Page 305 of 307
Re: Guns & Gun Related Stuff
Posted: Sun Mar 09, 2025 5:06 pm
by ken98k
Rockingkj wrote: ↑Sun Mar 09, 2025 11:09 am
Went to a military relic show today. Not into military stuff but this little show other things do show up. Traded some military knives I had bought to sell trade for these two antique muzzleloaders. Top full stock rifle is approximately .32 cal and marked on the barrel “G Biddel”. The second rifle is approximately .40 cal and marked “H PETER” on top of the barrel and has a “G. Goulcher” lock. Bores are dark but no significant pitting. Some added copper shielding to both which does hide some wood loss and a repair on the Biddel. Looking forward to taking em out and making them roar again
IMG_8248.jpeg
Gorgeous wood!

Re: Guns & Gun Related Stuff
Posted: Sun Mar 09, 2025 10:52 pm
by zp4ja
[quote=ken98k post_id=1183642 time=1741539836 user_id=15140]
[quote=zp4ja post_id=1183566 time=1741491193 user_id=13871]
Very nice Ken.
8" barrel?
Jerry
[/quote]
8 3/8"
[/quote]
Nice Ken.
Jerry
Re: Guns & Gun Related Stuff
Posted: Sun Mar 09, 2025 10:58 pm
by FRJ
Rockingkj wrote: ↑Sun Mar 09, 2025 11:09 am
Went to a military relic show today. Not into military stuff but this little show other things do show up. Traded some military knives I had bought to sell trade for these two antique muzzleloaders. Top full stock rifle is approximately .32 cal and marked on the barrel “G Biddel”. The second rifle is approximately .40 cal and marked “H PETER” on top of the barrel and has a “G. Goulcher” lock. Bores are dark but no significant pitting. Some added copper shielding to both which does hide some wood loss and a repair on the Biddel. Looking forward to taking em out and making them roar again
IMG_8248.jpeg
Those are gorgeous looking old guns!
I hope they work well for you.

Re: Guns & Gun Related Stuff
Posted: Sun Mar 09, 2025 11:48 pm
by Rockingkj
FRJ wrote: ↑Sun Mar 09, 2025 10:58 pm
Rockingkj wrote: ↑Sun Mar 09, 2025 11:09 am
Went to a military relic show today. Not into military stuff but this little show other things do show up. Traded some military knives I had bought to sell trade for these two antique muzzleloaders. Top full stock rifle is approximately .32 cal and marked on the barrel “G Biddel”. The second rifle is approximately .40 cal and marked “H PETER” on top of the barrel and has a “G. Goulcher” lock. Bores are dark but no significant pitting. Some added copper shielding to both which does hide some wood loss and a repair on the Biddel. Looking forward to taking em out and making them roar again
IMG_8248.jpeg
Those are gorgeous looking old guns!
I hope they work well for you.
Thanks. Have to get a .32 jag before I can try shooting that one.
Re: Guns & Gun Related Stuff
Posted: Mon Mar 10, 2025 9:33 am
by Miller Bro's
Rockingkj wrote: ↑Sun Mar 09, 2025 11:09 am
Went to a military relic show today. Not into military stuff but this little show other things do show up. Traded some military knives I had bought to sell trade for these two antique muzzleloaders.........
Nice looking guns!

Re: Guns & Gun Related Stuff
Posted: Mon Mar 10, 2025 12:08 pm
by Rockingkj
Thanks! I’m susceptible to two versions of kryptonite , sharp objects and muzzleloaders.
Re: Guns & Gun Related Stuff
Posted: Tue Mar 11, 2025 1:02 am
by ken98k
Rockingkj wrote: ↑Mon Mar 10, 2025 12:08 pm
Thanks! I’m susceptible to two versions of kryptonite , sharp objects and muzzleloaders.

Re: Guns & Gun Related Stuff
Posted: Sat Mar 29, 2025 4:49 pm
by OLDE CUTLER
A while back in this thread. I pictured a gray Ruger Wrangler 22lr single action with a 7 and 1/2 inch barrel. I have been shooting it for a few months, but was not happy with the way it shot. It would shoot a decent group, but the point of impact was a considerable point to the left of where the fixed sights were looking. I contacted Ruger about this and they gave me authorization to send it in for repairs. With the point of impact being to the far left as it was, the obvious problem when looking at the sights was that the front sight leaned to the right. This would have been caused by not fitting the barrel correctly at the factory. I received word from Ruger that they would not be fixing the old one, but would be replacing it with a new one which I received yesterday. While one could say that Ruger customer service worked correctly in fixing this, one could also say that Ruger quality control should never have let that one out for sale.
Re: Guns & Gun Related Stuff
Posted: Mon Mar 31, 2025 8:58 pm
by Unk
A buddy had this re-production Gen 1 Glock P80 for sale, so I took it off his hands. Basically a new Glock 17 with some of the Gen 1 P80 details. Has a new/ old "tupperware" case with it.
Re: Guns & Gun Related Stuff
Posted: Wed Apr 02, 2025 3:12 pm
by ken98k
Unk wrote: ↑Mon Mar 31, 2025 8:58 pm
A buddy had this re-production Gen 1 Glock P80 for sale, so I took it off his hands. Basically a new Glock 17 with some of the Gen 1 P80 details. Has a new/ old "tupperware" case with it.

I bought a Glock 19X last year and have been very happy with it.
Re: Guns & Gun Related Stuff
Posted: Wed Apr 02, 2025 4:42 pm
by robpa
Over the years Ive heard a LOT of people baf mouth Glocks, then they ended up getting one and, then many times another and so on.
Re: Guns & Gun Related Stuff
Posted: Thu Apr 03, 2025 2:42 am
by ken98k
robpa wrote: ↑Wed Apr 02, 2025 4:42 pm
Over the years Ive heard a LOT of people baf mouth Glocks, then they ended up getting one and, then many times another and so on.
I never had any interest in them until I saw this one.

- Glock 19X.jpg (37.2 KiB) Viewed 1460 times
Re: Guns & Gun Related Stuff
Posted: Fri Apr 11, 2025 1:00 am
by New_Windsor_NY
Do not freak out, I received permission from the management to post this FOR SALE ad.
I have this Remington Rand slide for a 45 caliber, M1911A1 automatic pistol for sale. The left side of the slide has the two-line Remington Rand & address. The "P" proof mark is on the top, and to the rear of the slide. Just above the rear sight. It also has the letter "G" (Government Contract Order?) when the firing pin guard is removed. Overall, this Remington Rand slide is in VERY GOOD condition. I am NOT the original owner of this slide. This slide was on my .45 (Colt) when I obtained it. However, I wanted a Colt slide. I found a Colt slide, and I bought the Colt slide. I have had this Remington Rand slide, safely stored, for 20 years. F.Y.I., my .45 Colt's serial number group, per the Colt archives, was manufactured in 1942. I am asking $430.00, shipping by USPS Priority Mail is included. Payment through PayPal Friends & Family preferred. Payment by postal money order might be considered. Reply by PM ONLY. Thank you.
Caption(s), if any, are on the BOTTOM of the corresponding picture(s).
Click on a picture to ENLARGE.
*****THE M1911A1 BOOKLET IS JUST FOR THE BACKGROUND, AND IT IS NOT FOR SALE.*****
***** L

K AT MY VERY NEXT POST ALSO ***** L

K AT MY VERY NEXT POST ALSO ***** L

K AT MY VERY NEXT POST ALSO
Re: Guns & Gun Related Stuff
Posted: Sat Apr 12, 2025 4:30 pm
by New_Windsor_NY
CONTINUED FROM MY PREVIOUS POST.....
Here, for a LIMITED time, is an ORIGINAL pair of Remington Rand M1911A1 pistol grips. The pair does come with the four, what I assume are the original screws. You can't really tell from the pictures, but each grip is a dark brown in color. I am by no means an expert on grip material, but this pair of grips appears to be made of either plastic(?) OR bakelite(?) Each grip is in EXCELLENT condition, with NO cracks, NO chips, and with NO visible wear. Each grip, has embossed on the back, a star with the letter "K" in the center, followed by the number "18" These two Remington Rand grips were safely stored for 20 years, along with the above posted Remington Rand slide. If you do purchase the above posted Remington Rand slide, I will include this pair of Remington Rand grips at NO ADDITIONAL CHARGE. I will NOT sell these grips separately! PLEASE DO NOT ASK.
Caption(s), if any, are on the BOTTOM of the corresponding picture(s).
Click on a picture to ENLARGE.
From a "1911" forum.....
"Remington Rand used Keyes grips throughout production. The Keyes grips can be identified by a K in a star on the back of the grip, along with a mold number. The early Keyes grips did not have a reinforcing ring around the screw hole....."
Re: Guns & Gun Related Stuff
Posted: Thu Apr 17, 2025 7:15 pm
by New_Windsor_NY
CONTINUED FROM MY TWO PREVIOUS POSTS.....
Here, also for a LIMITED time only, is an ORIGINAL, BOYT -42- holster. I have never actually used it, but my M1911A1 fits in it perfectly. It is a black, genuine leather holster. It measures 10 3/8" long (with the flap closed), 5" wide at the widest (the top) and gradually tapering down in width, to the bottom. It says "US" inside a double oval on the front of the flap. On the back of the holster, between the belt slots, it says, "BOYT -42-" It is a right side, right handed holster. There are two ways of wearing the holster. With a belt through the two, 2 1/8" long belt slots. Or, attached to the grommets on a "military style" web belt. Overall, this holster is in VERY GOOD+ condition. The front shows very little wear. The back shows very little wear, but does have a few minor scratches. The inside of the holster shows some minor wear. ALL of the stitching is present and intact. The four rivets are ALL present and intact. This holster, along with the pair of previously posted Remington Rand grips, and the previously posted Remington Rand slide, were ALL safely stored for 20 years. If you do purchase the previously posted Remington Rand slide, which will also include the pair of Remington Rand grips, I will also include this BOYT -42- holster at NO ADDITIONAL CHARGE. I will NOT sell this holster separately! PLEASE DO NOT ASK. I am asking $430.00, shipping by USPS Priority Mail is included. Payment through PayPal Friends & Family preferred. Payment by postal money order might be considered. Reply by PM ONLY. Thank you.
Caption(s), if any, are on the BOTTOM of the corresponding picture(s).
Click on a picture to ENLARGE.
***** The very last side by side picture, shows the holster with my M1911A1 inside it. One picture is with the flap open, and the other picture is with the flap closed. THE GUN IS NOT FOR SALE. I'LL REPEAT THIS - THE GUN IS NOT FOR SALE!!! *****
Re: Guns & Gun Related Stuff
Posted: Fri Apr 18, 2025 12:52 am
by doglegg
New_Windsor_NY wrote: ↑Thu Apr 17, 2025 7:15 pm
CONTINUED FROM MY TWO PREVIOUS POSTS.....
Here, also for a LIMITED time only, is an ORIGINAL, BOYT -42- holster. I have never actually used it, but my M1911A1 fits in it perfectly. It is a black, genuine leather holster. It measures 10 3/8" long (with the flap closed), 5" wide at the widest (the top) and gradually tapering down in width, to the bottom. It says "US" inside a double oval on the front of the flap. On the back of the holster, between the belt slots, it says, "BOYT -42-" It is a right side, right handed holster. There are two ways of wearing the holster. With a belt through the two, 2 1/8" long belt slots. Or, attached to the grommets on a "military style" web belt. Overall, this holster is in VERY GOOD+ condition. The front shows very little wear. The back shows very little wear, but does have a few minor scratches. The inside of the holster shows some minor wear. ALL of the stitching is present and intact. The four rivets are ALL present and intact. This holster, along with the pair of previously posted Remington Rand grips, and the previously posted Remington Rand slide, were ALL safely stored for 20 years. If you do purchase the previously posted Remington Rand slide, which will also include the pair of Remington Rand grips, I will also include this BOYT -42- holster at NO ADDITIONAL CHARGE. I will NOT sell this holster separately! PLEASE DO NOT ASK. I am asking $430.00, shipping by USPS Priority Mail is included. Payment through PayPal Friends & Family preferred. Payment by postal money order might be considered. Reply by PM ONLY. Thank you.
Caption(s), if any, are on the BOTTOM of the corresponding picture(s).
Click on a picture to ENLARGE.
***** The very last side by side picture, shows the holster with my M1911A1 inside it. One picture is with the flap open, and the other picture is with the flap closed. THE GUN IS NOT FOR SALE. I'LL REPEAT THIS - THE GUN IS NOT FOR SALE!!! *****
A treasure Skip. Congrats on having it
Re: Guns & Gun Related Stuff
Posted: Fri Apr 18, 2025 1:00 am
by New_Windsor_NY
doglegg wrote: ↑Fri Apr 18, 2025 12:52 am
A.....
Thank you, Floyd.

Re: Guns & Gun Related Stuff
Posted: Sat Apr 19, 2025 9:00 pm
by New_Windsor_NY
CONTINUED FROM MY THREE PREVIOUS POSTS.....
I PROMISE, this is the VERY LAST item that will be added to this FOR SALE group of items.
Here, also for a LIMITED time only, is a NEAR MINT, copyright 1994, 263 pages, "Guns, Crime, and Freedom", hardcover book. Authored by Wayne LaPierre, who was the CEO and Executive Vice President of the National Rifle Association of America (NRA), a position he held between the years 1991 and 2024. The foreword is by author Tom Clancy. Also included with the book, is an unused, unattached bookplate, signed simply, "Wayne" This particular book has been boxed and safely stored since I received it, 30 years ago. I have another copy or edition that is on my bookshelf. If you purchase the previously posted Remington Rand slide, which will also include the previously posted pair of Remington Rand grips, and which will also include the previously posted BOYT -42- holster, I will include this book at NO ADDITIONAL CHARGE. I will NOT sell this book separately! PLEASE DO NOT ASK. I am asking $430.00, shipping by USPS Priority Mail is included. Payment through PayPal Friends & Family preferred. Paying by postal money order may be considered. Reply by PM ONLY. Thank you.
Caption(s), if any, are on the BOTTOM of the corresponding picture(s).
Click on a picture to ENLARGE.
Re: Guns & Gun Related Stuff
Posted: Sun Apr 20, 2025 3:30 pm
by New_Windsor_NY
MY EASTER SUNDAY REDUCED ASKING PRICE OFFER HAS EXPIRED.
But the PREVIOUSLY POSTED items are STILL FOR SALE.
They are.....
The Remington Rand M1911A1 slide with firing pin, and firing pin spring.
The Remington Rand M1911A1 grips with four screws.
The Boyt -42- M1911A1 holster.
The Wayne LaPierre, "Guns, Crime, and Freedom", N.R.A. book.
ALL four items for $430, with USPS Priority Mail included.
Payment through PayPal Friends & Family preferred.
Payment by postal money order may be considered.
Personal checks will NOT be considered.
Reply by PM ONLY. Thank you.
Re: Guns & Gun Related Stuff
Posted: Sun Apr 20, 2025 11:28 pm
by ken98k
I put a link to your slide on the 1911 board, I guess no one has responded.
Re: Guns & Gun Related Stuff
Posted: Mon Apr 21, 2025 12:00 am
by New_Windsor_NY
ken98k wrote: ↑Sun Apr 20, 2025 11:28 pm
I.....
Thank you, Ken.

Re: Guns & Gun Related Stuff
Posted: Fri May 02, 2025 11:15 pm
by New_Windsor_NY
MY, WHY DO YOU CARE WHY, ASKING PRICE REDUCTION.
THIS ASKING PRICE REDUCTION LASTS UNTIL I DECIDE TO END IT.
This is what you'll receive.....
The Remington Rand M1911A1 slide with firing pin, and firing pin spring.
The Remington Rand M1911A1 pair of grips with four screws.
The Boyt -42- M1911A1 holster.
The Wayne LaPierre, "Guns, Crime, and Freedom", N.R.A. book.
ALL four items for $400, with USPS Priority Mail included.
Payment through PayPal Friends & Family preferred.
Payment by postal money order may be considered.
Personal checks will NOT be considered.
Reply by PM ONLY. Thank you.
***** ALL OF THE FOR SALE ITEMS MENTIONED ABOVE,
HAVE BEEN PREVIOUSLY POSTED, PICTURED, AND DESCRIBED *****
Re: Guns & Gun Related Stuff
Posted: Mon May 26, 2025 6:41 pm
by RedRaiderRick
Re: Guns & Gun Related Stuff
Posted: Tue May 27, 2025 1:13 am
by GSPTOPDOG
With ammo prices so high now this is getting too dang expensive to shoot....

Re: Guns & Gun Related Stuff
Posted: Thu Jun 05, 2025 12:41 pm
by 1967redrider
RedRaiderRick wrote: ↑Mon May 26, 2025 6:41 pm
20250405_163534.jpg20250405_163618.jpg
Sweet combo, RRR.

