Small Firearms.............
Posted: Sun Dec 30, 2018 6:23 pm
As I like small knives I am also attracted to small firearms. Thought I would post up a few from my modest accumulation.
I have always been in favor of a smaller but not necessarily under-powered pistol for everyday carry. One of my favorites was an over and under derringer chambered for .22 Magnum which had about the same ballistics as a .38 special. Sadly a friend of mine talked me out of it before I moved to Michigan.
When I do carry(which isn't frequently anymore)I have a Mk1 Detonics .45ACP. These were made many years ago when Detonics bought up a bunch of Government model Colt M1911's and modified them by cutting down the frame(holds 6 rounds);eliminating the grip safety and muzzle bushing and using a tapered barrel and a slide of their own manufacture.
These pre-dated the Officer's Model Colt by quite a few years and resulted in a .45 you could literally carry in your back pocket. The one I have is one of the first two hundred manufactured. Sadly they didn't sell well and the company went bankrupt.They tried to revive it several times but to no avail.
Another small pistol is the Baby Hammerless I got many years ago from the guy who conned me out of my derringer.Not sure who made it;there is a large letter K on the grips which may stand for Keystone although I have never really researched it.Chambered for .22 LR with a folding trigger and nickel plated I doubt it has ever been fired.
Another folding trigger model is of Belgian manufacture.Not sure of the maker or even what caliber it is(smaller than.22)it was given to me a long time ago.Seems to be tight but a lack of proper ammunition has caused me to relegate it to my collector status.
The Colt .25 auto was given to me by a co-worker when I attended a party at his house. He said it had belonged to his grandmother who ran a small grocery store and used to keep it under the counter for protection. When he gave it to me I discovered it was loaded(!). I fired it a few times but it is horribly inaccurate. The other thing I don't like about it is there is no indicator that the hammer is cocked and/or a round is in the chamber. It had a broken grip on it when I got it and the only grips I could find were thick pearl ones. Another safe queen.
The H&R 922 was given to me by my 91 year old aunt who was moving from New York to Florida and didn't want to take it with her and it was too hard to dispose of in NY state.Her husband had bought it new in the 1930's and had never fired it! Sitting in it's holster all these years(no damage)and perfect celluloid grips it remains unfired. When she gave it to me she apologized for not unloading it first but her arthritis prevented her from pulling the cylinder pin(which you have to remove to pull the cylinder and unload it).It will remain unfired.
The next one is a bit unusual in that it is a DEWAT(DEactivated WAr Trophy)Hotchkiss sub-machine gun that I bought many years ago.The receiver had been cut apart and a section removed to de-activate it.I had a section of black pipe made to fit the opening but not welded in.There is no bolt so it is still unserviceable. What I liked about it was how compact it was when folded.It was supposedly designed for paratroopers and folds very compactly.It has since been permanently affixed to a wall board.
The last item is one I actually have a couple of. They were made in Austria(exactly when I'm not sure)and fire 2mm pinfire cartridges.Sadly I don't have any ammo for them and am not sure that it is still available.One was missing the grips (which I made)when I got it. I also bought a third one which is made in Japan and fires blanks.
I have always been in favor of a smaller but not necessarily under-powered pistol for everyday carry. One of my favorites was an over and under derringer chambered for .22 Magnum which had about the same ballistics as a .38 special. Sadly a friend of mine talked me out of it before I moved to Michigan.
When I do carry(which isn't frequently anymore)I have a Mk1 Detonics .45ACP. These were made many years ago when Detonics bought up a bunch of Government model Colt M1911's and modified them by cutting down the frame(holds 6 rounds);eliminating the grip safety and muzzle bushing and using a tapered barrel and a slide of their own manufacture.
These pre-dated the Officer's Model Colt by quite a few years and resulted in a .45 you could literally carry in your back pocket. The one I have is one of the first two hundred manufactured. Sadly they didn't sell well and the company went bankrupt.They tried to revive it several times but to no avail.
Another small pistol is the Baby Hammerless I got many years ago from the guy who conned me out of my derringer.Not sure who made it;there is a large letter K on the grips which may stand for Keystone although I have never really researched it.Chambered for .22 LR with a folding trigger and nickel plated I doubt it has ever been fired.
Another folding trigger model is of Belgian manufacture.Not sure of the maker or even what caliber it is(smaller than.22)it was given to me a long time ago.Seems to be tight but a lack of proper ammunition has caused me to relegate it to my collector status.
The Colt .25 auto was given to me by a co-worker when I attended a party at his house. He said it had belonged to his grandmother who ran a small grocery store and used to keep it under the counter for protection. When he gave it to me I discovered it was loaded(!). I fired it a few times but it is horribly inaccurate. The other thing I don't like about it is there is no indicator that the hammer is cocked and/or a round is in the chamber. It had a broken grip on it when I got it and the only grips I could find were thick pearl ones. Another safe queen.
The H&R 922 was given to me by my 91 year old aunt who was moving from New York to Florida and didn't want to take it with her and it was too hard to dispose of in NY state.Her husband had bought it new in the 1930's and had never fired it! Sitting in it's holster all these years(no damage)and perfect celluloid grips it remains unfired. When she gave it to me she apologized for not unloading it first but her arthritis prevented her from pulling the cylinder pin(which you have to remove to pull the cylinder and unload it).It will remain unfired.
The next one is a bit unusual in that it is a DEWAT(DEactivated WAr Trophy)Hotchkiss sub-machine gun that I bought many years ago.The receiver had been cut apart and a section removed to de-activate it.I had a section of black pipe made to fit the opening but not welded in.There is no bolt so it is still unserviceable. What I liked about it was how compact it was when folded.It was supposedly designed for paratroopers and folds very compactly.It has since been permanently affixed to a wall board.
The last item is one I actually have a couple of. They were made in Austria(exactly when I'm not sure)and fire 2mm pinfire cartridges.Sadly I don't have any ammo for them and am not sure that it is still available.One was missing the grips (which I made)when I got it. I also bought a third one which is made in Japan and fires blanks.