Schrade Cut Co Jack to Easy Opener

The place to show off and discuss factory manufactured knives customized with scrimshaw, inlays, file work, etc...
Post Reply
User avatar
orvet
Gold Tier
Gold Tier
Posts: 19902
Joined: Tue May 16, 2006 6:23 am
Location: Willamette Valley, Oregon

Schrade Cut Co Jack to Easy Opener

Post by orvet »

I debated where to start this topic, in the Customized or Repaired knives.
I opted for Customized, as there was maybe a bit more customizing in it than restoration.

I actually have a before pic on this one, (patting myself on the back for remembering). :mrgreen:
Schrade Cut Co cell customized jack before a.jpg
The handle was scratched and the blade had grooves from top to bottom as if someone had used a grinder (Dremel) to attempt to thin the blade or maybe to sharpen?

I removed the broken pen blade and reassembled the knife as a single blade.
There was a tremendous amount of sanding that went into getting the grooves (mostly) out of the blade, also a lot of sanding of the bolsters and polishing of the celluloid. There is also a ding in the celluloid near the pile side rocker pin.

It has such unique celluloid I thought it was worth saving.
I also decided to make it an easy opener.
This knife is as sharp as a scalpel! :shock:

What do you think?
Would carry such a knife? ::shrug::
Attachments
Schrade Cut Co cell customized jack a.jpg
Schrade Cut Co cell customized jack b.jpg
Schrade Cut Co cell customized jack c.jpg
Dale
AAPK Administrator

Please visit my AAPK store: www.allaboutpocketknives.com/orvet

Job 13:15

"Buy more ammo!" - Johnnie Fain
“Evil is Powerless If The Good are Unafraid.” – Ronald Reagan
User avatar
Iron Hoarder
Posts: 1808
Joined: Sat Jan 16, 2010 3:03 pm
Location: Chertsey, Surrey, UK
Contact:

Re: Schrade Cut Co Jack to Easy Opener

Post by Iron Hoarder »

Nice save!! I'd carry it with pride.
I measure my collection by the ton.
Whoever dies with the most tools wins......Now accepting donations.
jmh58
Posts: 14252
Joined: Wed Apr 02, 2008 11:22 pm
Location: Pgh,Pa

Re: Schrade Cut Co Jack to Easy Opener

Post by jmh58 »

What IH said times 2!! NICE!! John ::groove::
Not all who wander are lost!!

Of all the paths you take in life,
Make sure some of them are Dirt!!!
gino
Posts: 8371
Joined: Sun Feb 28, 2010 3:50 pm
Location: Pa
Contact:

Re: Schrade Cut Co Jack to Easy Opener

Post by gino »

Who wouldnt carry that? Its very cool! ::drool::
-( life is too short to carry a cheap knife )-
User avatar
1967redrider
Gold Tier
Gold Tier
Posts: 21508
Joined: Wed Feb 02, 2011 4:23 pm
Location: Alexandria, VA
Contact:

Re: Schrade Cut Co Jack to Easy Opener

Post by 1967redrider »

Nice work! ::tu::
Pocket, fixed, machete, axe, it's all good!

You're going to look awfully silly with that knife sticking out of your @#$. -Clint Eastwood, High Plains Drifter


CHRIST IS KING
trey
Posts: 464
Joined: Sun Apr 11, 2010 5:41 pm
Location: Helotes, Texas

Re: Schrade Cut Co Jack to Easy Opener

Post by trey »

I think we all like your 'make it a single blade and add an easy open notch' work, Dale.
That is awesome.
User avatar
TripleF
Gold Tier
Gold Tier
Posts: 19613
Joined: Mon Feb 14, 2011 3:42 pm
Location: West Central FL
Contact:

Re: Schrade Cut Co Jack to Easy Opener

Post by TripleF »

Dale "Magic" Vincent they call you!!
User avatar
biglmbass
Posts: 926
Joined: Sat Nov 06, 2010 11:41 pm
Location: Alabama

Re: Schrade Cut Co Jack to Easy Opener

Post by biglmbass »

Iron Hoarder wrote:Nice save!! I'd carry it with pride.
Yep. ::tu:: ::nod::
User avatar
Toejammer
Posts: 878
Joined: Fri Apr 30, 2010 10:09 pm
Location: Tryon, NE

Re: Schrade Cut Co Jack to Easy Opener

Post by Toejammer »

Sweet resto, way to save that cell handle ::tu::
A wise man can learn more from a foolish question than a fool can learn from a wise answer.
Bruce Lee
User avatar
glennbad
Gold Tier
Gold Tier
Posts: 8178
Joined: Mon May 15, 2006 11:13 am
Location: NH

Re: Schrade Cut Co Jack to Easy Opener

Post by glennbad »

That one hits the sweet spot Dale!

Nice save!

Glenn
User avatar
orvet
Gold Tier
Gold Tier
Posts: 19902
Joined: Tue May 16, 2006 6:23 am
Location: Willamette Valley, Oregon

Re: Schrade Cut Co Jack to Easy Opener

Post by orvet »

Thanks for the nice comments guys.
I haven't decided if I will take this to the show and sell it, or EDC it.
It is super sharp, but it has a stronger snap than I really like. ::shrug::
Dale
AAPK Administrator

Please visit my AAPK store: www.allaboutpocketknives.com/orvet

Job 13:15

"Buy more ammo!" - Johnnie Fain
“Evil is Powerless If The Good are Unafraid.” – Ronald Reagan
User avatar
Jeffrey
Posts: 373
Joined: Thu Mar 12, 2009 1:30 am
Location: Mentor, Ohio

Re: Schrade Cut Co Jack to Easy Opener

Post by Jeffrey »

LOVE the ez open pattern! You did a great job!
PRAY FOR OUR TROOPS!
User avatar
jerryd6818
Posts: 39458
Joined: Sun Jan 04, 2009 5:23 am
Location: Farther down the road.

Re: Schrade Cut Co Jack to Easy Opener

Post by jerryd6818 »

Dale, are you sure those handles are Celluloid? From Illinois they look like horn but you know how bad my eyes are getting. Or is it how bad your eyes are getting? I can never seem to get that straight. :lol:
Forged on the anvil of discipline.
The Few. The Proud.
Jerry D.

This country has become more about sub-groups than about it's unity as a nation.

"The #72 pattern has got to be pretty close to the perfect knife."
--T.J. Murphy 2012
User avatar
orvet
Gold Tier
Gold Tier
Posts: 19902
Joined: Tue May 16, 2006 6:23 am
Location: Willamette Valley, Oregon

Re: Schrade Cut Co Jack to Easy Opener

Post by orvet »

My eyes are bad. I went to the VA for an eye exam the 3rd of November 2011. They said I would get the glasses in about 9 weeks. Todays is March 9th, 2012 and still no glasses. I called them this week and they said the new lab had a software malfunction and they are trying to get the contractor to fix it. They said my prescription was not lost; it is just that their brand new lab doesn’t work. The guy also told me there were people who had their prescriptions written in August or September who are still waiting for their new glasses. ::shrug::
I hope I get them before my November 2012 eye exam appointment. ::doh::

So to answer your question, yes, my eyes are bad, but when I polished the handles there was absolutely no mistaking the distinct odor of celluloid! ::nod::
When I bought it on ebay the seller said he thought it was horn, but I have worked with plenty of horn and it smells entirely different than celluloid.
Dale
AAPK Administrator

Please visit my AAPK store: www.allaboutpocketknives.com/orvet

Job 13:15

"Buy more ammo!" - Johnnie Fain
“Evil is Powerless If The Good are Unafraid.” – Ronald Reagan
User avatar
jerryd6818
Posts: 39458
Joined: Sun Jan 04, 2009 5:23 am
Location: Farther down the road.

Re: Schrade Cut Co Jack to Easy Opener

Post by jerryd6818 »

orvet wrote:My eyes are bad. I went to the VA for an eye exam the 3rd of November 2011. They said I would get the glasses in about 9 weeks. Todays is March 9th, 2012 and still no glasses. I called them this week and they said the new lab had a software malfunction and they are trying to get the contractor to fix it. They said my prescription was not lost; it is just that their brand new lab doesn’t work. The guy also told me there were people who had their prescriptions written in August or September who are still waiting for their new glasses. ::shrug::
I hope I get them before my November 2012 eye exam appointment. ::doh::

So to answer your question, yes, my eyes are bad, but when I polished the handles there was absolutely no mistaking the distinct odor of celluloid! ::nod::
When I bought it on ebay the seller said he thought it was horn, but I have worked with plenty of horn and it smells entirely different than celluloid.
And once your new glasses show up, you still have to take them to Walmart or someplace to get them adjusted (unless you do that sort of thing yourself). I guess it's a small price to pay for 'free' glasses.

Okay, you're the guy with the knife in hand so you would know. It's such a shame the Celluloid can be so unstable. There is so much they can do with it. Making it look like horn is just astounding. If the stuff were stable, I would be a big time Celluloid collector. Since it's not I think I've divested myself of all Celluloid except one or maybe two and am avoiding it like the plague for new purchases.
Forged on the anvil of discipline.
The Few. The Proud.
Jerry D.

This country has become more about sub-groups than about it's unity as a nation.

"The #72 pattern has got to be pretty close to the perfect knife."
--T.J. Murphy 2012
Big Barn
Posts: 181
Joined: Thu Aug 04, 2011 9:54 pm
Location: Columbus OH

Re: Schrade Cut Co Jack to Easy Opener

Post by Big Barn »

Excellent work ! I'd carry it with pride ::ds::
User avatar
singin46
Posts: 8126
Joined: Thu Feb 08, 2007 6:57 am
Location: MUSIC CITY

Re: Schrade Cut Co Jack to Easy Opener

Post by singin46 »

Been carryin this one for 2 weeks now and let me tell ya, Dale's rebuilds are solid!
Image
Love all Jacks
User avatar
orvet
Gold Tier
Gold Tier
Posts: 19902
Joined: Tue May 16, 2006 6:23 am
Location: Willamette Valley, Oregon

Re: Schrade Cut Co Jack to Easy Opener

Post by orvet »

Wow Perry, I am impressed.
That knife looks a lot better in your picture than it does in my scans! ::tu:: ::tu::
Dale
AAPK Administrator

Please visit my AAPK store: www.allaboutpocketknives.com/orvet

Job 13:15

"Buy more ammo!" - Johnnie Fain
“Evil is Powerless If The Good are Unafraid.” – Ronald Reagan
User avatar
singin46
Posts: 8126
Joined: Thu Feb 08, 2007 6:57 am
Location: MUSIC CITY

Re: Schrade Cut Co Jack to Easy Opener

Post by singin46 »

Thanks Dale! It's a great little EO, I carry it everyday and am always playin with it between songs I work on during the day. ::nod::
Love all Jacks
Post Reply

Return to “Customized Factory Knives”