Forcing Patina

A place to ask or answer knife related questions.
Post Reply
Edgewise
Posts: 809
Joined: Fri Jun 01, 2007 3:34 pm

Forcing Patina

Post by Edgewise »

I've been reading all the old forced patina posts but can't find whether you immerse the whole knife to protect the tang and springs too or if that's a bad idea.
If not, how to protect the tangs under the bolster and springs on the inside of the handle?
If vinegar patina protects from rust then I'm guessing the whole knife can be immersed in it and blown dry after.
Has anyone ever immersed the whole closed folder in vinegar or anything else?
What happens if you soak a blade in vinegar for too long?
Any patina accidents out there that I can benefit from knowing about? (sorry about that last question but I need to know. ::shrug:: )
User avatar
philco
Gold Tier
Gold Tier
Posts: 15552
Joined: Sat Mar 22, 2008 9:32 pm
Location: Kentucky (Wildcat Country)

Re: Forcing Patina

Post by philco »

I made the mistake of immersing my entire knife in vinegar as I was putting on a forced patina. I left it overnight and the next day when I rinsed it off and wiped it down, a lot of the dye in the red bone handles of my very nice Tidioute knife left. I ended up with funky orange colored bone handles.
Attachments
IMG_4210.JPG
Phil
AAPK Administrator

Jesus died for you. Are you living for Him?

"Buy More Ammo!"
Johnnie Fain 1949-2009
eveled
Posts: 2582
Joined: Sun Oct 29, 2017 9:37 pm

Re: Forcing Patina

Post by eveled »

I think it's a mistake to submerge the whole knife. Unless you can remove the scales on a fixed blade. On a folder, let the springs and such get their own patina.

I like to stick the blade in an onion and let them sit for 48 hours. Here is my Randall.
Attachments
IMG_20171127_185635070.jpg
IMG_20171127_185621049.jpg
User avatar
treefarmer
Gold Tier
Gold Tier
Posts: 15178
Joined: Sun Oct 04, 2009 6:53 am
Location: Florida Panhandle(LA-Lower Alabama)

Re: Forcing Patina

Post by treefarmer »

eveled,
That's pretty neat! Looks almost like Damascus but there are the rings/layers of the onion. ::hmm:: Now a technical question, wonder if it makes a difference what variety of onion to achieve that effect? Vidalia's are sweet, logically they might not have the acid of a regular yellow onion that would taste hotter? Just a thought? ::shrug::
Treefarmer

A GUN IN THE HAND IS BETTER THAN A COP ON THE PHONE.
eveled
Posts: 2582
Joined: Sun Oct 29, 2017 9:37 pm

Re: Forcing Patina

Post by eveled »

This was a big old sweet Vidalia onion. I degreased the blade stuck it in didn't move it at all for 48 hours. When I pulled it out, I was so happy it had a double center, and I hit the center perfectly. It is good to be lucky! Even the spine looks cool, almost tiger striped. I did a Mercator cat knife in the same onion, the same way, not it did not turn out the same way.

Then I cut up the onion, fried it in butter, and had lunch.
Edgewise
Posts: 809
Joined: Fri Jun 01, 2007 3:34 pm

Re: Forcing Patina

Post by Edgewise »

philco wrote:I made the mistake of immersing my entire knife in vinegar as I was putting on a forced patina. I left it overnight and the next day when I rinsed it off and wiped it down, a lot of the dye in the red bone handles of my very nice Tidioute knife left. I ended up with funky orange colored bone handles.
If your knife's steel parts suffered no ill effects then I suppose that immersing a whole knife with delrin scales would be alright.
Did you blow dry or does vinegar not rust steel?
My knives tend to get rust on the tang before a patina develops and I have to be pushing Q-tips and toothpicks down in the handle to treat the springs. :|
User avatar
philco
Gold Tier
Gold Tier
Posts: 15552
Joined: Sat Mar 22, 2008 9:32 pm
Location: Kentucky (Wildcat Country)

Re: Forcing Patina

Post by philco »

Edgewise wrote:
philco wrote:I made the mistake of immersing my entire knife in vinegar as I was putting on a forced patina. I left it overnight and the next day when I rinsed it off and wiped it down, a lot of the dye in the red bone handles of my very nice Tidioute knife left. I ended up with funky orange colored bone handles.
If your knife's steel parts suffered no ill effects then I suppose that immersing a whole knife with delrin scales would be alright.
Did you blow dry or does vinegar not rust steel?
My knives tend to get rust on the tang before a patina develops and I have to be pushing Q-tips and toothpicks down in the handle to treat the springs. :|

After I removed it from the vinegar I rinsed it well with tap water then wiped it off with a rag. After that I used my wife's blow dryer to dry it completely.
Phil
AAPK Administrator

Jesus died for you. Are you living for Him?

"Buy More Ammo!"
Johnnie Fain 1949-2009
User avatar
Dinadan
Silver Tier
Silver Tier
Posts: 3671
Joined: Sat Dec 29, 2012 2:34 am
Location: Coastal Alabama

Re: Forcing Patina

Post by Dinadan »

Eveled - that is a very cool patina on your knife. I have never thought about how an onion could do that. I have put a patina on a knife blade or two by neglecting to wipe the blade after eating a pear or peach: never tried doing it on purpose.

Edgewise - a full immersion in vinegar should not be any worse for the steel than what my pocket knives go through just in the course of a week or two. They are exposed to sweat and fruit juice and the brine from Conecuh sausage and bacon packs. But after reading Phil's post I guess I will try not to get vinegar on any nice bone handles.
Mel
Edgewise
Posts: 809
Joined: Fri Jun 01, 2007 3:34 pm

Re: Forcing Patina

Post by Edgewise »

Sounds good, Dinadan.
philco, the scales may be funky orange but that overnight patina looks to me like 100 years old. ::tu::
eveled, it's a brave man who experiments with a Randall. Lucky it paid off this time. ::nod::
User avatar
tongueriver
Posts: 7242
Joined: Tue Sep 16, 2008 8:01 pm

Re: Forcing Patina

Post by tongueriver »

eveled wrote:I think it's a mistake to submerge the whole knife. Unless you can remove the scales on a fixed blade. On a folder, let the springs and such get their own patina. I like to stick the blade in an onion and let them sit for 48 hours. Here is my Randall.
Love the patina and love the Randall. ::tu:: ::tu:: ::tu:: I have a Randall coming in the mail today and I can't hardly stand it.... pacing.... pacing.
User avatar
KnifeSlinger#81
Posts: 4171
Joined: Tue Aug 11, 2015 8:50 pm
Location: Oklahoma
Contact:

Re: Forcing Patina

Post by KnifeSlinger#81 »

Theres only one time I have ever "soaked" a blade to patina. The backsprings were already a fully dark patina so I put a vinegar soaked rag on the blades one at a time and let each sit for about half a day. The blades were scratched and had the grinder treatment so they needed a good cover up, but it wasn't so bad that I needed to sand the blades down. I did tape up the handles during the process. It turned out well.

If I were going to patina springs I would just tape up the whole knife really well except the outside of the springs, then roll the knife up in a vinegar soaked rag. If I wanted to patina the inside of the springs I suppose I would open the blades and stuff a soaked rag in the blade well.

Usually the only time I force a patina is to even out an existing one.
-Paul T.

WANTED: Shapleigh Diamond Edge branded Schrades in good condition.
eveled
Posts: 2582
Joined: Sun Oct 29, 2017 9:37 pm

Re: Forcing Patina

Post by eveled »

Thanks for the compliments guys.

toungueriver, did you get your Randall?

Edgewise, it was not that big of a risk, patina will clean off with a scotch Brite pad and oil. The patina from use method wasn't working, it was getting weird spots.
User avatar
zzyzzogeton
Posts: 1842
Joined: Tue Jun 20, 2017 8:47 pm
Location: In the Heart of Texas on the Blackland Prairie

Re: Forcing Patina

Post by zzyzzogeton »

Almost any fruit or vegetable that is acidic can be used.

I accidentally left a triangular piece of potato on a knife for a couple of hours while I was distracted with other tasks. Ended up with a dark gray triangle on the blade.

Onions, tomatoes, tomatillos, oranges, grapefruit and Mustang grapes have all contributed to patinas on my uncoated users.
User avatar
jerryd6818
Posts: 39458
Joined: Sun Jan 04, 2009 5:23 am
Location: Farther down the road.

Re: Forcing Patina

Post by jerryd6818 »

zzyzzogeton wrote: Onions, tomatoes, tomatillos, oranges, grapefruit and Mustang grapes have all contributed to patinas on my uncoated users.
Rhubarb also does a good job.
Forged on the anvil of discipline.
The Few. The Proud.
Jerry D.

This country has become more about sub-groups than about it's unity as a nation.

"The #72 pattern has got to be pretty close to the perfect knife."
--T.J. Murphy 2012
alabama
Posts: 180
Joined: Fri Jan 19, 2018 10:08 pm

Re: Forcing Patina

Post by alabama »

leave them alone unless you are covering flaws - they rust anyway---I heard throwing the whole thing in battery acid works well if you let it sit a few days..
Post Reply

Return to “Knife Related Q&A”