife, after getting it I hunted high and low online but couldnt find one with the scrimshaw panels, so the original owner must of added them, he did a great job 👌
20210913_083040-02.jpeg

Re: the FRONTIER Series

Posted: Sat Jul 02, 2022 1:11 am
by New_Windsor_NY
zed6309 wrote: Fri Jul 01, 2022 9:34 pm This is my only frontier knife, after getting it I hunted high and low online but couldnt find one with the scrimshaw panels, so the original owner must of added them, he did a great job 👌20210913_083040-02.jpeg
VERY g@@d l👀king piece of cutlery, Paul. ::tu:: ::tu::
I like the scrimshaw add-ons. ::tu:: ::tu::

Re: the FRONTIER Series

Posted: Sat Jul 02, 2022 2:17 pm
by zed6309
New_Windsor_NY wrote: Sat Jul 02, 2022 1:11 am
zed6309 wrote: Fri Jul 01, 2022 9:34 pm This is my only frontier knife, after getting it I hunted high and low online but couldnt find one with the scrimshaw panels, so the original owner must of added them, he did a great job 👌20210913_083040-02.jpeg
VERY g@@d l👀king piece of cutlery, Paul. ::tu:: ::tu::
I like the scrimshaw add-ons. ::tu:: ::tu::
Cheers Skip ::tu:: its defantly individual :D

Re: the FRONTIER Series

Posted: Sat Jul 02, 2022 3:15 pm
by New_Windsor_NY
A few months ago this pocket knife arrived in a large group or lot of pocket knives that I purchased. I did NOT buy the group or lot to obtain this particular pocket knife. But, it definitely turned out to be a keeper. It is an IMPERIAL FRONTIER, pattern 4135, three blades, two springs, two tang stamps, a blade etch, 3 1/4" closed, "STOCKMAN" pattern or style, pocket knife. The main blade front tang stamp reads "FRONTIER" (curved) with powder horn stamped symbol. The main blade back tang stamp reads "4135 - IMPERIAL - STAINLESS - USA" The main blade etch reads "FRONTIER Double - Eagle" with logo. It is in EXCELLENT condition. It needed no cleaning, I just wiped it off, took some pictures and here it is.
Caption(s), if any, are on the BOTTOM of the corresponding picture(s).
Click on a picture to ENLARGE.

Re: the FRONTIER Series

Posted: Sat Jul 09, 2022 9:45 pm
by New_Windsor_NY
Recently, my trip to the post office produced this pocket knife. It is a FRONTIER, THE ALL AMERICANS, AA-31, single blade, single tang stamp, 3" closed, lockback, pocket knife. The tang stamp says "FRONTIER (curved or arched downward) (over) AA-31 U.S.A. (over) STAINLESS (curved or arched upward). It has so-so snap, but no blade wobble. Overall, it is in VERY GOOD condition. It is definitely worthy of some pocket time. I gave it a minor cleaning. I took some pictures and here it is. The last picture shows the FRONTIER AA-31 paired up with my previously posted, FRONTIER AA-41.
Caption(s), if any, are on the BOTTOM of the corresponding picture(s).
Click on a picture to ENLARGE.

Re: the FRONTIER Series

Posted: Sun Jul 10, 2022 3:55 pm
by Dan In MI
Another superb addition, Skip! ::tu:: That's one I'd buy because it has a distinctive and different shield. If my knife budget wasn't gone, I'd ask you to send some of your knife hunting luck to Michigan!

Re: the FRONTIER Series

Posted: Sun Jul 10, 2022 4:00 pm
by New_Windsor_NY
Very recently, my trip to the post office produced this pocket knife. It is a FRONTIER, THE ALL AMERICANS, P-1, one blade, two tang stamps, a blade etch, 3" closed, lockback pocket knife. The main blade front tang stamp says "FRONTIER (straight) (over) U.S.A." The main blade back tang stamp says "P-1 (over) IMPERIAL (over) STAINLESS." The main blade etch says "Dairymen (over) Safety Award" It has a so-so snap, but no blade wobble. Overall, it is in VERY GOOD condition. It is definitely worthy of some pocket time. I gave it a very minor cleaning. I took some pictures and here it is.
Caption(s), if any, are on the BOTTOM of the corresponding picture(s).
Click on a picture to ENLARGE.

Re: the FRONTIER Series

Posted: Sat Apr 06, 2024 2:30 am
by UnderDawgAl
Here's a 4431 that my 13-year-old son bought at a steam engine show for $7. It was completely rusted. I wish that I had taken a pic before he started cleaning it. After lots of simple green, multiple cycles in the sonic cleaner, and judicious applications of sandpaper and Flitz, he ended up with a great user!
Imperial Frontier 4431
Imperial Frontier 4431
You'll see a nick in the clip blade. I presume that was due to rust. It looks like it's made to strip wire. My son sold it to dear old dad for a little more than he paid for it. I carry and use it nearly every day these days. Hard to go wrong with the 8OT pattern.
Blades could use some more sandpaper on those scratches!
Blades could use some more sandpaper on those scratches!
Edited to add the following: Below pic, I cleaned up the blades some with some additional judicious sanding to get rid of those obvious sanding lines, and I modified the spey to more of a pen blade shape so that the top of the spey doesn't block the nail nick of sheepsfoot.
IMG_20240406_205229~3.jpg

Re: the FRONTIER Series

Posted: Tue Apr 09, 2024 7:29 pm
by Km123
Found this by the creek while on a walk a few months back and only recently thought to look up stuff on it- ended up finding this forum! :D this Is my first (and currently only) pocket knife so I don't know much but I think it'll be fun to find out more :)

Re: the FRONTIER Series

Posted: Wed Apr 10, 2024 3:48 am
by TPK
Km123 wrote: Tue Apr 09, 2024 7:29 pm Found this by the creek while on a walk a few months back and only recently thought to look up stuff on it- ended up finding this forum! :D this Is my first (and currently only) pocket knife so I don't know much but I think it'll be fun to find out more :)
Well congrats on the super cool find! ::nod:: ::handshake:: ::super_happy:: And it's a lock back too! That's great! ::tu:: Somebody is surely missing that one! ::nod::

And ::welcome:: to the AAPK! ::handshake:: ::super_happy:: We're glad you found your way here. ::tu:: ::super_happy:: Lot a good people here so pull up a chair and make yourself at home. ::tu::

I'm not the sharpest tool in the shed ::cb:: so I'll let some of the more knowledgeable members here tell you more about your new knife. :wink: ::tu::

Re: the FRONTIER Series

Posted: Tue Jan 06, 2026 3:06 pm
by OLDE CUTLER
Added to my pile this past weekend. Frontier Jr. stockman 4131, Frontier folding lock blade, AA-51 stainless with belt sheath. My first All American.
IMG_6344.JPG
IMG_6345.JPG
IMG_6346.JPG