Page 3 of 7

Re: It's Sears Craftsman Thursday

Posted: Sat Oct 25, 2025 6:51 pm
by Gtrclktr-351
goldwood wrote: Sun Oct 19, 2025 8:37 pm cr2.jpgcraftsman.jpg
That is a very nice Craftsman auto. I didn't know they "made" autos.

Re: It's Sears Craftsman Thursday

Posted: Sat Oct 25, 2025 8:11 pm
by Ridgegrass
95026 "A.C.A. EDGE" 5-1/4 in. Craftsman. (Schrade? Buck?) Big, tough knife. PM me if interested. Thanks, J.O'.

Re: It's Sears Craftsman Thursday

Posted: Sat Oct 25, 2025 8:36 pm
by GSPTOPDOG
Ridgegrass wrote: Sat Oct 25, 2025 8:11 pm 95026 "A.C.A. EDGE" 5-1/4 in. Craftsman. (Schrade? Buck?) Big, tough knife. PM me if interested. Thanks, J.O'.
Very nice!!! I love those big trappers ::nod:: .... ::hmm:: I would think it is a Schrade..... ::shrug::

Re: It's Sears Craftsman Thursday

Posted: Sat Oct 25, 2025 8:58 pm
by Ridgegrass
I also have a Kabar that is very similar. ::shrug:: J.O'.

Re: It's Sears Craftsman Thursday

Posted: Sun Oct 26, 2025 4:40 pm
by tvic
QTCut5 wrote: Sat Oct 25, 2025 1:05 pm
tvic wrote: Fri Oct 24, 2025 1:10 pm A day late (I’m always a day late and a dollar short), but here’s my contribution for this week.
You always take such nicely composed photos, Tim....you really ought to consider posting them in the "Knife Photography" thread ::nod::
Thanks, Q! I have a lot of fun trying to figure out how to take the next one. And, as you can see, I like labeling my photos, too. You make some really nice ones, too. Wish I had the flowers and the scenery you have there!

Re: It's Sears Craftsman Thursday

Posted: Thu Oct 30, 2025 3:04 pm
by tvic
Made by Camillus and celebrating Craftsman’s 65th anniversary.

Re: It's Sears Craftsman Thursday

Posted: Fri Oct 31, 2025 8:43 pm
by rea1eye
tvic wrote: Thu Oct 30, 2025 3:04 pm Made by Camillus and celebrating Craftsman’s 65th anniversary.
Very nice knife. Thanks for keeping the thread going.

Bob

Re: It's Sears Craftsman Thursday

Posted: Sat Nov 01, 2025 1:34 am
by Dinadan
Ridgegrass wrote: Sat Oct 25, 2025 8:11 pm 95026 "A.C.A. EDGE" 5-1/4 in. Craftsman.
A tough looking knife, Ridgegrass.
tvic wrote: Thu Oct 30, 2025 3:04 pm Made by Camillus and celebrating Craftsman’s 65th anniversary.
That lockback is a beauty, Tim! Camillus did really good for Sears with that knife.

I know I am a day late, but here is one of my backyard knives. Seems like a lot of Craftsman knives got used up or abused. I have a few with broken blades or just worn out blades. This one has both!
Craftsman
Craftsman

Re: It's Sears Craftsman Thursday

Posted: Sat Nov 01, 2025 2:34 am
by Ridgegrass
Dinadan, You could be skinning a buck with it by next Thursday. :D J.O'.

Re: It's Sears Craftsman Thursday

Posted: Sat Nov 01, 2025 1:55 pm
by doglegg
Dinadan wrote: Sat Nov 01, 2025 1:34 am
Ridgegrass wrote: Sat Oct 25, 2025 8:11 pm 95026 "A.C.A. EDGE" 5-1/4 in. Craftsman.
A tough looking knife, Ridgegrass.
tvic wrote: Thu Oct 30, 2025 3:04 pm Made by Camillus and celebrating Craftsman’s 65th anniversary.
That lockback is a beauty, Tim! Camillus did really good for Sears with that knife.

I know I am a day late, but here is one of my backyard knives. Seems like a lot of Craftsman knives got used up or abused. I have a few with broken blades or just worn out blades. This one has both!
Craftsman12.jpg
I can identify with that knife Mel. I'm glad it's still employed.

Re: It's Sears Craftsman Thursday

Posted: Sun Nov 02, 2025 11:19 pm
by knife7knut
Doesnt hold an edge but keeps good time.

Re: It's Sears Craftsman Thursday

Posted: Mon Nov 03, 2025 2:15 pm
by tvic
Cool timepiece! I like that!

Re: It's Sears Craftsman Thursday

Posted: Fri Nov 07, 2025 3:05 am
by tvic
It’s late Thursday, but it’s still Thursday! :lol:

Re: It's Sears Craftsman Thursday

Posted: Fri Nov 07, 2025 6:30 pm
by rea1eye
tvic wrote: Fri Nov 07, 2025 3:05 am It’s late Thursday, but it’s still Thursday! :lol:
Those blades are just perfection.

Bob

Re: It's Sears Craftsman Thursday

Posted: Sun Nov 09, 2025 1:27 pm
by tvic
Thanks, Bob!

Re: It's Sears Craftsman Thursday

Posted: Fri Jan 02, 2026 1:19 am
by tvic
Surprised to find this little beauty came with a sheath and sharpener. I’ve searched high and low in Sears catalogs and can’t find this knife, First, in the 1980s Sears quit listing knives in their Fall/Winter, Summer or Christmas catalogs. Went to listing them in a special Power and Hand Tool catalog in the 1980s, and they are kinda sparse online. I’m just guessing based on numbers I’ve seen on the knives that this is late 1980s, early 1990s. The number on the tang is 95225.

Re: It's Sears Craftsman Thursday

Posted: Fri Jan 02, 2026 1:57 am
by Waukonda
tvic wrote: Fri Jan 02, 2026 1:19 am Surprised to find this little beauty
Excellent picture of a dandy knife!

Re: It's Sears Craftsman Thursday

Posted: Fri Jan 02, 2026 3:43 am
by Dinadan
That lockback is a fine looking knife, Tim. A little time capsule!

Re: It's Sears Craftsman Thursday

Posted: Fri Jan 02, 2026 9:43 pm
by ScoutKnives
Not Thursday sorry , I post when I have the time ::facepalm::
One of my everyday carries , a 9552 .
Not sure of the age but I have the feeling it’s a 1960s - 70s era ?

Thanks for looking .
Mike

Re: It's Sears Craftsman Thursday

Posted: Fri Jan 02, 2026 10:02 pm
by rea1eye
ScoutKnives wrote: Fri Jan 02, 2026 9:43 pm Not Thursday sorry , I post when I have the time ::facepalm::
One of my everyday carries , a 9552 .
Not sure of the age but I have the feeling it’s a 1960s - 70s era ?

Thanks for looking .
Mike
Very nice knife. I have a Craftsman that has a similar shield.

Bob

Re: It's Sears Craftsman Thursday

Posted: Fri Jan 02, 2026 10:04 pm
by rea1eye
tvic wrote: Fri Jan 02, 2026 1:19 am Surprised to find this little beauty came with a sheath and sharpener. I’ve searched high and low in Sears catalogs and can’t find this knife, First, in the 1980s Sears quit listing knives in their Fall/Winter, Summer or Christmas catalogs. Went to listing them in a special Power and Hand Tool catalog in the 1980s, and they are kinda sparse online. I’m just guessing based on numbers I’ve seen on the knives that this is late 1980s, early 1990s. The number on the tang is 95225.
Craftsman that is in very good shape.

Enjoy it!

Bob

Re: It's Sears Craftsman Thursday

Posted: Thu Jan 15, 2026 4:46 pm
by tvic
ScoutKnives wrote: Fri Jan 02, 2026 9:43 pm Not Thursday sorry , I post when I have the time ::facepalm::
One of my everyday carries , a 9552 .
Not sure of the age but I have the feeling it’s a 1960s - 70s era ?

Thanks for looking .
Mike
Yep, you’re right on the logo years, Mike! Good looking knife there!

Here one of my recent acquisitions.

Re: It's Sears Craftsman Thursday

Posted: Thu Jan 15, 2026 5:52 pm
by toomanyknives
tvic wrote: Thu Jan 15, 2026 4:46 pm
ScoutKnives wrote: Fri Jan 02, 2026 9:43 pm Not Thursday sorry , I post when I have the time ::facepalm::
One of my everyday carries , a 9552 .
Not sure of the age but I have the feeling it’s a 1960s - 70s era ?

Thanks for looking .
Mike
Yep, you’re right on the logo years, Mike! Good looking knife there!

Here one of my recent acquisitions.
That's a real beaut, Tim! Here's a recent Craftsman favorite of mine for Craftsman Thursday.. It was missing the shield, so until I can get one, this brass will have to suffice..
Craftsman 8OT 3.JPG

Re: It's Sears Craftsman Thursday

Posted: Thu Jan 15, 2026 7:23 pm
by OLDE CUTLER
I have this pair of camper/scout type folders.
9555 stainless 5 blade
IMG_6372.JPG
9549 4 blade
IMG_6373.JPG

Re: It's Sears Craftsman Thursday

Posted: Thu Jan 15, 2026 11:23 pm
by FRJ
What very cool knives and a very fine watch I might add.

I had to take these pictures by the light of a lamp but here it is.
One of my favorite knives.
A nice old hunter with a locking clip and a formidable spey. ____ EDIT: it is a spear blade.
No numbers on the tangs.