Page 1 of 1
Can you use a metal stamp to mark your custom knives?
Posted: Tue Jan 02, 2018 8:31 pm
by Meridian_Mike
Hello all,
I want to put a simple "MT" mark and a
number on my hand-mades. Will a simple hand held metal stamp work for the high carbon steel blades or do I need some thing else?
Here is one I whipped out last weekend.
All I want to do is put my initials and a number.....
Any ideas?
Mike
Re: Can you use a metal stamp to mark your custom knives?
Posted: Tue Jan 02, 2018 9:15 pm
by Eye Brand Man
I stamp all my custom made knives that I make with letter stamp set I got from Jantz Supply, you know the kind the comes in the little wooden box with individual A-Z. Recently I ordered A custom stamp for a company on ebay with my initials and usa underneath. I got tired on trying to keep the indivdual stamps straight so I ordered the custom one so it's just one strike and done. The custom one is made from A2 tool steel Rc62 or so. All my blades are stamped on annealed (still soft not heat treated) 1084 or 1095. Basically stamp BEFORE heat treat. I don't no of any stamps that will work on heat treated steel(harder than say 54Rc). The stamp has to be considerably harder that the steel.
Re: Can you use a metal stamp to mark your custom knives?
Posted: Tue Jan 02, 2018 9:50 pm
by Eye Brand Man
Forgot to add. In your case I think etching would be your best bet. I think Jatnz sells a little etching kit.
Re: Can you use a metal stamp to mark your custom knives?
Posted: Wed Jan 03, 2018 2:27 pm
by Meridian_Mike
Yep, I guess I will have to look into the etching thing.
Thanks!!
Mike
Re: Can you use a metal stamp to mark your custom knives?
Posted: Wed Jan 03, 2018 3:30 pm
by XX Case XX
Meridian_Mike wrote:Hello all,
I want to put a simple "MT" mark and a number on my hand-mades. Will a simple hand held metal stamp work for the high carbon steel blades or do I need some thing else?
Here is one I whipped out last weekend.
IMG_2302.JPG
All I want to do is put my initials and a number.....
Any ideas?
Mike
Mike:
Check with Dale (Orvet) before you do anything. He has a machine that he uses to mark his blades. He might also be able to provide you with more information that could be helpful.
_________
Mike
Re: Can you use a metal stamp to mark your custom knives?
Posted: Wed Jan 03, 2018 3:34 pm
by Meridian_Mike
XX Case XX wrote:
Mike:
Check with Dale (Orvet) before you do anything. He has a machine that he uses to mark his blades. He might also be able to provide you with more information that could be helpful.
_________
Mike
COOL.... I will do that... Thanks so much for the suggestion.
Mike