Page 1 of 1

Schrade Copenhagen Model

Posted: Thu Jan 07, 2010 1:33 am
by 268bull
Picked up a Schrade+ Copenhagen series knife today. Have gone through my knife books and many pages here on the computer but can't seem to find much on the series. If anyone has some knowledge on when this series came out and a lockback number, I would greatly appreciate it. Thank you, Dale H.

Re: Schrade Copenhagen Model

Posted: Thu Jan 07, 2010 4:52 am
by ea42
Dale, Schrade made MANY knives with the Copenhagen logo, mostly during the early to mid 1990's. Yours sounds like an LB7. If you could post a pic I can likely narrow it down for you.

Eric

Re: Schrade Copenhagen Model

Posted: Thu Jan 07, 2010 5:50 am
by 268bull
ea42, I got a new camera and am having problems uploading pics at the moment. Not so sure though that the knife is a LB7. The handle measures 3 3/4 inches and the blade is 2 5/8 inches. Does the LB7 vary in length? There is a Copenhagen medallion embedded in the handle. The handle is black, saw cut Delrin I believe. It's a solidly built knife. Dale H.

Re: Schrade Copenhagen Model

Posted: Thu Jan 07, 2010 1:08 pm
by Chase
ea42 is right......Schrade did a lot of different knives with Copenhagen as well as Skoal. I have at least a dozen of each and at least 6 different models. Really gonna need a picture to help you further. If you can't post a picture...check the AAPK Stores for Schrade knives and see if you can at least see a picture of the style of the knife you have.

Tom

Re: Schrade Copenhagen Model

Posted: Thu Jan 07, 2010 3:16 pm
by orvet
Sounds like it may be a 5OT or even a LB-5. Both were 3-3/4 inches closed.
I haven't seen either of those patterns in black Delrin before, but that don't mean nothin'! :lol:
Either of those would probably look good in black Delrin, especially with brass bolsters, IMO. ::tu::

I am anxiously awaiting some pics! ::nod::

Dale

Re: Schrade Copenhagen Model

Posted: Thu Jan 07, 2010 3:42 pm
by 268bull
Had to resort back to my old camera, but hopefully here it is! Dale H.

Re: Schrade Copenhagen Model

Posted: Thu Jan 07, 2010 3:47 pm
by 268bull
That lockback is just one of four knives I picked up yesterday. It was a knife day! Dale H.

Re: Schrade Copenhagen Model

Posted: Thu Jan 07, 2010 4:44 pm
by orvet
Nice LB-5 Dale!
That is a good looking knife! ::tu:: ::tu::

I have not seen one of those before.

Dale

Re: Schrade Copenhagen Model

Posted: Thu Jan 07, 2010 5:18 pm
by 268bull
Thanks Dale. I'm thinking about going back to my source again this afternoon. There is an Ulster and a Sears I looked long and hard at yesterday. He handed me three boxes of knives to go thru, most of which are wore out. Dig deep though, the good ones settle at the bottom. LOL ::nod:: Dale H. Oh yeah, I forgot to metion the 8ot I passed on. That knife has strong snap!

Re: Schrade Copenhagen Model

Posted: Thu Jan 07, 2010 5:27 pm
by philco
By the time I dug mine out and photographed it, then got time to post the pic, 268Bull had posted his. Since I went to all that effort :roll: I'm gonna post mine anyway. :mrgreen:

They are a rock solid feeling little lockback. Somehow mine feels a bit more substantial than the regular LB 5 I have does.

Phil

Re: Schrade Copenhagen Model

Posted: Thu Jan 07, 2010 5:54 pm
by 268bull
Aren't they solid feeling Phil!! I passed on an 8 OT for this knife. Now I'm thinking I need to go back and get that knife. Dale H.

Re: Schrade Copenhagen Model

Posted: Thu Jan 07, 2010 6:58 pm
by Chase
I have an LB-7 LTD that looks just like youre LB-5 Phil with a few difference:

Size...it is an LB-7 ::dang::
Same Copenhagen Shield
Black treated Blade
GOLD "Copenhagen/SKOAL PRO RODEO" overlay on the blade
Black Leather Sheath

I'm going to try and scan a picture

Tom

Re: Schrade Copenhagen Model

Posted: Thu Jan 07, 2010 9:46 pm
by orvet
Nice knives.
I think that brass & black combo really looks sharp (pun not intended).

Dale :mrgreen:

Re: Schrade Copenhagen Model

Posted: Mon Feb 15, 2010 10:33 pm
by brady806
heres 1 of 4 i have, this one is built on a 33/34 frame.

Re: Schrade Copenhagen Model

Posted: Tue Feb 16, 2010 4:30 am
by BIGHEAD
I have three different ones they made with Copenhagen on them US Tobacco gave them away when you saved the lids off of Copenhagen cans and mailed them in to them.Until the government stuck their nose in my right to develop lip cancer if I wanted to ::disgust::

Re: Schrade Copenhagen Model

Posted: Tue Feb 16, 2010 5:23 am
by brady806
:lol: thats funny bighead!!!! i quite dipping cope about 10 years ago but still love to get a whiff of somebody elses can every once in a while. snuff can that is!!!! :shock:

the four i have (frame style) are; 12ot, 33ot,194ot,8ot
they are all black sawcut delrin,gold sheild and bolsters,with blade etches. sorry i dont have a picture of them individually. ill post this display with them located in the center above the jim bowie------------brady

Re: Schrade Copenhagen Model

Posted: Tue Feb 16, 2010 12:25 pm
by justold52
All this talk made me look for one also.

Here is my small jewel.


OOPS looks like I left some Ren-Wax in her.... :oops:

Re: Schrade Copenhagen Model

Posted: Sat Feb 20, 2010 12:34 pm
by woseyjales
Well Big, you probably would have stopped chewing anyway.
Takes a lot of practice to be able to spit while riding down
the road with a full face helmet on don't it?

Only Cope I have is the same 33 posted already.
Seems the 33 and 12 along with the trapper are most common.
that LB5 do seem like a convenient size to have on hand.
Knice catch! :mrgreen:

Re: Schrade Copenhagen Model

Posted: Sun Feb 21, 2010 4:45 am
by ea42
Here's one you don't see quite as often (but often enough to not make it a rare one):

Re: Schrade Copenhagen Model

Posted: Sun Feb 21, 2010 4:59 am
by woseyjales
Lawdy mercy Eric,
How many tin lids did you hafta mail in for a 165 ?? :mrgreen:

Re: Schrade Copenhagen Model

Posted: Sun Feb 21, 2010 6:23 am
by BIGHEAD
I have never seen that one :shock:

Re: Schrade Copenhagen Model

Posted: Sun Feb 21, 2010 8:58 pm
by brady806
ive seen it 2-3 times on ekbay, was never in the right place at the right time :roll: --i want one :x cope in my favorite pattern------------brady