Page 1 of 1

This can't be right - can it?

Posted: Tue Feb 02, 2021 7:58 pm
by just bob
Pretty sure out in my junk box I have a knife with a shield like this that was made in China. Then look closer and the handles are glued on and have no pins holding them on.


https://www.ebay.com/itm/CATTARAUGUS-3- ... SwdBNgEa~z

Re: This can't be right - can it?

Posted: Tue Feb 02, 2021 8:34 pm
by cody6268
From the looks of the jigging, it looks like the entire handle was taken off a cheap knife. And maybe the small clip point blade as well.

Re: This can't be right - can it?

Posted: Tue Feb 02, 2021 9:43 pm
by Shearer
I'm going for Pakistan.
Looks like someone purchased a set of tang stamp and was looking for a cheap knife to try them on. ::td::


Grant

Re: This can't be right - can it?

Posted: Tue Feb 02, 2021 9:56 pm
by herbva
Well, it does have an interesting bird on the shield. Maybe that is a "Cattaraugus bird"? ::ds::

Re: This can't be right - can it?

Posted: Tue Feb 02, 2021 10:25 pm
by doglegg
Those show up pretty regularly. I think the consences is far east. I have one like that. I have seen them with bright yellow handles. That is the first one I have seen with a tang stamp

Re: This can't be right - can it?

Posted: Tue Feb 02, 2021 10:45 pm
by Mumbleypeg
One of the “Camillus 72 Clone” junkies will buy it whether it’s junk or not. ::poke:: :lol:

Ken

Re: This can't be right - can it?

Posted: Tue Feb 02, 2021 11:03 pm
by edge213
Definitely a frankenknife, but I don't believe its pakistan.

Re: This can't be right - can it?

Posted: Tue Feb 02, 2021 11:07 pm
by Ripster
edge213 wrote: Tue Feb 02, 2021 11:03 pm Definitely a frankenknife, but I don't believe its pakistan.
Agree, and if we knew the length would help ,but didn’t see it mentioned.
This 72 junkie may go after if price stays low.

Re: This can't be right - can it?

Posted: Tue Feb 02, 2021 11:13 pm
by 1967redrider
herbva wrote: Tue Feb 02, 2021 9:56 pm Well, it does have an interesting bird on the shield. Maybe that is a "Cattaraugus bird"? ::ds::
::rotflol:: ::rotflol:: ::rotflol:: ::rotflol::

Re: This can't be right - can it?

Posted: Tue Feb 02, 2021 11:15 pm
by 1967redrider
Mumbleypeg wrote: Tue Feb 02, 2021 10:45 pm One of the “Camillus 72 Clone” junkies will buy it whether it’s junk or not. ::poke:: :lol:

Ken

Did you just shoot over a Marine's head, Ken? ::super_happy::

Re: This can't be right - can it?

Posted: Tue Feb 02, 2021 11:28 pm
by Mumbleypeg
1967redrider wrote: Tue Feb 02, 2021 11:15 pm
Mumbleypeg wrote: Tue Feb 02, 2021 10:45 pm One of the “Camillus 72 Clone” junkies will buy it whether it’s junk or not. ::poke:: :lol:

Ken

Did you just shoot over a Marine's head, Ken? ::super_happy::
Nah, there's a bunch of them. You don't have to aim to hit something. :lol:

(Don't tell anyone but I even have a couple of them myself). ::facepalm::

Ken

Re: This can't be right - can it?

Posted: Wed Feb 03, 2021 12:08 am
by just bob
I found mine. It is 3 1/2" long. I feel certain this is from China but it isn't marked at all. Ripster if you collect this pattern don't waste your money on the ebay knife. I have no interest in keeping this and will be glad to see it go to a good home. We can work a trade out on something I'm sure just PM me.

Re: This can't be right - can it?

Posted: Wed Feb 03, 2021 12:22 am
by FRJ
Kind of reminds me of my Hollinger.

Re: This can't be right - can it?

Posted: Wed Feb 03, 2021 12:24 am
by Ripster
just bob wrote: Wed Feb 03, 2021 12:08 am I found mine. It is 3 1/2" long. I feel certain this is from China but it isn't marked at all. Ripster if you collect this pattern don't waste your money on the ebay knife. I have no interest in keeping this and will be glad to see it go to a good home. We can work a trade out on something I'm sure just PM me.
Was more curious than anything . But Skip verified the shield and several other things in a post elsewhere. It was a conversation piece type thing.
Thank you for your offer,was hoping that I didn’t step on any toes going after a beater. You do see a lot of wannabe 72s etc, etc, .We all learn a little ,laugh a little, sometimes we even score a dandy .
Do appreciate the offer , take care ::tu::

Re: This can't be right - can it?

Posted: Wed Feb 03, 2021 3:05 pm
by New_Windsor_NY
Mumbleypeg wrote: Tue Feb 02, 2021 10:45 pm One.....
Oh you can bet on that.

Re: This can't be right - can it?

Posted: Wed Feb 03, 2021 3:36 pm
by jerryd6818
I have a yellow one. Don't remember where I got it. I think it was a gift. No marks on it whatsoever except for the bird on the shield Very crudely made but the main snaps like Oprah on a pork chop.

Re: This can't be right - can it?

Posted: Wed Feb 03, 2021 4:22 pm
by just bob
If anyone wants that black one just PM. I'll trade for about anything I don't have to feed or mow.

Re: This can't be right - can it?

Posted: Wed Feb 03, 2021 7:00 pm
by doglegg
jerryd6818 wrote: Wed Feb 03, 2021 3:36 pm I have a yellow one. Don't remember where I got it. I think it was a gift. No marks on it whatsoever except for the bird on the shield Very crudely made but the main snaps like Oprah on a pork chop.
I gave that one to you Jerry. And as you can tell I always only give the best and most expensive gifts. And it appears that you were properly impressed with such generosity. :lol: :lol: ::tounge:: ::tounge::

Re: This can't be right - can it?

Posted: Wed Feb 03, 2021 7:02 pm
by New_Windsor_NY
Gee, I wonder who the poor, confused, misguided chump is that actually bought this one?

Re: This can't be right - can it?

Posted: Wed Feb 03, 2021 7:06 pm
by doglegg
New_Windsor_NY wrote: Wed Feb 03, 2021 7:02 pm Gee, I wonder who the poor, confused, misguided chump is that actually bought this one?
I know who the poor, confused, misguided chump that bought one just like it a few month ago. :roll: :roll: :oops: :oops:

Re: This can't be right - can it?

Posted: Wed Feb 03, 2021 7:09 pm
by New_Windsor_NY
doglegg wrote: Wed Feb 03, 2021 7:06 pm
New_Windsor_NY wrote: Wed Feb 03, 2021 7:02 pm Gee, I wonder who the poor, confused, misguided chump is that actually bought this one?
I know who the poor, confused, misguided chump that bought one just like it a few month ago. :roll: :roll: :oops: :oops:
It'll be my second with that "bird" shield.
But it'll be my first with "CATTARAUGUS" tang stamped blades.
I can't wait to get this one!
:D

***** EDIT ***** EDIT ***** EDIT *****
I checked and I evidently DO NOT have a CAMILLUS 72 variation/clone
pocket knife with the "bird" shield. This will be my first one.

Re: This can't be right - can it?

Posted: Wed Feb 03, 2021 9:43 pm
by jerryd6818
doglegg wrote: Wed Feb 03, 2021 7:00 pm
jerryd6818 wrote: Wed Feb 03, 2021 3:36 pm I have a yellow one. Don't remember where I got it. I think it was a gift. No marks on it whatsoever except for the bird on the shield Very crudely made but the main snaps like Oprah on a pork chop.
I gave that one to you Jerry. And as you can tell I always only give the best and most expensive gifts. And it appears that you were properly impressed with such generosity. :lol: :lol: ::tounge:: ::tounge::
My apologies for my memory Floyd. Unfortunately, you can look forward to it. ::facepalm::

Re: This can't be right - can it?

Posted: Wed Feb 03, 2021 11:27 pm
by doglegg
Looking forward is about all the mind I have left. There's no looking back. ::facepalm::

Re: This can't be right - can it?

Posted: Thu Feb 04, 2021 12:20 am
by Ripster
New_Windsor_NY wrote: Wed Feb 03, 2021 7:09 pm
doglegg wrote: Wed Feb 03, 2021 7:06 pm
New_Windsor_NY wrote: Wed Feb 03, 2021 7:02 pm Gee, I wonder who the poor, confused, misguided chump is that actually bought this one?
I know who the poor, confused, misguided chump that bought one just like it a few month ago. :roll: :roll: :oops: :oops:
It'll be my second with that "bird" shield.
But it'll be my first with "CATTARAUGUS" tang stamped blades.
I can't wait to get this one!
:D
::tu:: Atta guy Skip, like your style ::handshake::.

Re: This can't be right - can it?

Posted: Thu Feb 04, 2021 12:46 am
by New_Windsor_NY
Ripster wrote: Thu Feb 04, 2021 12:20 am ::tu::.....
Thank you JP.🍻
This one is going to be fun to "dissect." ::tu::
::handshake::