All About Pocket Knives

Well......................here she is!

It's 9 1/2" inches overall, the blade is 4 3/8" it feels real nice in your hand. It has a few issues, but it was a great learning experience. I honed an edge on it and tested it on this hemp rope. It made 25 cuts with no hesitation (and would have kept going but I quit there). I have store bought knives that go dull before 10 cuts!

There was also an involuntary test! I accidentally dropped the knife, and of course it landed tip first onto the concrete! You know how things go into slow motion during an accident??? As I watched it, all I could think was "you just broke the tip off!" To my amazement, it chipped the concrete....with NO damage to the tip whatsoever!

I'm pretty gassed. I think I'll go make myself a cocktail and celebrate!

Take care all..................

Gary make yourself two cocktails that knife is beautiful
Great job

______________
Don

WOW big difference from the first pic you posted of the blade only. It really does look nice!
Leo

Gary,
That looks great.
I am much impressed.

I do believe you are hooked ole boy!

Are you gonna have time to make us all one by Christmas?

Very nice work and design......

Great looking knife, Gary !

Couple of quick questions... Did you heat treat in the forge, or do you have an oven ? And, did you solder the guard, or is it a compression-type fit ??

Good work, man
JR

Nice job Gary.
Kinda looks like a Jim Bearing (Treeman)
style knife. You got to be proud,
I know we are all proud of ya
Will
http://www.allaboutpocketknives.com/clearcreekknives

Great job ,congrats.

Very nice!

But I have 1 question.... are you already thinking about knife #2???

If so CONGRATS YOU ARE HOOKED FOR LIFE!!

Keep up the good work!

Thanks for the complements guys! I appreciate it..................

Ringmaster.................The guard is soldered on (one of the issues). It was my first attempt at it and it didn't come out as good as I wanted. I think I have figured out where I went wrong. It was heat treated in an oven 3 times for two hours each time at 400F (Ed Fowler teaching).

Stagman..............I have always been a fan of William Scagel's work, and yes, Jim Behring does him proud! There is a Scagel knife (if it's authentic) on eBay now, it's up to $2,000.00.

Knifemaker...............#2 is on the drawing board!!

I'll be making knives in this style and possibly pattern a few after Jimmy Lile. Heck, I may even come up with something of my own!

Take care.............................

thats a knife to be proud of

Gary, I would top shelf display that knife any day. That is truely a Beauty! Kelley

That's a beauty Gary, certainly a knife to be proud of. You're probably right about the silver solder, the low temp (4% silver) melts at 400F to 435F depending on whose stats your reading for the same solder (Stay -Brite). Likely one temp is a melt point - the other flow.

Beautiful first knife, looks fantastic - hang onto that one!

THAT is a beauty, Gary. I think you found your calling.
...CCBill...

Thanks everyone for taking a look and for the comments!

Hello Gary,

I missed this great topic, you have made quite the knife there my friend. I love the handle and look of what you have made...I'll take 5 please...Can you have them done by next week...

Very nice

Ralph

Thanks Ralph!

There's coming a day I may have a couple for sale. Until then I'll be improving my craft by filling requests from brothers, cousins, in-laws and outlaws. Hell, they'll keep me busy for a year or more sounds like!

Thanks again everyone.

gmusic wrote:There's coming a day I may have a couple for sale. Until then I'll be improving my craft by filling requests from brothers, cousins, in-laws and outlaws. Hell, they'll keep me busy for a year or more sounds like!

That's why I quit building muzzle-loaders. Every time I got one built, they would wait until I wasn't home and go by and get it. I got DAMN good at it, but never got to make one for myself.

If your first one is any indication, you're gonna build some beauties.
...CCBill...

Yes, you will be very good - Your relatives will be closer and make sure you get all the practice you need. The upside is that others will see your work that friends and relatives are using or carrying and that will get you sales. So, it ends up as being good advertising.

gmusic wrote:Thanks Ralph!

There's coming a day I may have a couple for sale. Until then I'll be improving my craft by filling requests from brothers, cousins, in-laws and outlaws. Hell, they'll keep me busy for a year or more sounds like!

Thanks again everyone.

Gary ROFLMAO
Here is my Christmas list of knives made & some yet to make:
13-Folders (kits....I got lazy) for grandsons, son-in-laws, boyfriends (of daughters), Dad, etc.
10-Kitchen knifes, daughters, wife, girl friends & fiancées (of sons), granddaughters, etc.
1 Camillus CQB for daughter in National Guard.
2 Sharpfingers for sons.

Then there are knives for customers & friends.
It is hard to get time to make one for myself!

But these are things you will learn Gary!
Have a Merry Christmas,
Dale

It looks great. I have only one complaint. I need more light to see it better. If this was your first they can only get better. The more you work them the more you learn.