How to change handles on Buck 110 (video)

[Crowfoot]

Hello, my video in English is ready. Try to describe how to
[youtube]https://youtu.be/jMHxT1WH1t8[/youtube]

[Meridian_Mike]

Very good video!
It is always interesting to see how other people work on knives.
.
That knife sure does look nice with new clothes on!

[1967redrider]

Hello, my video in English is ready. Try to describe how to
[youtube]https://youtu.be/jMHxT1WH1t8[/youtube]

Fixed your vid, Sergey. If you quote this post you will see how I modified the link to make the video instead of the link display on this forum.



(www.youtube.com/watch?v=)

[Crowfoot]

Very good video!
It is always interesting to see how other people work on knives.
.
That knife sure does look nice with new clothes on!

Thanks Mike!

[Crowfoot]

Hello, my video in English is ready. Try to describe how to
[youtube]https://youtu.be/jMHxT1WH1t8[/youtube]

Fixed your vid, Sergey. If you quote this post you will see how I modified the link to make the video instead of the link display on this forum.



(www.youtube.com/watch?v=)

WOW!!!! It is a super advice! Possible I correct another link this way =) Thanks a lot!

[1967redrider]

Great vid and I like how the 110 turned out.

[Crowfoot]

Great vid and I like how the 110 turned out.

Thanks! I will translate more my videos to English. It helps me to practice more. I do not know how my English sounds. I mean pronunciation. By tha way video helps to understand Also I am interested about my accent =) Try do not make typical Russian speakers mistakes. But some time my tonque would be break when try to say

[Meridian_Mike]

But some time my tongue would be break when try to say

Reminds of something I have heard before....
.
"My tongue flopped over my eye teeth and I couldn't see what I was sayin'...."

[1967redrider]

But some time my tongue would be break when try to say

Reminds of something I have heard before....
.
"My tongue flopped over my eye teeth and I couldn't see what I was sayin'...."

Just like knife fixing, practice makes perfect, Sergey!

John

[Crowfoot]

But some time my tongue would be break when try to say

Reminds of something I have heard before....
.
"My tongue flopped over my eye teeth and I couldn't see what I was sayin'...."

Just like knife fixing, practice makes perfect, Sergey!

John

Thanks John =)

[samb1955]

Knife looks great! Excellent video.

[Crowfoot]

Knife looks great! Excellent video.

Thanks!

[Va Guy]

Sergey
I enjoyed your video
Please send us some more.

Guy

[Jeffinn]

Hello, my video in English is ready. Try to describe how to
[youtube]https://youtu.be/jMHxT1WH1t8[/youtube]

Hi Sergey!
That knife turned out great!
I like the look of the bone handles with no pins. Have you had any problems with the “pinless” knife handles coming loose?
Thanks for sharing your technique with us.
Jeff

[Crowfoot]

Sergey
I enjoyed your video
Please send us some more.

Guy

thanks!

[Crowfoot]

Hello, my video in English is ready. Try to describe how to
[youtube]https://youtu.be/jMHxT1WH1t8[/youtube]

Hi Sergey!
That knife turned out great!
I like the look of the bone handles with no pins. Have you had any problems with the “pinless” knife handles coming loose?
Thanks for sharing your technique with us.
Jeff

When I glued fist time at this knife by уpoxy - something going wrong. I use Slow Cure 30 min epoxy from US. Maybe it was so old, maybe i forgot degrease. But second time I used waterproof cyanocrilate. Also it is my first handle without pins I have not have enough statistic for this time. But I trust to knives assembled with pins more than glued Modern chemistry do not stay at one place and always found something new. But this knife would be in my pocket and tested by life.

[Jeffinn]

Hello, my video in English is ready. Try to describe how to
[youtube]https://youtu.be/jMHxT1WH1t8[/youtube]

Hi Sergey!
That knife turned out great!
I like the look of the bone handles with no pins. Have you had any problems with the “pinless” knife handles coming loose?
Thanks for sharing your technique with us.
Jeff

When I glued fist time at this knife by уpoxy - something going wrong. I use Slow Cure 30 min epoxy from US. Maybe it was so old, maybe i forgot degrease. But second time I used waterproof cyanocrilate. Also it is my first handle without pins I have not have enough statistic for this time. But I trust to knives assembled with pins more than glued Modern chemistry do not stay at one place and always found something new. But this knife would be in my pocket and tested by life.

Thank you for the response Sergey.
I pin all of my handles but recently bought some new epoxy that’s made specifically for knife handles so I may try a few with no pins to see how they hold up.
It does look nice without the pins!
Jeff

[Crowfoot]

Hi Sergey!
That knife turned out great!
I like the look of the bone handles with no pins. Have you had any problems with the “pinless” knife handles coming loose?
Thanks for sharing your technique with us.
Jeff

When I glued fist time at this knife by уpoxy - something going wrong. I use Slow Cure 30 min epoxy from US. Maybe it was so old, maybe i forgot degrease. But second time I used waterproof cyanocrilate. Also it is my first handle without pins I have not have enough statistic for this time. But I trust to knives assembled with pins more than glued Modern chemistry do not stay at one place and always found something new. But this knife would be in my pocket and tested by life.

Thank you for the response Sergey.
I pin all of my handles but recently bought some new epoxy that’s made specifically for knife handles so I may try a few with no pins to see how they hold up.
It does look nice without the pins!
Jeff

But all old school knives need a pins =)

[Crowfoot]

Also sewed a sheath
Video in progress =)

[Reverand]

Sergey I really enjoyed your video. Your English is good, and I understood everything clearly, and I love the look of that knife! The Amber bone was a perfect choice for it!
But I do ask you to wear a mask when you are cutting and sanding bone. The little pieces that you breathe in can damage your lungs. I want you to remain healthy and keep making these beautiful knives!

[Crowfoot]

Sergey I really enjoyed your video. Your English is good, and I understood everything clearly, and I love the look of that knife! The Amber bone was a perfect choice for it!
But I do ask you to wear a mask when you are cutting and sanding bone. The little pieces that you breathe in can damage your lungs. I want you to remain healthy and keep making these beautiful knives!

Thanks! And I will try using a mask =)