Page 13 of 17
Re: Old knives with tipped bolsters
Posted: Sun Mar 22, 2026 8:12 pm
by danno50
Waukonda wrote: ↑Sun Mar 22, 2026 7:14 pm
danno50 wrote: ↑Sun Mar 22, 2026 5:30 pm
A few more Keen Kutters
That last one, the bone handled, sure is a beauty. Thanks for showing. How many Keen Kutters do you have in your collection? Edward C. Simmons could never have envisioned so many of his knives with a caretaker in Saskatchewan more than 100 years after manufacture.
Thank you Ike and Skip. Ike, I have 80 Simmons era Keen Kutters.
Re: Old knives with tipped bolsters
Posted: Mon Mar 23, 2026 1:13 pm
by Waukonda
danno50 wrote: ↑Sun Mar 22, 2026 8:12 pm
Thank you Ike and Skip. Ike, I have 80 Simmons era Keen Kutters.
I always enjoy your posts, you have a great collection!
Eighty Keen Kutters puts you
only 72 ahead of me!

Re: Old knives with tipped bolsters
Posted: Mon Mar 23, 2026 10:05 pm
by danno50
Waukonda wrote: ↑Mon Mar 23, 2026 1:13 pm
danno50 wrote: ↑Sun Mar 22, 2026 8:12 pm
Thank you Ike and Skip. Ike, I have 80 Simmons era Keen Kutters.
I always enjoy your posts, you have a great collection!
Eighty Keen Kutters puts you
only 72 ahead of me!
Is that counting the two very nice ones you just posted in the Keen Kutter thread?
Re: Old knives with tipped bolsters
Posted: Tue Mar 24, 2026 12:03 am
by Waukonda
danno50 wrote: ↑Mon Mar 23, 2026 10:05 pm
Waukonda wrote: ↑Mon Mar 23, 2026 1:13 pm
danno50 wrote: ↑Sun Mar 22, 2026 8:12 pm
Thank you Ike and Skip. Ike, I have 80 Simmons era Keen Kutters.
I always enjoy your posts, you have a great collection!
Eighty Keen Kutters puts you
only 72 ahead of me!
Is that counting the two very nice ones you just posted in the Keen Kutter thread?
Yes

Re: Old knives with tipped bolsters
Posted: Wed Mar 25, 2026 11:00 am
by New_Windsor_NY
A couple of days ago, this pocket knife arrived in a group or lot of pocket knives that I bought. It now becomes my latest example to be posted under this topic or thread. It also became the latest example to be added to my general, pocket knife accumulation. I did NOT buy the group or lot of pocket knives to obtain this particular pocket knife. It is a The Ideal, two blades, two tang stamps, two springs, 3 1/4" closed, "dimpled" pins or rivets, tipped bolsters, pocket knife. The main blade front tang stamp says, "The Ideal (written) (over) U.S.A." The secondary blade front tang stamp says, "U.S.A." The main blade does NOT have a half stop. The main blade does have a GOOD opening snap. The main blade does have a GOOD closing snap. The secondary blade does have a CRISP half stop. The secondary blade does have a GOOD opening snap. The secondary blade does have a GOOD closing snap. Overall, this pocket knife is in FAIR condition. This pocket knife did NOT need any cleaning at all. I just wiped it off. I took some pictures and here it is.
Caption(s), if any, are on the BOTTOM of the corresponding picture(s).
Click on a picture to ENLARGE.
Re: Old knives with tipped bolsters
Posted: Thu Mar 26, 2026 1:35 am
by Miller Bro's
Mumbleypeg wrote: ↑Fri Mar 20, 2026 5:56 pm
Do you know what the Case pattern number is? Or what’s the closed length?
Found it , it is 3 5/16 long closed

Re: Old knives with tipped bolsters
Posted: Thu Mar 26, 2026 3:17 am
by Mumbleypeg
Miller Bro's wrote: ↑Thu Mar 26, 2026 1:35 am
Mumbleypeg wrote: ↑Fri Mar 20, 2026 5:56 pm
Do you know what the Case pattern number is? Or what’s the closed length?
Found it , it is 3 5/16 long closed
I’m guessing it’s a 9260, but neither Sargent’s 4nor Parker’s list anything but bone (6260) and stag (5260) versions, and say the 60 pattern is 3-7/16 long. Most Case patterns that have tip bolsters are much smaller. If it’s not a 60 pattern maybe Steve Pfeiffer or someone else will recognize it.
Ken
Re: Old knives with tipped bolsters
Posted: Thu Mar 26, 2026 7:00 am
by New_Windsor_NY
A few days ago, this advertising pocket knife arrived in a group or lot of pocket knives that I purchased. It now becomes my most recent example to be posted under this topic or thread. It also became the most recent example to be added to my general, advertising, pocket knife accumulation. This advertising pocket knife was NOT the reason that I purchased the group or lot of pocket knives. It is a U.S.A., one blade, one tang stamp, 3 1/2" closed, "dimpled" pins or rivets, tipped bolsters, advertising pocket knife. The main blade front tang stamp says, "U.S.A." The main handle side says, "PEPSI COLA (written) 5¢" The other handle side says nothing, it is blank. The main blade is out of alignment with the spring. The main blade does NOT have a half stop. The main blade does NOT have an opening snap. The main blade does NOT have a closing snap. Overall, this pocket knife is in FAIR condition. This pocket knife did NOT require cleaning at all. I just wiped it off.
I took some pictures and here it is.
Caption(s), if any, are on the BOTTOM of the corresponding picture(s).
Click on a picture to ENLARGE.
Re: Old knives with tipped bolsters
Posted: Thu Mar 26, 2026 1:37 pm
by toomanyknives
New_Windsor_NY wrote: ↑Thu Mar 26, 2026 7:00 am
A few days ago, this advertising pocket knife arrived in a group or lot of pocket knives that I purchased. It now becomes my most recent example to be posted under this topic or thread. It also became the most recent example to be added to my general, advertising, pocket knife accumulation. This advertising pocket knife was NOT the reason that I purchased the group or lot of pocket knives. It is a U.S.A., one blade, one tang stamp, 3 1/2" closed, "dimpled" pins or rivets, tipped bolsters, advertising pocket knife. The main blade front tang stamp says, "U.S.A." The main handle side says, "PEPSI COLA (written) 5¢" The other handle side says nothing, it is blank. The main blade is out of alignment with the spring. The main blade does NOT have a half stop. The main blade does NOT have an opening snap. The main blade does NOT have a closing snap. Overall, this pocket knife is in FAIR condition. This pocket knife did NOT require cleaning at all. I just wiped it off.
I took some pictures and here it is.
Caption(s), if any, are on the BOTTOM of the corresponding picture(s).
Click on a picture to ENLARGE.
Your cool Pepsi knife reminded me of my Coke knife, Skip. I thought you might like to see it..
Re: Old knives with tipped bolsters
Posted: Thu Mar 26, 2026 2:15 pm
by New_Windsor_NY
Thank you, Kerry.

That's a VERY NICE Coca Cola pocket knife.
You should post it here also:
https://www.allaboutpocketknives.com/kn ... hp?t=67062
Re: Old knives with tipped bolsters
Posted: Thu Mar 26, 2026 8:24 pm
by Waukonda
Nice Coke & Pepsi knives from the good old days of a Nickel serving.
Re: Old knives with tipped bolsters
Posted: Thu Mar 26, 2026 9:29 pm
by Miller Bro's
This is an unusual and rare one!

Re: Old knives with tipped bolsters
Posted: Thu Mar 26, 2026 10:30 pm
by New_Windsor_NY
Waukonda wrote: ↑Thu Mar 26, 2026 8:24 pm
Nice.....
Ike, on behalf of myself, I thank you.
That is a G@@D L

KING pocket knife, Dimitri.

Re: Old knives with tipped bolsters
Posted: Thu Mar 26, 2026 11:33 pm
by Waukonda
Miller Bro's wrote: ↑Thu Mar 26, 2026 9:29 pm
This is an unusual and rare one!
Fitting description, what exactly is that shield?
Re: Old knives with tipped bolsters
Posted: Thu Mar 26, 2026 11:44 pm
by toomanyknives
Waukonda wrote: ↑Thu Mar 26, 2026 8:24 pm
Nice Coke & Pepsi knives from the good old days of a Nickel serving.

Re: Old knives with tipped bolsters
Posted: Thu Mar 26, 2026 11:44 pm
by toomanyknives
Miller Bro's wrote: ↑Thu Mar 26, 2026 9:29 pm
This is an unusual and rare one!
What a cool knife, MB! It has to be super rare!
Re: Old knives with tipped bolsters
Posted: Thu Mar 26, 2026 11:47 pm
by toomanyknives
This is by far my best Tip Bolster knife..

- Shapleigh etch.JPG (4.84 KiB) Viewed 397 times
Re: Old knives with tipped bolsters
Posted: Fri Mar 27, 2026 12:00 am
by New_Windsor_NY
For sure, a GORGEOUS piece of pocket cutlery, Kerry.

Re: Old knives with tipped bolsters
Posted: Fri Mar 27, 2026 1:17 am
by toomanyknives
toomanyknives wrote: ↑Thu Mar 26, 2026 11:47 pm
This is by far my best Tip Bolster knife..
Shapleigh DE Front open.JPGShapleigh etch.JPGShapleigh DE back.JPG
Thanks so much, Skip.

Re: Old knives with tipped bolsters
Posted: Fri Mar 27, 2026 1:30 am
by Waukonda
toomanyknives wrote: ↑Thu Mar 26, 2026 11:47 pm
This is by far my best Tip Bolster knife..
Shapleigh DE Front open.JPGShapleigh etch.JPGShapleigh DE back.JPG
Just a classic old knife, Kerry, beautiful!
Re: Old knives with tipped bolsters
Posted: Fri Mar 27, 2026 1:42 am
by toomanyknives
Waukonda wrote: ↑Fri Mar 27, 2026 1:30 am
toomanyknives wrote: ↑Thu Mar 26, 2026 11:47 pm
This is by far my best Tip Bolster knife..
Shapleigh DE Front open.JPGShapleigh etch.JPGShapleigh DE back.JPG
Just a classic old knife, Kerry, beautiful!
Thanks Ike. It's one of my best.

Re: Old knives with tipped bolsters
Posted: Fri Mar 27, 2026 9:12 am
by Miller Bro's
New_Windsor_NY wrote: ↑Thu Mar 26, 2026 10:30 pm
That is a G@@D LKING pocket knife, Dimitri.
Thanks Skip!
Waukonda wrote: ↑Thu Mar 26, 2026 11:33 pm
Fitting description, what exactly is that shield?
The shield is a square piece of nickel, on the back side of the knife!
Re: Old knives with tipped bolsters
Posted: Fri Mar 27, 2026 9:14 am
by Miller Bro's
toomanyknives wrote: ↑Thu Mar 26, 2026 11:44 pm
What a cool knife, MB! It has to be super rare!
Thank you!
I've never seen another one quite like it!

Re: Old knives with tipped bolsters
Posted: Fri Mar 27, 2026 9:15 am
by Miller Bro's
toomanyknives wrote: ↑Thu Mar 26, 2026 11:47 pm
This is by far my best Tip Bolster knife..
And what a beautiful Knife it is!

Re: Old knives with tipped bolsters
Posted: Fri Mar 27, 2026 1:35 pm
by toomanyknives
Miller Bro's wrote: ↑Fri Mar 27, 2026 9:15 am
toomanyknives wrote: ↑Thu Mar 26, 2026 11:47 pm
This is by far my best Tip Bolster knife..
And what a beautiful Knife it is!
Thanks so much, MB. I was thrilled when I found it years ago..
