Robeson Pocket-Eze Jack Restoration
- orvet
- Gold Tier

- Posts: 19902
- Joined: Tue May 16, 2006 6:23 am
- Location: Willamette Valley, Oregon
Robeson Pocket-Eze Jack Restoration
Here is another practice knife. I call them practice knives because I am still fine-tuning my hands after the surgery last year. IMO, my hands are still not back to 100%, but the practice knives are helping me develop alternative ways to work on the knives without stressing my hands as bad as I did with the old techniques I used.
Here is an old Robeson Pocket-Eze Jack that I reworked. Of course I forgot to take any pictures. Even hand sanding didn't remove all of the grinding marks on the blade, especially on the backside. The tang stamp on the front side of this knife is not a very visible except in good light with magnification. The rear tang stamp is much more visible showing the Robeson model number 882724. This also was a knife that had been rode hard and put away wet. The bolsters were dinged, the blade was ground on a grinder, the handles were shrinking and the secondary blade was pretty much used up. I would have put the shield back on the new handles, but the shield was worn so thin on one edge that it was almost fragile and part of the name was worn off.
I put ruby bone on this knife and remove the secondary blade and center liner. I took a lot of dings out of the bolsters but couldn't get all of the grinding marks off the blade without thinning it too much. The profile of the Pocket Eze design, especially with the secondary blade gone, makes for a very easy to carry, slim in the pocket user-friendly pattern. I also enlarged the cut out for the secondary blade to make a full easy open out of it. It makes the knife much easier to open.
Here is an old Robeson Pocket-Eze Jack that I reworked. Of course I forgot to take any pictures. Even hand sanding didn't remove all of the grinding marks on the blade, especially on the backside. The tang stamp on the front side of this knife is not a very visible except in good light with magnification. The rear tang stamp is much more visible showing the Robeson model number 882724. This also was a knife that had been rode hard and put away wet. The bolsters were dinged, the blade was ground on a grinder, the handles were shrinking and the secondary blade was pretty much used up. I would have put the shield back on the new handles, but the shield was worn so thin on one edge that it was almost fragile and part of the name was worn off.
I put ruby bone on this knife and remove the secondary blade and center liner. I took a lot of dings out of the bolsters but couldn't get all of the grinding marks off the blade without thinning it too much. The profile of the Pocket Eze design, especially with the secondary blade gone, makes for a very easy to carry, slim in the pocket user-friendly pattern. I also enlarged the cut out for the secondary blade to make a full easy open out of it. It makes the knife much easier to open.
Dale
AAPK Administrator
Please visit my AAPK store: www.allaboutpocketknives.com/orvet
Job 13:15
"Buy more ammo!" - Johnnie Fain
“Evil is Powerless If The Good are Unafraid.” – Ronald Reagan
AAPK Administrator
Please visit my AAPK store: www.allaboutpocketknives.com/orvet
Job 13:15
"Buy more ammo!" - Johnnie Fain
“Evil is Powerless If The Good are Unafraid.” – Ronald Reagan
- muskrat man
- Gold Tier

- Posts: 5684
- Joined: Fri Jun 30, 2006 4:04 am
- Location: Ohio
- Contact:
Re: Robeson Pocket-Eze Jack Restoration
I like that I always thought the little dogleg robys were pleasing to the eye
Custom knives, repair, restoration & embellishment
Certified Hubertus, Taylor, & Schrade repairman past and present
http://www.muskratmanknives.com
https://www.facebook.com/Muskratmanknives
Certified Hubertus, Taylor, & Schrade repairman past and present
http://www.muskratmanknives.com
https://www.facebook.com/Muskratmanknives
- TripleF
- Gold Tier

- Posts: 19613
- Joined: Mon Feb 14, 2011 3:42 pm
- Location: West Central FL
- Contact:
Re: Robeson Pocket-Eze Jack Restoration
Very knice Dale!! 
SCOTT
Colonial Knife Company History ebook:
https://gumroad.com/l/ZLDb
Blog: https://scottrauberoutdoors.wordpress.c ... e-26-2026/
Colonial Knife Company History ebook:
https://gumroad.com/l/ZLDb
Blog: https://scottrauberoutdoors.wordpress.c ... e-26-2026/
-
trutemper
- Posts: 443
- Joined: Fri Jul 01, 2011 2:55 am
Re: Robeson Pocket-Eze Jack Restoration
Dale
WOW! I love the deeper cutaway for the "easy open" function! It gave the entire knife a very sleek look. I just love what you`ve done with this one!
Bob
WOW! I love the deeper cutaway for the "easy open" function! It gave the entire knife a very sleek look. I just love what you`ve done with this one!
Bob
- biglmbass
- Posts: 926
- Joined: Sat Nov 06, 2010 11:41 pm
- Location: Alabama
Re: Robeson Pocket-Eze Jack Restoration
I like that.
Well done.
- whitebuffalo58
- Posts: 2743
- Joined: Tue Aug 17, 2010 2:35 am
- Location: SW MO Heart of the Ozarks
Re: Robeson Pocket-Eze Jack Restoration
Very nice Dale! Don't look like ya need no more practice to me, but hope you get to where you're feeling 100% again.
WB
WB
- glennbad
- Gold Tier

- Posts: 8178
- Joined: Mon May 15, 2006 11:13 am
- Location: NH
Re: Robeson Pocket-Eze Jack Restoration
That Ruby bone is sweet-looking!
Your practice knives = my best work.
Another home run...
Glenn
Your practice knives = my best work.
Another home run...
Glenn
- orvet
- Gold Tier

- Posts: 19902
- Joined: Tue May 16, 2006 6:23 am
- Location: Willamette Valley, Oregon
Re: Robeson Pocket-Eze Jack Restoration
Me too, though I find them even more pleasing to the hand. I have always liked the Robeson Pocket-Eze designs. It just seem to make sense that they would spend significant time and effort (money) in a design that is slim profile and comfortable to carry in the pants pocket where most men carry their knives.muskrat man wrote:I like that I always thought the little dogleg robys were pleasing to the eye
I am glad you all enjoyed the knife. These are easy to do, though you have to remember the radius on the bolsters when pinning them. Its not hard, just requires a bit more attention.
Don’t sell yourself short Glenn!glennbad wrote: Your practice knives = my best work.
Glenn
You take a backseat to no one when it comes to customizing knives!
Dale
AAPK Administrator
Please visit my AAPK store: www.allaboutpocketknives.com/orvet
Job 13:15
"Buy more ammo!" - Johnnie Fain
“Evil is Powerless If The Good are Unafraid.” – Ronald Reagan
AAPK Administrator
Please visit my AAPK store: www.allaboutpocketknives.com/orvet
Job 13:15
"Buy more ammo!" - Johnnie Fain
“Evil is Powerless If The Good are Unafraid.” – Ronald Reagan