Case Classic Toenail Value?

The W.R. Case & Sons Cutlery Company has a very rich history that began in 1889 when William Russell (“W.R.”), Jean, John, and Andrew Case began fashioning their knives and selling them along a wagon trail in upstate New York. The company has produced countless treasures and it continues to do so as one of the most collected brands in the world.
Post Reply
User avatar
bonehead
Posts: 1292
Joined: Sun Jan 17, 2010 6:57 pm
Location: SC

Case Classic Toenail Value?

Post by bonehead »

Hi folks,

Came across this toenail a few days ago and put it on my watch list. Can anyone tell me why the value of this knife is so High? The seller mentions its a proto but I see nothing about this knife that makes it one. He says bolster etched with proto 00 but the only thing I see is the long tail C with 00 which was quite common on Csse classics. I cannot find it as a Case Classic in the Best in the Long Haul Case Classics book.

http://cgi.ebay.com/ws/eBayISAPI.dll?Vi ... K:MEWAX:IT
Bonehead

America's 'FINEST' Vintage Cutlery
6807
road_warri0r
Posts: 120
Joined: Fri Jan 15, 2010 2:00 am

Re: Case Classic Toenail Value?

Post by road_warri0r »

I questioned the seller on why he was calling it Proto and he informed me that the dealer who sold him the knives years ago told thim that the 00's on the bolster indicated a prototype. I explained to him the 0 or 00 or 000 indicated basically nothing other than the original buyer did not have it specifically serial numbered. Also it is clear on the end of the box in the auction add it says one of 80 which means it is a regular production. Regular production and Prototype never coincide. I suspected he might remove the word "proto" but so far it remains.
User avatar
gmusic
Posts: 3145
Joined: Tue Oct 04, 2005 7:27 pm
Location: Piute Mountains.
Contact:

Re: Case Classic Toenail Value?

Post by gmusic »

You are correct about the bolster serial # road. From what I understand it had nothing to with prototypes and was just one of those added touches usually at the request of the buyer. I would say the 1 of 80, the double elephant etch and the buyers lack of knowledge about the 00 is what ran the price up.

There is mention of Red Bone Corn Cob jigging on page 4 of the supplement, althought it doesn't give the number produced.
http://www.musicmadeknives.com

Rodger, (Rodger-50/2050), Bill (El Lobo), Johnny Fain (jonet143), Johnny Samples (Johnnyrotten),
Bill Price (CCBill)


Please feel free to contact any mod or admin with concerns.
User avatar
bonehead
Posts: 1292
Joined: Sun Jan 17, 2010 6:57 pm
Location: SC

Re: Case Classic Toenail Value?

Post by bonehead »

Thanks Guys,

When a fellow is informed about the details of his knife and will not come clean its a shame. For the love of the mighty $. I have him on my Poo List and would but anything for free from him.

Alan
Bonehead

America's 'FINEST' Vintage Cutlery
6807
Hghagan
Posts: 22
Joined: Thu Dec 27, 2007 8:32 am

Re: Case Classic Toenail Value?

Post by Hghagan »

I am not sure but I think the knife may be considered hard to find. Enlarge the photo with the tin it came in. It is one that the factory recalled because of the mistake in spelling of Pennsylvania. There probably not to many out there.
User avatar
gmusic
Posts: 3145
Joined: Tue Oct 04, 2005 7:27 pm
Location: Piute Mountains.
Contact:

Re: Case Classic Toenail Value?

Post by gmusic »

I just have the one. I believe Rodger (God bless his soul) had quite a few of them.
Attachments
DSC04316.JPG
http://www.musicmadeknives.com

Rodger, (Rodger-50/2050), Bill (El Lobo), Johnny Fain (jonet143), Johnny Samples (Johnnyrotten),
Bill Price (CCBill)


Please feel free to contact any mod or admin with concerns.
harrast
Posts: 9
Joined: Sun Nov 05, 2006 8:01 am
Location: Fort Collins.Co

Re: Case Classic Toenail Value?

Post by harrast »

bonehead wrote:Hi folks,

Came across this toenail a few days ago and put it on my watch list. Can anyone tell me why the value of this knife is so High? The seller mentions its a proto but I see nothing about this knife that makes it one. He says bolster etched with proto 00 but the only thing I see is the long tail C with 00 which was quite common on Csse classics. I cannot find it as a Case Classic in the Best in the Long Haul Case Classics book.

http://cgi.ebay.com/ws/eBayISAPI.dll?Vi ... K:MEWAX:IT
Hey Bonehead , I posted a picture of ther cert that should come with the knife , This should help you out on how many knives were etched I'm lucky enough to own one of the etched knives
Attachments
1-16-2011 2;59;38 PM.jpg
User avatar
bonehead
Posts: 1292
Joined: Sun Jan 17, 2010 6:57 pm
Location: SC

Re: Case Classic Toenail Value?

Post by bonehead »

Harrast,

Thanks for this info. So are these special additions part of the Case Classic series? I still can't find them in the book. I do know that there were many mistakes and updates to the book " Case Classics Best in the Long Haul " John Adams founder of Case Classics Club has posted a lot of new information on many of the updates but I did not see anything on these.

With what has been discussed here in these posts what is the underlying reason for the value, It seems there has been a number of diffent things disscussed.

1) Prototype?, which I do not think is correct.
2) Miss spelled PA. on the tin?
3) The fact that the tins were not approved by Case?
4) The rarity of the item in question?, which makes more sense than any other IMO.
5) Or a combination of the items above?

Thanks for the post, I'm learning everyday.... Alan
Bonehead

America's 'FINEST' Vintage Cutlery
6807
robinetn
Posts: 1441
Joined: Thu Jun 26, 2008 2:30 pm
Location: North East Tennessee

Re: Case Classic Toenail Value?

Post by robinetn »

gmusic wrote:I just have the one. I believe Rodger (God bless his soul) had quite a few of them.
That's the "Southern" Californie spelling of Pa.

Bob
User avatar
bonehead
Posts: 1292
Joined: Sun Jan 17, 2010 6:57 pm
Location: SC

Re: Case Classic Toenail Value?

Post by bonehead »

And I'm originally am from the north ::tu:: Oh Know.... ::ds::
Bonehead

America's 'FINEST' Vintage Cutlery
6807
User avatar
gmusic
Posts: 3145
Joined: Tue Oct 04, 2005 7:27 pm
Location: Piute Mountains.
Contact:

Re: Case Classic Toenail Value?

Post by gmusic »

Hey Mitch..................how is it spelled down there?

Actually the rednecks live up here! ::paranoid::
http://www.musicmadeknives.com

Rodger, (Rodger-50/2050), Bill (El Lobo), Johnny Fain (jonet143), Johnny Samples (Johnnyrotten),
Bill Price (CCBill)


Please feel free to contact any mod or admin with concerns.
Aimus Moses
Posts: 1129
Joined: Thu Sep 17, 2009 3:57 pm

Re: Case Classic Toenail Value?

Post by Aimus Moses »

Maybe they had Dan Quail working for them as a speller. Remember his spelling of P-O-T-A-T-O-E?

Aimus
harrast
Posts: 9
Joined: Sun Nov 05, 2006 8:01 am
Location: Fort Collins.Co

Re: Case Classic Toenail Value?

Post by harrast »

bonehead wrote:Harrast,

Thanks for this info. So are these special additions part of the Case Classic series? I still can't find them in the book. I do know that there were many mistakes and updates to the book " Case Classics Best in the Long Haul " John Adams founder of Case Classics Club has posted a lot of new information on many of the updates but I did not see anything on these.

With what has been discussed here in these posts what is the underlying reason for the value, It seems there has been a number of diffent things disscussed.

1) Prototype?, which I do not think is correct.
2) Miss spelled PA. on the tin?
3) The fact that the tins were not approved by Case?
4) The rarity of the item in question?, which makes more sense than any other IMO.
5) Or a combination of the items above?

Thanks for the post, I'm learning everyday.... Alan
Alan, See if you can find and buy the Case Classic Value Guide Update the knives your looking for will be in it.
User avatar
bonehead
Posts: 1292
Joined: Sun Jan 17, 2010 6:57 pm
Location: SC

Re: Case Classic Toenail Value?

Post by bonehead »

harrast wrote:
bonehead wrote:Harrast,

Thanks for this info. So are these special additions part of the Case Classic series? I still can't find them in the book. I do know that there were many mistakes and updates to the book " Case Classics Best in the Long Haul " John Adams founder of Case Classics Club has posted a lot of new information on many of the updates but I did not see anything on these.

With what has been discussed here in these posts what is the underlying reason for the value, It seems there has been a number of diffent things disscussed.

1) Prototype?, which I do not think is correct.
2) Miss spelled PA. on the tin?
3) The fact that the tins were not approved by Case?
4) The rarity of the item in question?, which makes more sense than any other IMO.
5) Or a combination of the items above?

Thanks for the post, I'm learning everyday.... Alan
Alan, See if you can find and buy the Case Classic Value Guide Update the knives your looking for will be in it.

harrast,

Got ya, All I have is the Oct 1998 Update.
Thanks! Alan
Bonehead

America's 'FINEST' Vintage Cutlery
6807
User avatar
Classic Case
Posts: 1225
Joined: Fri Feb 16, 2007 11:15 pm
Location: MI

Re: Case Classic Toenail Value?

Post by Classic Case »

Just on a side note, that CoA you posted didnt come with the knives when they were released, I have a whole set of 96's I bought on release,and not one came with that CoA.I'm not sure when that CoA came into existence.
Attachments
50.jpg
Chris - I'd give my right arm to be ambidexterous.
User avatar
bonehead
Posts: 1292
Joined: Sun Jan 17, 2010 6:57 pm
Location: SC

Re: Case Classic Toenail Value?

Post by bonehead »

Killer collection CC. Awesome knives ::tu::
Bonehead

America's 'FINEST' Vintage Cutlery
6807
Post Reply

Return to “Case Knife Collector's Forum”