All About Pocket Knives

Madmarco wrote: ↑Mon Mar 01, 2021 11:03 pm My knife for today is an inexpensive lockback folder by Columbia that I ordered from an Asian site just because I liked it's design! This one is 8 3/4" oal/SS drop-point blade minus a n/n cuz it's wide enough to pinch open, SS modified Maltese bolsters with faux MOP inserts in the bottom one's, SS liners, brass pins and inlays, black ABS covers, and extended lanyard hole. Weighs about 6 oz.'s, and only factory sharpened. Bears Columbia logo and wording etches, and model number front tang stamp. Certainly could be used, although, for me it's just a showpiece! 8)WIN_20210301_16_47_23_Pro.jpg

Madmarco wrote: ↑Tue Mar 02, 2021 2:49 am

samb1955 wrote: ↑Tue Mar 02, 2021 2:39 am I own two ar 15's now but I should have kept the Galil. It would cycle the cheapest 223 and I can't say that for the ar's.

Wish I knew what "cycle the cheapest 223" means, but O.K.!

WillyCamaro wrote: ↑Tue Mar 02, 2021 5:43 am

Madmarco wrote: ↑Tue Mar 02, 2021 2:26 am

samb1955 wrote: ↑Tue Mar 02, 2021 12:43 am

That rifle looks like a Galil I used to have, made in Israel. I've been wrong before but I like the knife anyway.

Thanks Sam! You could be 100% correct regarding the rifle, living up here in Canada we don' have anywhere near the exposure to firearms that you guys in the US do, so I said AR strictly based on the shape of the stock, but if you've owned the weapon I'm sure your assessment is more accurate than mine. Thx for the correction, and new information(to me)about rifle models!

Yesir mate, that tis a Grail, not a AR-15 (Armalite Rifle-15).

It's not hard to understand, when we see rifles in this style, to call them an "AR".
AR-15 was the father of the M16, and we all know where that became famous...

AR-15 is just the model number, not the rifle type.
It's like calling the Lee Enfield, K98, Garand, M14, Lebel, M1917; a Mauser. It's just the styling, not the exact rifle itself.

If one wants to know, what tis an actual assault rifle, just look up the Stg 44. That tis a genuine assault rifle.

Modern definitions are murky . One needs to go back, and learn the history/origins of the assault rifle. Then we wouldn't have all these problems with uneducated people, being misled on lousy definitions.

A true assault rifle, basically boils down too: Selective fire from single, semi, and fully automatic. Be a personal weapon. Have a large magazine capacity. Be designed for short, to medium combat ranges. And use a medium powered cartridge (bullet & casing).
It tis a soldier's personal combat rifle, not a rifle in of itself.

Hope that helps a bit Markie, online searching is your best friend in this case.

WillyCamaro wrote: ↑Tue Mar 02, 2021 5:46 am

Madmarco wrote: ↑Mon Mar 01, 2021 11:03 pm My knife for today is an inexpensive lockback folder by Columbia that I ordered from an Asian site just because I liked it's design! This one is 8 3/4" oal/SS drop-point blade minus a n/n cuz it's wide enough to pinch open, SS modified Maltese bolsters with faux MOP inserts in the bottom one's, SS liners, brass pins and inlays, black ABS covers, and extended lanyard hole. Weighs about 6 oz.'s, and only factory sharpened. Bears Columbia logo and wording etches, and model number front tang stamp. Certainly could be used, although, for me it's just a showpiece! 8)WIN_20210301_16_47_23_Pro.jpg

Really good lookin' folder today Marko.
Styling appeals to me, my kind of knife.


Yup, Columbia makes some purty good, wallet friendly cutlery. Inexpensive, and good, that's a fine combo in my book.

samb1955 wrote: ↑Tue Mar 02, 2021 11:22 am

Madmarco wrote: ↑Tue Mar 02, 2021 2:49 am

samb1955 wrote: ↑Tue Mar 02, 2021 2:39 am I own two ar 15's now but I should have kept the Galil. It would cycle the cheapest 223 and I can't say that for the ar's.

Wish I knew what "cycle the cheapest 223" means, but O.K.!

Not jamming up using cheap steel cased ammo. There is only one thing better than a sale on ammo and that's a sale on beer!

Madmarco wrote: ↑Tue Mar 02, 2021 6:38 pm I'm going with this non-folding FIXED blade stiletto today as my companion! It's the longer of 2 non-folding FIXED blade stilettos I own, the smaller being 9" oal, and this one 11" oal. I bought this knife from a fellow member's online store well before I knew he was a member here, and due to it arriving damaged we got into an argument regarding the damage. Fortunately, we were able to come to a compromise and things worked out. This knife is marked "Rosco" and was built in Japan, and has a SS bayonet blade with extended ricasso, NS flat-guard bolsters, brass liners and pins, and black ABS covers. The 9" model is built identically but is marked "O.M.O.R.", and was also built in Japan. Approximate weight of 4 oz.'s, and has never been sharp. I owned the 9" model before this one, but as soon as I found this knife online I ordered it so as to complete the set. Both are pretty much only letter openers, but since I'd never seen a non-folding FIXED blade stiletto, I wanted them. The 2nd pic shows both knives for comparison! 8)WIN_20210302_12_30_44_Pro.jpgWIN_20210302_12_31_23_Pro.jpg

Madmarco wrote: ↑Wed Mar 03, 2021 4:44 pm Thanks Smitty! I thought they were so cool because I'd never seen a non-folding stiletto before those two. A seller that I bought some of my autos from had a Latama non-folding stiletto with gorgeous cream colored horn covers, and the entire knife was in much better condition than my two, and it had a price of US$500., and he got it! Don't know if you know or not, but Latama is a well known knifemaker that builds beautiful, quality autos. Some of their older flat-guard picklocks sell for big bucks to this day.

Madmarco wrote: ↑Tue Mar 02, 2021 6:38 pm I'm going with this non-folding FIXED blade stiletto today as my companion! It's the longer of 2 non-folding FIXED blade stilettos I own, the smaller being 9" oal, and this one 11" oal. I bought this knife from a fellow member's online store well before I knew he was a member here, and due to it arriving damaged we got into an argument regarding the damage. Fortunately, we were able to come to a compromise and things worked out. This knife is marked "Rosco" and was built in Japan, and has a SS bayonet blade with extended ricasso, NS flat-guard bolsters, brass liners and pins, and black ABS covers. The 9" model is built identically but is marked "O.M.O.R.", and was also built in Japan. Approximate weight of 4 oz.'s, and has never been sharp. I owned the 9" model before this one, but as soon as I found this knife online I ordered it so as to complete the set. Both are pretty much only letter openers, but since I'd never seen a non-folding FIXED blade stiletto, I wanted them. The 2nd pic shows both knives for comparison! 8)WIN_20210302_12_30_44_Pro.jpgWIN_20210302_12_31_23_Pro.jpg

toomanyknives wrote: ↑Thu Mar 04, 2021 3:06 am That's a classy looking piece right there, Marco! A functional piece of art!

WillyCamaro wrote: ↑Thu Mar 04, 2021 4:32 am Markie, you've been posting some winning cutlery sir, mighty fine collection you have.
But... Dang man! I think you've just topped them all, stunning knife mate!

If you every want to sell, let me know, I'll take her in a heart beat 'n a half...

Quick Steel wrote: ↑Thu Mar 04, 2021 9:12 am Marco, I may just start calling you Mr. Excitment. Yet another striking piece of cutlery. Congratulations.

Madmarco wrote: ↑Thu Mar 04, 2021 4:59 pm

WillyCamaro wrote: ↑Thu Mar 04, 2021 4:32 am Markie, you've been posting some winning cutlery sir, mighty fine collection you have.
But... Dang man! I think you've just topped them all, stunning knife mate!

If you every want to sell, let me know, I'll take her in a heart beat 'n a half...

Thank you Willy for your kind sentiments! The chances of me parting with this one are slim, but, they can be found fairly easily on Ebay or possibly Amazon, and being a fixed blade you'd have no Customs problems. Best of luck should you try getting one, I guarantee you won't be disappointed!