Here's a pretty cool one

glennbad · Post by **glennbad** » Sat Apr 13, 2013 1:48 am

I'm starting to get caught up on some projects. Here is one I just finished. It's a lockback, but the cool thing is the release on it. You flip the lever up and use it push the spring out and release the blade. The owner wanted to do alot to it. He wanted new brass liners, NS bolsters, new scales, and a NS lever. I also ended up replacing the end piece, which the spring pushes against. It was actually wood, but I made a new one out of NS. The bone is Catalina Amber.

Here are some WIP pics.

More in next post...

glennbad · Post by **glennbad** » Sat Apr 13, 2013 1:55 am

This one was a bit challenging, as the pivot hole had to be perfectly placed, otherwise the spring would not lock up properly or the spring would not sit flush either. Had a couple trial holes before I got it right. The knife is slimmer now, but substantially beefier now.

Definitely one of the more interesting ones I have worked on.

Lawrence · Post by **Lawrence** » Sat Apr 13, 2013 2:07 am

Beautiful work!

Mr Rick · Post by **Mr Rick** » Sat Apr 13, 2013 2:34 am

Lawrence wrote:Beautiful work!

You can say that again!!

junebug · Post by **junebug** » Sat Apr 13, 2013 6:32 am

awesome glenn

big monk · Post by **big monk** » Sat Apr 13, 2013 6:54 am

You really do,some XXXXXXXNice work,Glenn !!!!!!!!

jerryd6818 · Post by **jerryd6818** » Sat Apr 13, 2013 9:41 am

Glen -- You just get better and better and better. Each time I think you can't improve on your latest project, you prove me wrong on the next one. Great job and an interesting knife.

Bret888 · Post by **Bret888** » Sat Apr 13, 2013 11:15 am

Great job Glenn!

tjmurphy · Post by **tjmurphy** » Sat Apr 13, 2013 11:19 am

Nice job Glenn

So you ended up making him a k-new k-nife and used his old blade??

whitebuffalo58 · Post by **whitebuffalo58** » Sat Apr 13, 2013 11:56 am

Beautiful job Glenn!

That'd be a great model to reproduce as a custom!

I'd love to have a set of patterns for one of those.

WB

glennbad · Post by **glennbad** » Sat Apr 13, 2013 11:49 pm

tjmurphy wrote:Nice job Glenn So you ended up making him a k-new k-nife and used his old blade??

Yeah, basically the only original parts are the blade and the spring...thanks.

glennbad · Post by **glennbad** » Sat Apr 13, 2013 11:52 pm

whitebuffalo58 wrote:Beautiful job Glenn!
That'd be a great model to reproduce as a custom! I'd love to have a set of patterns for one of those.

WB

I didn't even think of that.

I used the old parts as patterns for the new parts, and shipped everything back to the owner after...

whitebuffalo58 · Post by **whitebuffalo58** » Sun Apr 14, 2013 11:04 am

Yah, I did that on a few too, Glenn. Kinda gotten into the habit now of making a set of templates for any of the "cool" ones that I work on. I use 1/8" plexiglas and make a working model of them. The plexiglas even makes a functioning backspring.
Congrats again on another great rebuild!

WB

orvet · Post by **orvet** » Mon Apr 15, 2013 2:22 am

Very nice work Glenn!

A project like that is really a challenge, but also a good learning experience.
I re-worked a shell handle Colonial, about the second knife I repaired.
I ended up using only the spring and blade of the original knife.
Like you I had a couple adjustments, but it came out nice.

Speaking of patterns; I am trying to develop a habit of tracing each knife I have apart onto graph paper and noting original pin sized used as a reference so I don't confuse the sizes between knives when I have several works in progress at a time.
It has been helpful on several occasions. Since I traced the liners to the paper, I guess that could be useful as a pattern, at least for the liners & bolsters.

All About Pocket Knives

Here's a pretty cool one

Here's a pretty cool one

Re: Here's a pretty cool one

Re: Here's a pretty cool one

Re: Here's a pretty cool one

Re: Here's a pretty cool one

Re: Here's a pretty cool one

Re: Here's a pretty cool one

Re: Here's a pretty cool one

Re: Here's a pretty cool one

Re: Here's a pretty cool one

Re: Here's a pretty cool one

Re: Here's a pretty cool one

Re: Here's a pretty cool one

Re: Here's a pretty cool one