How do you remove those tiny scrathes on the bolsters?

Hazieview · Post by **Hazieview** » Sun Apr 14, 2013 5:46 pm

I have a couple Case Saddlehorn pocket knives that I recently polished with turtle wax chrome polish and a microfiber rag. It still leaves those little tiny scratches all over the bolsters. Is there any way to polish the bolsters to a mirror finish with no scratches?

Mr Rick · Post by **Mr Rick** » Sun Apr 14, 2013 5:56 pm

Hazieview wrote:I have a couple Case Saddlehorn pocket knives that I recently polished with turtle wax chrome polish and a microfiber rag. It still leaves those little tiny scratches all over the bolsters. Is there any way to polish the bolsters to a mirror finish with no scratches?

I've never tried it but I wonder if Jewelers Rouge would work.

http://www.amazon.com/Beadaholique-Jewe ... lers+rouge

Elvis · Post by **Elvis** » Mon Apr 15, 2013 11:31 am

I'd try using a finer abrasive like Flitz and an old T-shirt. From there it should be about a 5 minute job.

TripleF · Post by **TripleF** » Mon Apr 15, 2013 12:55 pm

Flitz and the polishing cloth they sell!!

Cutty · Post by **Cutty** » Mon Apr 15, 2013 1:23 pm

TripleF wrote:Flitz and the polishing cloth they sell!!

+1

wiseguy · Post by **wiseguy** » Tue Apr 16, 2013 3:14 am

if they`re deep i use 1500 up to 3000 wet sand paper from an autobody supply house . Then finish it off with "finekut" rubbing/polishing compound from the same place , its designed to polish the "clearcoat " thats sprayed over the basecoat of paint in automotive painting . as a member mentioned "jewelers rouge" is cerium oxide works also but usually sold by the pound and must be made into a paste . Goodluck

All About Pocket Knives

How do you remove those tiny scrathes on the bolsters?

How do you remove those tiny scrathes on the bolsters?

Re: How do you remove those tiny scrathes on the bolsters?

Re: How do you remove those tiny scrathes on the bolsters?

Re: How do you remove those tiny scrathes on the bolsters?

Re: How do you remove those tiny scrathes on the bolsters?

Re: How do you remove those tiny scrathes on the bolsters?