Page 1 of 2

North woods Heritage jack (GEC 86)

Posted: Tue Jan 14, 2020 8:15 pm
by HighPlains
Attractive looking knife.

Listed cover materials, per KSF email, left to right:

OD Green canvas, FMW burlap, red sawcut, giraffe, mammoth.

Anyone know what the FMW burlap is? Looks like a white resin with natural burlap fibers. Haven’t seen anything like it before.

Re: North woods Heritage jack (GEC 86)

Posted: Tue Jan 14, 2020 10:29 pm
by Steve Warden
All nice, but that giraffe really caught my eye. Niiiiiiiiiiiiice!

Re: North woods Heritage jack (GEC 86)

Posted: Wed Jan 15, 2020 2:07 am
by 1967redrider
I'll Second that, they did an awesome job on the dye. ::tu:: ::tu::

Re: North woods Heritage jack (GEC 86)

Posted: Wed Jan 15, 2020 3:22 am
by Drukai
FMW Frosted Mini Wheats

Re: North woods Heritage jack (GEC 86)

Posted: Wed Jan 15, 2020 5:09 am
by HighPlains
Drukai wrote: Wed Jan 15, 2020 3:22 am FMW Frosted Mini Wheats
Too weird to be right, too accurate to be wrong :)

Re: North woods Heritage jack (GEC 86)

Posted: Wed Jan 15, 2020 10:47 am
by royal0014
::rotflol::
almost spewed coffee ...

Re: North woods Heritage jack (GEC 86)

Posted: Wed Jan 15, 2020 3:30 pm
by Sharpnshinyknives
That burlap Micarta is intriguing enough that I might try for one of those.
I sure hope the Giraffe bones are consistently like this one. It’s stressful trying to pick a good one and having it show up as not available when you check out.

Re: North woods Heritage jack (GEC 86)

Posted: Wed Jan 15, 2020 7:04 pm
by RAMROD
HighPlains wrote: Wed Jan 15, 2020 5:09 am
Drukai wrote: Wed Jan 15, 2020 3:22 am FMW Frosted Mini Wheats
Too weird to be right, too accurate to be wrong :)
That is what Jay Rouch called it. He had it special made for this run.

Re: North woods Heritage jack (GEC 86)

Posted: Wed Jan 15, 2020 9:14 pm
by Railsplitter
Well, did anybody get one?

Re: North woods Heritage jack (GEC 86)

Posted: Wed Jan 15, 2020 9:31 pm
by Cletus Awreetus
got a giraffe. tried for a 2nd, but pffft they was gawn..

Re: North woods Heritage jack (GEC 86)

Posted: Wed Jan 15, 2020 10:02 pm
by Sharpnshinyknives
You did way better than I did. I didn’t even get a straggler. Got some crazy message at the check out that the check out was busy. Wasted sooo much time hitting the try again button. Got to checkout w/ 6 different knives but alas none are coming to me.
They did have some good stragglers they put up.

Re: North woods Heritage jack (GEC 86)

Posted: Wed Jan 15, 2020 10:28 pm
by Drukai
I missed and was just trying for the FMW knife grrr..welp their is always next time :D

Re: North woods Heritage jack (GEC 86)

Posted: Thu Jan 16, 2020 12:33 pm
by RAMROD
Nothing again. ::td:: Something screwy with Paypal. ::uc:: I had 7 pending charges on my credit card, but no order confirmations. This morning I had 7 credits. ::shrug:: Not much time to figure out what the issue is in the moment and not really anyway to figure out what I did wrong. ::dang::

Re: North woods Heritage jack (GEC 86)

Posted: Thu Jan 16, 2020 3:29 pm
by Sharpnshinyknives
RAMROD wrote: Thu Jan 16, 2020 12:33 pm Nothing again. ::td:: Something screwy with Paypal. ::uc:: I had 7 pending charges on my credit card, but no order confirmations. This morning I had 7 credits. ::shrug:: Not much time to figure out what the issue is in the moment and not really anyway to figure out what I did wrong. ::dang::
I had that same trouble. I kept getting a message that the check out was busy, which caused me to lose the first Giraffe bone knife I had picked. Went back over and over and had 6 different knives through the check out and at the end, there was no knife.
Bohn needs to fix this. TKC started letting the buyer keep in his cart any knife that he picks and it’s there at check out. If they can do it, so can KSF. It is very frustrating for them to do things this way.

Re: North woods Heritage jack (GEC 86)

Posted: Thu Jan 16, 2020 4:33 pm
by HighPlains
RAMROD wrote: Wed Jan 15, 2020 7:04 pm
HighPlains wrote: Wed Jan 15, 2020 5:09 am
Drukai wrote: Wed Jan 15, 2020 3:22 am FMW Frosted Mini Wheats
Too weird to be right, too accurate to be wrong :)
That is what Jay Rouch called it. He had it special made for this run.
Awesome. Thank you for confirming. Is Jay doing all the planning for the Northwooss runs then?

Re: North woods Heritage jack (GEC 86)

Posted: Thu Jan 16, 2020 7:02 pm
by RAMROD
Sharpnshinyknives wrote: Thu Jan 16, 2020 3:29 pm
RAMROD wrote: Thu Jan 16, 2020 12:33 pm Nothing again. ::td:: Something screwy with Paypal. ::uc:: I had 7 pending charges on my credit card, but no order confirmations. This morning I had 7 credits. ::shrug:: Not much time to figure out what the issue is in the moment and not really anyway to figure out what I did wrong. ::dang::
I had that same trouble. I kept getting a message that the check out was busy, which caused me to lose the first Giraffe bone knife I had picked. Went back over and over and had 6 different knives through the check out and at the end, there was no knife.
Bohn needs to fix this. TKC started letting the buyer keep in his cart any knife that he picks and it’s there at check out. If they can do it, so can KSF. It is very frustrating for them to do things this way.
Derrick Bohn died a few months ago and Jay Rouch now runs the company. I agree there could be a better system for checkout, but probably would cost them some money to set up. Besides they will sellout in under 5 minutes as it is. They don't need to improve it in their minds I would guess.

Re: North woods Heritage jack (GEC 86)

Posted: Thu Jan 16, 2020 7:03 pm
by RAMROD
HighPlains wrote: Thu Jan 16, 2020 4:33 pm
RAMROD wrote: Wed Jan 15, 2020 7:04 pm
HighPlains wrote: Wed Jan 15, 2020 5:09 am

Too weird to be right, too accurate to be wrong :)
That is what Jay Rouch called it. He had it special made for this run.
Awesome. Thank you for confirming. Is Jay doing all the planning for the Northwooss runs then?
yes. Jay is the man.

Re: North woods Heritage jack (GEC 86)

Posted: Mon Jan 20, 2020 12:48 am
by Drukai
Jay was at the helm for Northwoods way before Derrick passed away. He is a great designer and knife maker in his own right.

Re: North woods Heritage jack (GEC 86)

Posted: Sat Feb 15, 2020 8:36 pm
by Drukai
Just traded for the FMW burlap Heritage Jack yesterday a great knife!

Re: North woods Heritage jack (GEC 86)

Posted: Tue Apr 28, 2020 1:04 am
by BuckSharp
The FMW is very unique. I’m wondering if they’ll do more knives with that cover or if it’ll be a one and done. Here’s my contribution to the HJ thread.
A174C7B0-EC25-46F0-B6D8-77174F6DC427.jpeg
3E129749-F8BA-4FC8-956B-9B10B11FD87B.jpeg

Re: North woods Heritage jack (GEC 86)

Posted: Fri May 01, 2020 5:24 pm
by gsmith7158
I picked up a Pretty nice Heritage in Mammoth today. I really like this pattern. It's a big hefty knife. ::nod::

Re: North woods Heritage jack (GEC 86)

Posted: Fri May 01, 2020 8:02 pm
by doglegg
Lovely. ::nod::

Re: North woods Heritage jack (GEC 86)

Posted: Fri May 01, 2020 9:23 pm
by gsmith7158
doglegg wrote: Fri May 01, 2020 8:02 pm Lovely. ::nod::
Thank you Floyd!

Re: North woods Heritage jack (GEC 86)

Posted: Fri Jul 10, 2020 9:23 pm
by julsblade
gsmith7158 wrote: Fri May 01, 2020 5:24 pm I picked up a Pretty nice Heritage in Mammoth today. I really like this pattern. It's a big hefty knife. ::nod::
Really like this one. I have an Oilfield jack from GEC but would like one like this one.

I wonder when they will make another batch of those Northwoods ::hmm::

Re: North woods Heritage jack (GEC 86)

Posted: Sat Jan 02, 2021 3:39 pm
by texoma
Wish GEC would have made some 86 single blades like the Northwoods Heritage Jack, it's a real nice knife for it's size, I'm glad I was able to get one. I doubt GEC will do another run anytime soon and the aftermarket prices are crazy high, I just saw a red sawcut go for $890 on eBay, I can't believe it, I think there's something fishy with that sale. ::skeptic::