Sheepsfoot Barlow in O1 with Smooth Bone Covers
Posted: Sat Apr 04, 2026 2:40 pm
Hello all and thanks for looking.
This one is the first finished of April, Sheepsfoot Barlow in O1 with Smooth Bourbon Bone covers.
Etched Nickel silver bolsters, pins and coin edged liners.
What are your thoughts? Do you like smooth bone or do you think all bone should be jigged?
The pull on this is what I would call a medium, The sheepsfoot makes it easy to pinch open,(See attached video), half stop, spring lays flat in all 3 positions and the tip is well centered.
Blade hand sanded to 600 grit finish.
OAL: 6"
Closed 3.45"
Cutting Edge: 2.35"
(this one is available, Private Message if interested)
(Questions, comments and feedback welcome.)
[youtube]https://youtu.be/to-BVk9Vswg?si=eHa2fGMSKwZtwchA[/youtube]
This one is the first finished of April, Sheepsfoot Barlow in O1 with Smooth Bourbon Bone covers.
Etched Nickel silver bolsters, pins and coin edged liners.
What are your thoughts? Do you like smooth bone or do you think all bone should be jigged?
The pull on this is what I would call a medium, The sheepsfoot makes it easy to pinch open,(See attached video), half stop, spring lays flat in all 3 positions and the tip is well centered.
Blade hand sanded to 600 grit finish.
OAL: 6"
Closed 3.45"
Cutting Edge: 2.35"
(this one is available, Private Message if interested)
(Questions, comments and feedback welcome.)
[youtube]https://youtu.be/to-BVk9Vswg?si=eHa2fGMSKwZtwchA[/youtube]